From: Shazad Hussain <quic_shazhuss@quicinc.com>
To: Brian Masney <bmasney@redhat.com>, <andersson@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
<johan+linaro@kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<ahalaney@redhat.com>, <echanude@redhat.com>
Subject: Re: [PATCH 4/4] arm64: dts: qcom: sc8280xp: add missing spi nodes
Date: Tue, 13 Dec 2022 12:46:18 +0530 [thread overview]
Message-ID: <c1c7b1eb-08e7-2ba5-d89a-e0be8f76fd69@quicinc.com> (raw)
In-Reply-To: <20221212182314.1902632-5-bmasney@redhat.com>
On 12/12/2022 11:53 PM, Brian Masney wrote:
> Add the missing nodes for the spi buses that's present on this SoC.
>
> This work was derived from various patches that Qualcomm delivered
> to Red Hat in a downstream kernel.
>
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 384 +++++++++++++++++++++++++
> 1 file changed, 384 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 392a1509f0be..b50db09feae2 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -829,6 +829,22 @@ qup2_i2c16: i2c@880000 {
> status = "disabled";
> };
>
> + qup2_spi16: spi@880000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00880000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
This is device property not host and same applicable for all below spi
nodes.
Also FYI let's enable below SPI for Qdrive usecases once spidev
compatible name is confirmed.
SE9 0x00A84000
SE22 0x00898000
-Shazad
> + status = "disabled";
> + };
> +
> qup2_i2c17: i2c@884000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00884000 0 0x4000>;
> @@ -845,6 +861,22 @@ qup2_i2c17: i2c@884000 {
> status = "disabled";
> };
>
> + qup2_spi17: spi@884000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00884000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_uart17: serial@884000 {
> compatible = "qcom,geni-uart";
> reg = <0 0x00884000 0 0x4000>;
> @@ -875,6 +907,22 @@ qup2_i2c18: i2c@888000 {
> status = "disabled";
> };
>
> + qup2_spi18: spi@888000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00888000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_i2c19: i2c@88c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x0088c000 0 0x4000>;
> @@ -891,6 +939,22 @@ qup2_i2c19: i2c@88c000 {
> status = "disabled";
> };
>
> + qup2_spi19: spi@88c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x0088c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_i2c20: i2c@890000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00890000 0 0x4000>;
> @@ -907,6 +971,22 @@ qup2_i2c20: i2c@890000 {
> status = "disabled";
> };
>
> + qup2_spi20: spi@890000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00890000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_i2c21: i2c@894000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00894000 0 0x4000>;
> @@ -923,6 +1003,22 @@ qup2_i2c21: i2c@894000 {
> status = "disabled";
> };
>
> + qup2_spi21: spi@894000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00894000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_i2c22: i2c@898000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00898000 0 0x4000>;
> @@ -939,6 +1035,22 @@ qup2_i2c22: i2c@898000 {
> status = "disabled";
> };
>
> + qup2_spi22: spi@898000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00898000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup2_i2c23: i2c@89c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x0089c000 0 0x4000>;
> @@ -954,6 +1066,22 @@ qup2_i2c23: i2c@89c000 {
> interconnect-names = "qup-core", "qup-config", "qup-memory";
> status = "disabled";
> };
> +
> + qup2_spi23: spi@89c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x0089c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
> + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> };
>
> qup0: geniqup@9c0000 {
> @@ -986,6 +1114,22 @@ qup0_i2c0: i2c@980000 {
> status = "disabled";
> };
>
> + qup0_spi0: spi@980000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00980000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c1: i2c@984000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00984000 0 0x4000>;
> @@ -1002,6 +1146,22 @@ qup0_i2c1: i2c@984000 {
> status = "disabled";
> };
>
> + qup0_spi1: spi@984000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00984000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c2: i2c@988000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00988000 0 0x4000>;
> @@ -1018,6 +1178,22 @@ qup0_i2c2: i2c@988000 {
> status = "disabled";
> };
>
> + qup0_spi2: spi@988000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00988000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c3: i2c@98c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x0098c000 0 0x4000>;
> @@ -1034,6 +1210,22 @@ qup0_i2c3: i2c@98c000 {
> status = "disabled";
> };
>
> + qup0_spi3: spi@98c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x0098c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c4: i2c@990000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00990000 0 0x4000>;
> @@ -1050,6 +1242,22 @@ qup0_i2c4: i2c@990000 {
> status = "disabled";
> };
>
> + qup0_spi4: spi@990000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00990000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c5: i2c@994000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00994000 0 0x4000>;
> @@ -1066,6 +1274,22 @@ qup0_i2c5: i2c@994000 {
> status = "disabled";
> };
>
> + qup0_spi5: spi@994000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00994000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c6: i2c@998000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00998000 0 0x4000>;
> @@ -1082,6 +1306,22 @@ qup0_i2c6: i2c@998000 {
> status = "disabled";
> };
>
> + qup0_spi6: spi@998000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00998000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup0_i2c7: i2c@99c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x0099c000 0 0x4000>;
> @@ -1097,6 +1337,22 @@ qup0_i2c7: i2c@99c000 {
> interconnect-names = "qup-core", "qup-config", "qup-memory";
> status = "disabled";
> };
> +
> + qup0_spi7: spi@99c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x0099c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
> + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> };
>
> qup1: geniqup@ac0000 {
> @@ -1129,6 +1385,22 @@ qup1_i2c8: i2c@a80000 {
> status = "disabled";
> };
>
> + qup1_spi8: spi@a80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a80000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c9: i2c@a84000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a84000 0 0x4000>;
> @@ -1145,6 +1417,22 @@ qup1_i2c9: i2c@a84000 {
> status = "disabled";
> };
>
> + qup1_spi9: spi@a84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a84000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c10: i2c@a88000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a88000 0 0x4000>;
> @@ -1161,6 +1449,22 @@ qup1_i2c10: i2c@a88000 {
> status = "disabled";
> };
>
> + qup1_spi10: spi@a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a88000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c11: i2c@a8c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a8c000 0 0x4000>;
> @@ -1177,6 +1481,22 @@ qup1_i2c11: i2c@a8c000 {
> status = "disabled";
> };
>
> + qup1_spi11: spi@a8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a8c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c12: i2c@a90000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a90000 0 0x4000>;
> @@ -1193,6 +1513,22 @@ qup1_i2c12: i2c@a90000 {
> status = "disabled";
> };
>
> + qup1_spi12: spi@a90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a90000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c13: i2c@a94000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a94000 0 0x4000>;
> @@ -1209,6 +1545,22 @@ qup1_i2c13: i2c@a94000 {
> status = "disabled";
> };
>
> + qup1_spi13: spi@a94000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a94000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c14: i2c@a98000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a98000 0 0x4000>;
> @@ -1225,6 +1577,22 @@ qup1_i2c14: i2c@a98000 {
> status = "disabled";
> };
>
> + qup1_spi14: spi@a98000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a98000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> +
> qup1_i2c15: i2c@a9c000 {
> compatible = "qcom,geni-i2c";
> reg = <0 0x00a9c000 0 0x4000>;
> @@ -1240,6 +1608,22 @@ qup1_i2c15: i2c@a9c000 {
> interconnect-names = "qup-core", "qup-config", "qup-memory";
> status = "disabled";
> };
> +
> + qup1_spi15: spi@a9c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a9c000 0 0x4000>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + clock-names = "se";
> + interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + spi-max-frequency = <50000000>;
> + status = "disabled";
> + };
> };
>
> pcie4: pcie@1c00000 {
next prev parent reply other threads:[~2022-12-13 7:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-12 18:23 [PATCH 0/4] arm64: dts: qcom: sc8280xp: add i2c and spi nodes Brian Masney
2022-12-12 18:23 ` [PATCH 1/4] arm64: dts: qcom: sc8280xp: rename i2c5 to i2c21 Brian Masney
2022-12-12 18:48 ` Konrad Dybcio
2022-12-13 14:54 ` Johan Hovold
2022-12-13 15:04 ` Shazad Hussain
2022-12-13 15:19 ` Johan Hovold
2022-12-13 15:05 ` Brian Masney
2022-12-13 15:12 ` Brian Masney
2022-12-13 15:28 ` Johan Hovold
2022-12-13 15:34 ` Shazad Hussain
2022-12-13 15:39 ` Johan Hovold
2022-12-13 15:42 ` Johan Hovold
2022-12-13 15:44 ` Konrad Dybcio
2022-12-13 16:15 ` Johan Hovold
2022-12-13 15:45 ` Shazad Hussain
2022-12-13 15:17 ` Johan Hovold
2022-12-13 15:29 ` Konrad Dybcio
2022-12-13 15:32 ` Johan Hovold
2022-12-13 15:59 ` Brian Masney
2022-12-13 16:22 ` Johan Hovold
2022-12-12 18:23 ` [PATCH 2/4] arm64: dts: qcom: sc8280xp: add missing i2c nodes Brian Masney
2022-12-12 18:23 ` [PATCH 3/4] arm64: dts: qcom: sa8540p-ride: add qup1_i2c15 and qup2_i2c18 nodes Brian Masney
2022-12-13 7:18 ` Shazad Hussain
2022-12-13 14:48 ` Konrad Dybcio
2022-12-14 12:30 ` Brian Masney
2022-12-14 12:52 ` Krzysztof Kozlowski
2022-12-14 14:19 ` Brian Masney
2022-12-14 12:53 ` Konrad Dybcio
2022-12-14 15:36 ` Shazad Hussain
2022-12-14 16:24 ` Brian Masney
2022-12-13 14:59 ` Johan Hovold
2022-12-14 12:51 ` Krzysztof Kozlowski
2022-12-12 18:23 ` [PATCH 4/4] arm64: dts: qcom: sc8280xp: add missing spi nodes Brian Masney
2022-12-13 7:16 ` Shazad Hussain [this message]
2022-12-13 12:27 ` Brian Masney
2022-12-13 12:47 ` Mark Brown
2022-12-13 13:02 ` Krzysztof Kozlowski
2022-12-13 13:08 ` Javier Martinez Canillas
2022-12-13 14:36 ` Brian Masney
2022-12-13 14:45 ` Shazad Hussain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c1c7b1eb-08e7-2ba5-d89a-e0be8f76fd69@quicinc.com \
--to=quic_shazhuss@quicinc.com \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=bmasney@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=echanude@redhat.com \
--cc=johan+linaro@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox