Re: [PATCH] media: iris: Fix ffmpeg corrupted frame error

[Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>]

On 10/6/2025 2:48 PM, Vishnu Reddy wrote:
> When the ffmpeg decoder is running, the driver receives the
> V4L2_BUF_FLAG_KEYFRAME flag in the input buffer. The driver then forwards
> this flag information to the firmware. The firmware, in turn, copies the
> input buffer flags directly into the output buffer flags. Upon receiving
> the output buffer from the firmware, the driver observes that the buffer
> contains the HFI_BUFFERFLAG_DATACORRUPT flag. The root cause is that both
> V4L2_BUF_FLAG_KEYFRAME and HFI_BUFFERFLAG_DATACORRUPT are the same value.
> As a result, the driver incorrectly interprets the output frame as
> corrupted, even though the frame is actually valid. This misinterpretation
> causes the driver to report an error and skip good frames, leading to
> missing frames in the final video output and triggering ffmpeg's "corrupt
> decoded frame" error.
> 
> To resolve this issue, the input buffer flags should not be sent to the
> firmware during decoding, since the firmware does not require this
> information.
> 
> Fixes: 17f2a485ca67 ("media: iris: implement vb2 ops for buf_queue and firmware response")
> Cc: stable@vger.kernel.org
> Signed-off-by: Vishnu Reddy <quic_bvisredd@quicinc.com>
> ---
>  drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c b/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
> index e1788c266bb1..4de03f31eaf3 100644
> --- a/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
> +++ b/drivers/media/platform/qcom/iris/iris_hfi_gen1_command.c
> @@ -282,7 +282,7 @@ static int iris_hfi_gen1_queue_input_buffer(struct iris_inst *inst, struct iris_
>  		com_ip_pkt.shdr.session_id = inst->session_id;
>  		com_ip_pkt.time_stamp_hi = upper_32_bits(buf->timestamp);
>  		com_ip_pkt.time_stamp_lo = lower_32_bits(buf->timestamp);
> -		com_ip_pkt.flags = buf->flags;
> +		com_ip_pkt.flags = 0;
>  		com_ip_pkt.mark_target = 0;
>  		com_ip_pkt.mark_data = 0;
>  		com_ip_pkt.offset = buf->data_offset;

Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>

Thanks,
Dikshita