diff --git a/drivers/clk/qcom/camcc-sc8280xp.c b/drivers/clk/qcom/camcc-sc8280xp.c
index 18f5a3eb313e1..a7d2a86ddaa36 100644
--- a/drivers/clk/qcom/camcc-sc8280xp.c
+++ b/drivers/clk/qcom/camcc-sc8280xp.c
@@ -8,7 +8,6 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
@@ -2995,6 +2994,8 @@ static const struct qcom_cc_desc camcc_sc8280xp_desc = {
 	.num_resets = ARRAY_SIZE(camcc_sc8280xp_resets),
 	.gdscs = camcc_sc8280xp_gdscs,
 	.num_gdscs = ARRAY_SIZE(camcc_sc8280xp_gdscs),
+	.use_rpm = true,
+	.cc_gdsc = &titan_top_gdsc,
 };
 
 static const struct of_device_id camcc_sc8280xp_match_table[] = {
@@ -3008,19 +3009,9 @@ static int camcc_sc8280xp_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	int ret;
 
-	ret = devm_pm_runtime_enable(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret)
-		return ret;
-
 	regmap = qcom_cc_map(pdev, &camcc_sc8280xp_desc);
-	if (IS_ERR(regmap)) {
-		ret = PTR_ERR(regmap);
-		goto err_put_rpm;
-	}
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
 
 	clk_lucid_pll_configure(&camcc_pll0, regmap, &camcc_pll0_config);
 	clk_lucid_pll_configure(&camcc_pll1, regmap, &camcc_pll1_config);
@@ -3038,14 +3029,10 @@ static int camcc_sc8280xp_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_disable;
 
-	pm_runtime_put(&pdev->dev);
-
 	return 0;
 
 err_disable:
 	regmap_update_bits(regmap, 0xc1e4, BIT(0), 0);
-err_put_rpm:
-	pm_runtime_put_sync(&pdev->dev);
 
 	return ret;
 }