* [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models
@ 2025-03-01 9:24 Dmitry Baryshkov
2025-03-01 9:24 ` [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 Dmitry Baryshkov
` (5 more replies)
0 siblings, 6 replies; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
During one of the chats Abhinav pointed out that in the 1.x generation
most of the DPU/MDP5 instances didn't have DSC support. Also SDM630
didn't provide DSC support. Disable DSC on those platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes in v2:
- Fixed commit messages (Konrad)
- Dropped TE2 bits and pieces, they are unused in the upstream driver.
- Link to v1: https://lore.kernel.org/r/20250228-dpu-fix-catalog-v1-0-b05d22fbc2b4@linaro.org
---
Dmitry Baryshkov (5):
drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937
drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917
drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953
drm/msm/dpu: drop TE2 definitions
drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630
.../gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h | 2 --
.../gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h | 1 -
.../gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h | 2 --
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 6 +++---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 17 -----------------
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-----
10 files changed, 20 insertions(+), 46 deletions(-)
---
base-commit: be5c7bbb3a64baf884481a1ba0c2f8fb2f93f7c3
change-id: 20250228-dpu-fix-catalog-649db1fc29a6
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
@ 2025-03-01 9:24 ` Dmitry Baryshkov
2025-04-29 0:37 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917 Dmitry Baryshkov
` (4 subsequent siblings)
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
The MSM8937 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: c079680bb0fa ("drm/msm/dpu: Add support for MSM8937")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h
index ab3dfb0b374ead36c7f07b0a77c703fb2c09ff8a..a848f825c5948c5819758e131af60b83b543b15a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h
@@ -100,14 +100,12 @@ static const struct dpu_pingpong_cfg msm8937_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_MSM8996_MASK,
.sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_MSM8996_MASK,
.sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
--
2.39.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
2025-03-01 9:24 ` [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 Dmitry Baryshkov
@ 2025-03-01 9:24 ` Dmitry Baryshkov
2025-04-29 1:00 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953 Dmitry Baryshkov
` (3 subsequent siblings)
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
The MSM8917 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: 62af6e1cb596 ("drm/msm/dpu: Add support for MSM8917")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h
index 6bdaecca676144f9162ab1839d99f3e2e3386dc7..6f2c40b303e2b017fc3f913563a1a251779a9124 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h
@@ -93,7 +93,6 @@ static const struct dpu_pingpong_cfg msm8917_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_MSM8996_MASK,
.sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
--
2.39.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
2025-03-01 9:24 ` [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 Dmitry Baryshkov
2025-03-01 9:24 ` [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917 Dmitry Baryshkov
@ 2025-03-01 9:24 ` Dmitry Baryshkov
2025-04-29 1:21 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions Dmitry Baryshkov
` (2 subsequent siblings)
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
The MSM8953 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask and, as it is the only remaining bit,
drop the .features assignment completely.
Fixes: 7a6109ce1c2c ("drm/msm/dpu: Add support for MSM8953")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
index 14f36ea6ad0eb61e87f043437a8cd78bb1bde49c..04f2021a7bef1bdefee77ab34074c06713f80487 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h
@@ -100,14 +100,12 @@ static const struct dpu_pingpong_cfg msm8953_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_MSM8996_MASK,
.sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_MSM8996_MASK,
.sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
--
2.39.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
` (2 preceding siblings ...)
2025-03-01 9:24 ` [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953 Dmitry Baryshkov
@ 2025-03-01 9:24 ` Dmitry Baryshkov
2025-04-29 1:33 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630 Dmitry Baryshkov
2025-05-04 16:13 ` [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel
Neither DPU driver nor vendor SDE driver do not use TE2 definitions
(and, in case of SDE driver, never did). Semantics of the TE2 feature
bit and .te2 sblk are not completely clear. Drop these bits from the
catalog with the possibility of reintroducing them later if we need to
support ppsplit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 17 -----------------
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-----
7 files changed, 19 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h
index 491f6f5827d151011dd3f74bef2a4b8bf69591ab..400739295de5aa509ed3a7f6c82ef45dda21c47f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h
@@ -181,15 +181,15 @@ static const struct dpu_pingpong_cfg msm8996_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_MSM8996_TE2_MASK,
- .sblk = &msm8996_pp_sblk_te,
+ .features = PINGPONG_MSM8996_MASK,
+ .sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_MSM8996_TE2_MASK,
- .sblk = &msm8996_pp_sblk_te,
+ .features = PINGPONG_MSM8996_MASK,
+ .sblk = &msm8996_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
}, {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
index 64c94e919a69804599916404dff59fa4a6ac6cff..a253e0fdc556b57aa3752b81b803e84550ba146e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
@@ -170,15 +170,15 @@ static const struct dpu_pingpong_cfg msm8998_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
}, {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h
index 424815e7fb7dd858448bd41b5368b729373035f8..4464d4568aba0577a6f957bbd5d8d1c73f68b403 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h
@@ -141,15 +141,15 @@ static const struct dpu_pingpong_cfg sdm660_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
}, {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
index df01227fc36468f4945c03e767e1409ea4fc0896..3aed9aa4c533f167ece7b4a5eb84fe49c4929df5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
@@ -115,8 +115,8 @@ static const struct dpu_pingpong_cfg sdm630_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
index 72bd4f7e9e504c771d999dcf6277fceb169cffca..c122782ec8bd7e5ad68729c8c12bc8ccd0cfe0c2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
@@ -194,15 +194,15 @@ static const struct dpu_pingpong_cfg sdm845_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_1", .id = PINGPONG_1,
.base = 0x70800, .len = 0xd4,
- .features = PINGPONG_SDM845_TE2_MASK,
- .sblk = &sdm845_pp_sblk_te,
+ .features = PINGPONG_SDM845_MASK,
+ .sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
}, {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 0b342c043875f3329a9f71c5e751b2244f9f5ef7..b67578738dffe1ac83530d93eb0e631f21384efc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -98,15 +98,9 @@
#define PINGPONG_MSM8996_MASK \
(BIT(DPU_PINGPONG_DSC))
-#define PINGPONG_MSM8996_TE2_MASK \
- (PINGPONG_MSM8996_MASK | BIT(DPU_PINGPONG_TE2))
-
#define PINGPONG_SDM845_MASK \
(BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_DSC))
-#define PINGPONG_SDM845_TE2_MASK \
- (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
-
#define PINGPONG_SM8150_MASK \
(BIT(DPU_PINGPONG_DITHER) | BIT(DPU_PINGPONG_DSC))
@@ -465,22 +459,11 @@ static const struct dpu_dspp_sub_blks sdm845_dspp_sblk = {
/*************************************************************
* PINGPONG sub blocks config
*************************************************************/
-static const struct dpu_pingpong_sub_blks msm8996_pp_sblk_te = {
- .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
- .version = 0x1},
-};
static const struct dpu_pingpong_sub_blks msm8996_pp_sblk = {
/* No dither block */
};
-static const struct dpu_pingpong_sub_blks sdm845_pp_sblk_te = {
- .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
- .version = 0x1},
- .dither = {.name = "dither", .base = 0x30e0,
- .len = 0x20, .version = 0x10000},
-};
-
static const struct dpu_pingpong_sub_blks sdm845_pp_sblk = {
.dither = {.name = "dither", .base = 0x30e0,
.len = 0x20, .version = 0x10000},
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 4cea19e1a20380c56ae014f2d33a6884a72e0ca0..07b50e23ee954b96e7e6bd684dc12823f99d630b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -115,7 +115,6 @@ enum {
/**
* PINGPONG sub-blocks
- * @DPU_PINGPONG_TE2 Additional tear check block for split pipes
* @DPU_PINGPONG_SPLIT PP block supports split fifo
* @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
* @DPU_PINGPONG_DITHER Dither blocks
@@ -123,8 +122,7 @@ enum {
* @DPU_PINGPONG_MAX
*/
enum {
- DPU_PINGPONG_TE2 = 0x1,
- DPU_PINGPONG_SPLIT,
+ DPU_PINGPONG_SPLIT = 0x1,
DPU_PINGPONG_SLAVE,
DPU_PINGPONG_DITHER,
DPU_PINGPONG_DSC,
@@ -404,8 +402,6 @@ struct dpu_dspp_sub_blks {
};
struct dpu_pingpong_sub_blks {
- struct dpu_pp_blk te;
- struct dpu_pp_blk te2;
struct dpu_pp_blk dither;
};
--
2.39.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
` (3 preceding siblings ...)
2025-03-01 9:24 ` [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions Dmitry Baryshkov
@ 2025-03-01 9:24 ` Dmitry Baryshkov
2025-04-29 2:01 ` Abhinav Kumar
2025-05-04 16:13 ` [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-03-01 9:24 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel
The SDM630 platform doesn't have DSC blocks nor does have it DSC
registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
from the PINGPONG's feature mask, replacing PINGPONG_SDM845_MASK with
BIT(DPU_PINGPONG_DITHER).
Fixes: 7204df5e7e68 ("drm/msm/dpu: add support for SDM660 and SDM630 platforms")
Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Note, Konrad pointed out that vendor DT doesn't define DIPTHER support
for this platform, however I believe this is because support for this
platform predates DITHER support in the vendor kernels.
---
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
index 3aed9aa4c533f167ece7b4a5eb84fe49c4929df5..99c0f824d8f00474812bde12e7d83ba3de1834f1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
@@ -115,14 +115,14 @@ static const struct dpu_pingpong_cfg sdm630_pp[] = {
{
.name = "pingpong_0", .id = PINGPONG_0,
.base = 0x70000, .len = 0xd4,
- .features = PINGPONG_SDM845_MASK,
+ .features = BIT(DPU_PINGPONG_DITHER),
.sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
}, {
.name = "pingpong_2", .id = PINGPONG_2,
.base = 0x71000, .len = 0xd4,
- .features = PINGPONG_SDM845_MASK,
+ .features = BIT(DPU_PINGPONG_DITHER),
.sblk = &sdm845_pp_sblk,
.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
.intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14),
--
2.39.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937
2025-03-01 9:24 ` [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 Dmitry Baryshkov
@ 2025-04-29 0:37 ` Abhinav Kumar
0 siblings, 0 replies; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 0:37 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> The MSM8937 platform doesn't have DSC blocks nor does have it DSC
> registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
> from the PINGPONG's feature mask and, as it is the only remaining bit,
> drop the .features assignment completely.
>
> Fixes: c079680bb0fa ("drm/msm/dpu: Add support for MSM8937")
> Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_14_msm8937.h | 2 --
> 1 file changed, 2 deletions(-)
>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917
2025-03-01 9:24 ` [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917 Dmitry Baryshkov
@ 2025-04-29 1:00 ` Abhinav Kumar
0 siblings, 0 replies; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 1:00 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> The MSM8917 platform doesn't have DSC blocks nor does have it DSC
> registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
> from the PINGPONG's feature mask and, as it is the only remaining bit,
> drop the .features assignment completely.
>
> Fixes: 62af6e1cb596 ("drm/msm/dpu: Add support for MSM8917")
> Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_15_msm8917.h | 1 -
> 1 file changed, 1 deletion(-)
>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953
2025-03-01 9:24 ` [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953 Dmitry Baryshkov
@ 2025-04-29 1:21 ` Abhinav Kumar
0 siblings, 0 replies; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 1:21 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> The MSM8953 platform doesn't have DSC blocks nor does have it DSC
> registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
> from the PINGPONG's feature mask and, as it is the only remaining bit,
> drop the .features assignment completely.
>
> Fixes: 7a6109ce1c2c ("drm/msm/dpu: Add support for MSM8953")
> Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h | 2 --
> 1 file changed, 2 deletions(-)
>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions
2025-03-01 9:24 ` [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions Dmitry Baryshkov
@ 2025-04-29 1:33 ` Abhinav Kumar
2025-04-29 12:16 ` Dmitry Baryshkov
0 siblings, 1 reply; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 1:33 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel
On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> Neither DPU driver nor vendor SDE driver do not use TE2 definitions
> (and, in case of SDE driver, never did). Semantics of the TE2 feature
> bit and .te2 sblk are not completely clear. Drop these bits from the
> catalog with the possibility of reintroducing them later if we need to
> support ppsplit.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 8 ++++----
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 ++++----
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h | 8 ++++----
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 8 ++++----
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 17 -----------------
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-----
> 7 files changed, 19 insertions(+), 40 deletions(-)
>
<snip>
>
> @@ -465,22 +459,11 @@ static const struct dpu_dspp_sub_blks sdm845_dspp_sblk = {
> /*************************************************************
> * PINGPONG sub blocks config
> *************************************************************/
> -static const struct dpu_pingpong_sub_blks msm8996_pp_sblk_te = {
> - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
> - .version = 0x1},
> -};
>
> static const struct dpu_pingpong_sub_blks msm8996_pp_sblk = {
> /* No dither block */
> };
>
> -static const struct dpu_pingpong_sub_blks sdm845_pp_sblk_te = {
> - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
> - .version = 0x1},
> - .dither = {.name = "dither", .base = 0x30e0,
> - .len = 0x20, .version = 0x10000},
> -};
> -
Agreed about TE2. I do not see even te2 sub-block programming in
dpu_hw_pingpong but why do we also need to drop dither?
That one is being used in dpu_hw_pp_setup_dither().
> static const struct dpu_pingpong_sub_blks sdm845_pp_sblk = {
> .dither = {.name = "dither", .base = 0x30e0,
> .len = 0x20, .version = 0x10000},
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 4cea19e1a20380c56ae014f2d33a6884a72e0ca0..07b50e23ee954b96e7e6bd684dc12823f99d630b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -115,7 +115,6 @@ enum {
>
> /**
> * PINGPONG sub-blocks
> - * @DPU_PINGPONG_TE2 Additional tear check block for split pipes
> * @DPU_PINGPONG_SPLIT PP block supports split fifo
> * @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
> * @DPU_PINGPONG_DITHER Dither blocks
> @@ -123,8 +122,7 @@ enum {
> * @DPU_PINGPONG_MAX
> */
> enum {
> - DPU_PINGPONG_TE2 = 0x1,
> - DPU_PINGPONG_SPLIT,
> + DPU_PINGPONG_SPLIT = 0x1,
> DPU_PINGPONG_SLAVE,
> DPU_PINGPONG_DITHER,
> DPU_PINGPONG_DSC,
> @@ -404,8 +402,6 @@ struct dpu_dspp_sub_blks {
> };
>
> struct dpu_pingpong_sub_blks {
> - struct dpu_pp_blk te;
> - struct dpu_pp_blk te2;
> struct dpu_pp_blk dither;
> };
>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630
2025-03-01 9:24 ` [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630 Dmitry Baryshkov
@ 2025-04-29 2:01 ` Abhinav Kumar
0 siblings, 0 replies; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 2:01 UTC (permalink / raw)
To: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel
On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> The SDM630 platform doesn't have DSC blocks nor does have it DSC
> registers in the PINGPONG block. Drop the DPU_PINGPONG_DSC feature bit
> from the PINGPONG's feature mask, replacing PINGPONG_SDM845_MASK with
> BIT(DPU_PINGPONG_DITHER).
>
> Fixes: 7204df5e7e68 ("drm/msm/dpu: add support for SDM660 and SDM630 platforms")
> Reported-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> ---
> Note, Konrad pointed out that vendor DT doesn't define DIPTHER support
> for this platform, however I believe this is because support for this
> platform predates DITHER support in the vendor kernels.
> ---
Yes this is correct. This chipset has dither support in ping-pong.
> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
> index 3aed9aa4c533f167ece7b4a5eb84fe49c4929df5..99c0f824d8f00474812bde12e7d83ba3de1834f1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h
> @@ -115,14 +115,14 @@ static const struct dpu_pingpong_cfg sdm630_pp[] = {
> {
> .name = "pingpong_0", .id = PINGPONG_0,
> .base = 0x70000, .len = 0xd4,
> - .features = PINGPONG_SDM845_MASK,
> + .features = BIT(DPU_PINGPONG_DITHER),
> .sblk = &sdm845_pp_sblk,
> .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> .intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
> }, {
> .name = "pingpong_2", .id = PINGPONG_2,
> .base = 0x71000, .len = 0xd4,
> - .features = PINGPONG_SDM845_MASK,
> + .features = BIT(DPU_PINGPONG_DITHER),
> .sblk = &sdm845_pp_sblk,
> .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> .intr_rdptr = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 14),
>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions
2025-04-29 1:33 ` Abhinav Kumar
@ 2025-04-29 12:16 ` Dmitry Baryshkov
2025-04-29 18:27 ` Abhinav Kumar
0 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-04-29 12:16 UTC (permalink / raw)
To: Abhinav Kumar
Cc: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio, linux-arm-msm, dri-devel, freedreno, linux-kernel
On Mon, Apr 28, 2025 at 06:33:05PM -0700, Abhinav Kumar wrote:
>
>
> On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
> > Neither DPU driver nor vendor SDE driver do not use TE2 definitions
> > (and, in case of SDE driver, never did). Semantics of the TE2 feature
> > bit and .te2 sblk are not completely clear. Drop these bits from the
> > catalog with the possibility of reintroducing them later if we need to
> > support ppsplit.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> > drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 8 ++++----
> > drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 ++++----
> > drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h | 8 ++++----
> > drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
> > drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 8 ++++----
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 17 -----------------
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-----
> > 7 files changed, 19 insertions(+), 40 deletions(-)
> >
>
> <snip>
>
> > @@ -465,22 +459,11 @@ static const struct dpu_dspp_sub_blks sdm845_dspp_sblk = {
> > /*************************************************************
> > * PINGPONG sub blocks config
> > *************************************************************/
> > -static const struct dpu_pingpong_sub_blks msm8996_pp_sblk_te = {
> > - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
> > - .version = 0x1},
> > -};
> > static const struct dpu_pingpong_sub_blks msm8996_pp_sblk = {
> > /* No dither block */
> > };
> > -static const struct dpu_pingpong_sub_blks sdm845_pp_sblk_te = {
> > - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
> > - .version = 0x1},
> > - .dither = {.name = "dither", .base = 0x30e0,
> > - .len = 0x20, .version = 0x10000},
> > -};
> > -
>
> Agreed about TE2. I do not see even te2 sub-block programming in
> dpu_hw_pingpong but why do we also need to drop dither?
sdm845_pp_sblk has the dither block. If you scroll the original patch,
you'd see PPs being switched to that sblk definition.
>
> That one is being used in dpu_hw_pp_setup_dither().
>
> > static const struct dpu_pingpong_sub_blks sdm845_pp_sblk = {
> > .dither = {.name = "dither", .base = 0x30e0,
> > .len = 0x20, .version = 0x10000},
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > index 4cea19e1a20380c56ae014f2d33a6884a72e0ca0..07b50e23ee954b96e7e6bd684dc12823f99d630b 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> > @@ -115,7 +115,6 @@ enum {
> > /**
> > * PINGPONG sub-blocks
> > - * @DPU_PINGPONG_TE2 Additional tear check block for split pipes
> > * @DPU_PINGPONG_SPLIT PP block supports split fifo
> > * @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
> > * @DPU_PINGPONG_DITHER Dither blocks
> > @@ -123,8 +122,7 @@ enum {
> > * @DPU_PINGPONG_MAX
> > */
> > enum {
> > - DPU_PINGPONG_TE2 = 0x1,
> > - DPU_PINGPONG_SPLIT,
> > + DPU_PINGPONG_SPLIT = 0x1,
> > DPU_PINGPONG_SLAVE,
> > DPU_PINGPONG_DITHER,
> > DPU_PINGPONG_DSC,
> > @@ -404,8 +402,6 @@ struct dpu_dspp_sub_blks {
> > };
> > struct dpu_pingpong_sub_blks {
> > - struct dpu_pp_blk te;
> > - struct dpu_pp_blk te2;
> > struct dpu_pp_blk dither;
> > };
> >
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions
2025-04-29 12:16 ` Dmitry Baryshkov
