From: Jessica Zhang <quic_jesszhan@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
"David Airlie" <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>
Cc: <linux-arm-msm@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 06/14] drm/msm/hdmi: switch to clk_bulk API
Date: Tue, 18 Jun 2024 16:51:51 -0700 [thread overview]
Message-ID: <badbf856-1b6d-42cd-880d-cdde2f293a86@quicinc.com> (raw)
In-Reply-To: <20240522-fd-hdmi-hpd-v2-6-c30bdb7c5c7e@linaro.org>
On 5/22/2024 3:50 AM, Dmitry Baryshkov wrote:
> The last platform using legacy clock names for HDMI block (APQ8064)
> switched to new clock names in 5.16. It's time to stop caring about old
> DT, drop hand-coded helpers and switch to clk_bulk_* API.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
> drivers/gpu/drm/msm/hdmi/hdmi.c | 15 +++++---------
> drivers/gpu/drm/msm/hdmi/hdmi.h | 2 +-
> drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 39 +++++++++++++------------------------
> 3 files changed, 19 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
> index c14e009f38b1..7ec4ca3b7597 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
> @@ -469,17 +469,12 @@ static int msm_hdmi_dev_probe(struct platform_device *pdev)
> if (!hdmi->hpd_clks)
> return -ENOMEM;
>
> - for (i = 0; i < config->hpd_clk_cnt; i++) {
> - struct clk *clk;
> + for (i = 0; i < config->hpd_clk_cnt; i++)
> + hdmi->hpd_clks[i].id = config->hpd_clk_names[i];
>
> - clk = msm_clk_get(pdev, config->hpd_clk_names[i]);
> - if (IS_ERR(clk))
> - return dev_err_probe(dev, PTR_ERR(clk),
> - "failed to get hpd clk: %s\n",
> - config->hpd_clk_names[i]);
> -
> - hdmi->hpd_clks[i] = clk;
> - }
> + ret = devm_clk_bulk_get(&pdev->dev, config->hpd_clk_cnt, hdmi->hpd_clks);
> + if (ret)
> + return ret;
>
> hdmi->extp_clk = devm_clk_get_optional(&pdev->dev, "extp");
> if (IS_ERR(hdmi->extp_clk))
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
> index c0d60ed23b75..eeba85ffef09 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.h
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
> @@ -50,7 +50,7 @@ struct hdmi {
>
> struct regulator_bulk_data *hpd_regs;
> struct regulator_bulk_data *pwr_regs;
> - struct clk **hpd_clks;
> + struct clk_bulk_data *hpd_clks;
> struct clk *extp_clk;
>
> struct gpio_desc *hpd_gpiod;
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> index 7ae69b14e953..36266aa626dc 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> @@ -60,27 +60,6 @@ static void msm_hdmi_phy_reset(struct hdmi *hdmi)
> }
> }
>
> -static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
> -{
> - const struct hdmi_platform_config *config = hdmi->config;
> - struct device *dev = &hdmi->pdev->dev;
> - int i, ret;
> -
> - if (enable) {
> - for (i = 0; i < config->hpd_clk_cnt; i++) {
> - ret = clk_prepare_enable(hdmi->hpd_clks[i]);
> - if (ret) {
> - DRM_DEV_ERROR(dev,
> - "failed to enable hpd clk: %s (%d)\n",
> - config->hpd_clk_names[i], ret);
> - }
> - }
> - } else {
> - for (i = config->hpd_clk_cnt - 1; i >= 0; i--)
> - clk_disable_unprepare(hdmi->hpd_clks[i]);
> - }
> -}
> -
> int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
> {
> struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> @@ -107,7 +86,9 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
> gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
>
> pm_runtime_get_sync(dev);
> - enable_hpd_clocks(hdmi, true);
> + ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
> + if (ret)
> + goto fail;
>
> msm_hdmi_set_mode(hdmi, false);
> msm_hdmi_phy_reset(hdmi);
> @@ -149,7 +130,7 @@ void msm_hdmi_hpd_disable(struct hdmi *hdmi)
>
> msm_hdmi_set_mode(hdmi, false);
>
> - enable_hpd_clocks(hdmi, false);
> + clk_bulk_disable_unprepare(config->hpd_clk_cnt, hdmi->hpd_clks);
> pm_runtime_put(dev);
>
> ret = pinctrl_pm_select_sleep_state(dev);
> @@ -193,14 +174,20 @@ void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
>
> static enum drm_connector_status detect_reg(struct hdmi *hdmi)
> {
> - uint32_t hpd_int_status;
> + const struct hdmi_platform_config *config = hdmi->config;
> + uint32_t hpd_int_status = 0;
> + int ret;
>
> pm_runtime_get_sync(&hdmi->pdev->dev);
> - enable_hpd_clocks(hdmi, true);
> + ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
> + if (ret)
> + goto out;
>
> hpd_int_status = hdmi_read(hdmi, REG_HDMI_HPD_INT_STATUS);
>
> - enable_hpd_clocks(hdmi, false);
> + clk_bulk_disable_unprepare(config->hpd_clk_cnt, hdmi->hpd_clks);
> +
> +out:
> pm_runtime_put(&hdmi->pdev->dev);
>
> return (hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED) ?
>
> --
> 2.39.2
>
next prev parent reply other threads:[~2024-06-18 23:52 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-22 10:50 [PATCH v2 00/14] drm/msm/hdmi: rework and fix the HPD even generation Dmitry Baryshkov
2024-05-22 10:50 ` [PATCH v2 01/14] drm/msm/hdmi: move the alt_iface clock to the hpd list Dmitry Baryshkov
2024-06-11 18:15 ` Jessica Zhang
2024-05-22 10:50 ` [PATCH v2 02/14] drm/msm/hdmi: simplify extp clock handling Dmitry Baryshkov
2024-06-11 18:16 ` Jessica Zhang
2024-05-22 10:50 ` [PATCH v2 03/14] drm/msm/hdmi: switch to atomic_pre_enable/post_disable Dmitry Baryshkov
2024-06-11 18:17 ` Jessica Zhang
2024-05-22 10:50 ` [PATCH v2 04/14] drm/msm/hdmi: set infoframes on all pre_enable calls Dmitry Baryshkov
2024-06-12 0:04 ` Jessica Zhang
2024-06-12 8:31 ` Dmitry Baryshkov
2024-05-22 10:50 ` [PATCH v2 05/14] drm/msm/hdmi: drop clock frequency assignment Dmitry Baryshkov
2024-06-18 23:02 ` Jessica Zhang
2024-05-22 10:50 ` [PATCH v2 06/14] drm/msm/hdmi: switch to clk_bulk API Dmitry Baryshkov
2024-06-18 23:51 ` Jessica Zhang [this message]
2024-05-22 10:50 ` [PATCH v2 07/14] drm/msm/hdmi: switch to pm_runtime_resume_and_get() Dmitry Baryshkov
2024-06-19 0:00 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 08/14] drm/msm/hdmi: add runtime PM calls to DDC transfer function Dmitry Baryshkov
2024-06-19 0:05 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 09/14] drm/msm/hdmi: implement proper runtime PM handling Dmitry Baryshkov
2024-06-19 17:36 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 10/14] drm/msm/hdmi: rename hpd_clks to pwr_clks Dmitry Baryshkov
2024-06-19 17:55 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 11/14] drm/msm/hdmi: expand the HDMI_CFG macro Dmitry Baryshkov
2024-06-19 18:11 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 12/14] drm/msm/hdmi: drop hpd-gpios support Dmitry Baryshkov
2024-06-19 18:47 ` Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 13/14] drm/msm/hdmi: ensure that HDMI is one if HPD is requested Dmitry Baryshkov
2024-06-12 13:01 ` Markus Elfring
2024-06-12 13:22 ` Dmitry Baryshkov
2024-06-12 14:32 ` [v2 " Markus Elfring
2024-06-12 16:15 ` Dmitry Baryshkov
2024-06-19 22:13 ` [PATCH v2 " Jessica Zhang
2024-05-22 10:51 ` [PATCH v2 14/14] drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge ops Dmitry Baryshkov
2024-06-19 22:14 ` Jessica Zhang
2024-06-12 12:28 ` [v2 00/14] drm/msm/hdmi: rework and fix the HPD even generation Markus Elfring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=badbf856-1b6d-42cd-880d-cdde2f293a86@quicinc.com \
--to=quic_jesszhan@quicinc.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox