Re: [PATCH v5 0/5] Add support for DisplayPort on SA8775P platform

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 18.10.2024 12:08 PM, Dmitry Baryshkov wrote:
> On Fri, Oct 18, 2024 at 12:37:01PM +0530, Soutrik Mukhopadhyay wrote:
>> This series adds support for the DisplayPort controller
>> and eDP PHY v5 found on the Qualcomm SA8775P platform.
>>
>> ---
>> v2: Fixed review comments from Dmitry and Bjorn
>> 	- Made aux_cfg array as const.
>> 	- Reused edp_swing_hbr_rbr and edp_swing_hbr2_hbr3 for v5.
>>
>> v3: Fixed review comments from Dmitry, Konrad and Bjorn
>> 	- Used a for loop to write the dp_phy_aux_cfg registers.
>> 	- Pre-defined the aux_cfg size to prevent any magic numbers.
>> 	- Added all the necessary DPTX controllers for this platform.
>>
>> v4: Fixed review comments from Dmitry and Krzysztof
>> 	- Removed the "reviewed by" and kept only the "acked by" for 
>> 	  patch 1.
>> 	- Updated the commit message of patch 5 to mention specifically
>> 	  about the validation of "only" MDSS0 DPTX0 and DPTX1.
>>
>> v5: Fixed review comment from Dmitry in patch 5
>> 	- Aligned the register starting address for display port as part 
>> 	  of device description with respect to other targets.
>>
>> Below patches are applied:
>>
>> [1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
>>       commit: 7adb3d221a4d6a4f5e0793c3bd35f1168934035c
>> [2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
>>       commit: 913463587d528d766a8e12c7790995e273ec84fb
>> [3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
>>       commit: 3f12bf16213c30d8e645027efd94a19c13ee0253
> 
> Please in future skip applied patches instead of including them into the
> series.  No need to resend the series just for this issue though.

(you would normally do this by rebasing your tree against -next
and having git rebase-skip the ones already present)

Konrad