Re: [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address

[Balakrishna Godavarthi <bgodavar@codeaurora.org>]

Hi Marcel,

On 2018-12-28 17:37, Balakrishna Godavarthi wrote:
> This patch add qca_set_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
> 
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>  drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
>  drivers/bluetooth/btqca.h   |  8 +++++++-
>  drivers/bluetooth/hci_qca.c |  5 ++++-
>  3 files changed, 30 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ec9e03a6b778..612268574fc7 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
> baudrate,
>  }
>  EXPORT_SYMBOL_GPL(qca_uart_setup);
> 
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> +{
> +	struct sk_buff *skb;
> +	int err;
> +
> +	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
> +				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
> +		return err;
> +	}
> +
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_set_bdaddr);
> +
>  MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
>  MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver
> " VERSION);
>  MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 0c01f375fe83..c72c56ea7480 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -20,6 +20,7 @@
> 
>  #define EDL_PATCH_CMD_OPCODE		(0xFC00)
>  #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
> +#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
>  #define EDL_PATCH_CMD_LEN		(1)
>  #define EDL_PATCH_VER_REQ_CMD		(0x19)
>  #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
> @@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
> const bdaddr_t *bdaddr);
>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  		   enum qca_btsoc_type soc_type, u32 soc_ver);
>  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
> -
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>  #else
> 
>  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const
> bdaddr_t *bdaddr)
> @@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct
> hci_dev *hdev, u32 *soc_version)
>  	return -EOPNOTSUPP;
>  }
> 
> +static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t 
> *bdaddr)
> +{
> +	return -EOPNOTSUPP;
> +}
> +
>  #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f036c8f98ea3..53ac5ade532b 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
>  	}
> 
>  	/* Setup bdaddr */
> -	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> +	if (qcadev->btsoc_type == QCA_WCN3990)
> +		hu->hdev->set_bdaddr = qca_set_bdaddr;
> +	else
> +		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> 
>  	return ret;
>  }


Can you pls review this change.

-- 
Regards
Balakrishna.