@ 2025-04-29 18:27 ` Abhinav Kumar
0 siblings, 0 replies; 15+ messages in thread
From: Abhinav Kumar @ 2025-04-29 18:27 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Dmitry Baryshkov, Rob Clark, Sean Paul, Marijn Suijten,
David Airlie, Simona Vetter, Barnabás Czémán,
Konrad Dybcio, linux-arm-msm, dri-devel, freedreno, linux-kernel
On 4/29/2025 5:16 AM, Dmitry Baryshkov wrote:
> On Mon, Apr 28, 2025 at 06:33:05PM -0700, Abhinav Kumar wrote:
>>
>>
>> On 3/1/2025 1:24 AM, Dmitry Baryshkov wrote:
>>> Neither DPU driver nor vendor SDE driver do not use TE2 definitions
>>> (and, in case of SDE driver, never did). Semantics of the TE2 feature
>>> bit and .te2 sblk are not completely clear. Drop these bits from the
>>> catalog with the possibility of reintroducing them later if we need to
>>> support ppsplit.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h | 8 ++++----
>>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 ++++----
>>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_2_sdm660.h | 8 ++++----
>>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_3_sdm630.h | 4 ++--
>>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 8 ++++----
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 17 -----------------
>>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-----
>>> 7 files changed, 19 insertions(+), 40 deletions(-)
>>>
>>
>> <snip>
>>
>>> @@ -465,22 +459,11 @@ static const struct dpu_dspp_sub_blks sdm845_dspp_sblk = {
>>> /*************************************************************
>>> * PINGPONG sub blocks config
>>> *************************************************************/
>>> -static const struct dpu_pingpong_sub_blks msm8996_pp_sblk_te = {
>>> - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
>>> - .version = 0x1},
>>> -};
>>> static const struct dpu_pingpong_sub_blks msm8996_pp_sblk = {
>>> /* No dither block */
>>> };
>>> -static const struct dpu_pingpong_sub_blks sdm845_pp_sblk_te = {
>>> - .te2 = {.name = "te2", .base = 0x2000, .len = 0x0,
>>> - .version = 0x1},
>>> - .dither = {.name = "dither", .base = 0x30e0,
>>> - .len = 0x20, .version = 0x10000},
>>> -};
>>> -
>>
>> Agreed about TE2. I do not see even te2 sub-block programming in
>> dpu_hw_pingpong but why do we also need to drop dither?
>
> sdm845_pp_sblk has the dither block. If you scroll the original patch,
> you'd see PPs being switched to that sblk definition.
>
Ack,
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
` (4 preceding siblings ...)
2025-03-01 9:24 ` [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630 Dmitry Baryshkov
@ 2025-05-04 16:13 ` Dmitry Baryshkov
2025-05-19 10:58 ` Dmitry Baryshkov
5 siblings, 1 reply; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-05-04 16:13 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio,
Dmitry Baryshkov
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
On Sat, 01 Mar 2025 11:24:53 +0200, Dmitry Baryshkov wrote:
> During one of the chats Abhinav pointed out that in the 1.x generation
> most of the DPU/MDP5 instances didn't have DSC support. Also SDM630
> didn't provide DSC support. Disable DSC on those platforms.
>
>
Applied, thanks!
[1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937
https://gitlab.freedesktop.org/lumag/msm/-/commit/b43c524134e0
[2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917
https://gitlab.freedesktop.org/lumag/msm/-/commit/5be98120115c
[3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953
https://gitlab.freedesktop.org/lumag/msm/-/commit/5232a29ebc74
[4/5] drm/msm/dpu: drop TE2 definitions
https://gitlab.freedesktop.org/lumag/msm/-/commit/e1fbb0d78e86
[5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630
https://gitlab.freedesktop.org/lumag/msm/-/commit/075667e986f3
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models
2025-05-04 16:13 ` [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
@ 2025-05-19 10:58 ` Dmitry Baryshkov
0 siblings, 0 replies; 15+ messages in thread
From: Dmitry Baryshkov @ 2025-05-19 10:58 UTC (permalink / raw)
To: Rob Clark, Abhinav Kumar, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Barnabás Czémán, Konrad Dybcio,
Dmitry Baryshkov
Cc: linux-arm-msm, dri-devel, freedreno, linux-kernel, Konrad Dybcio
On Sat, 01 Mar 2025 11:24:53 +0200, Dmitry Baryshkov wrote:
> During one of the chats Abhinav pointed out that in the 1.x generation
> most of the DPU/MDP5 instances didn't have DSC support. Also SDM630
> didn't provide DSC support. Disable DSC on those platforms.
>
>
Applied, thanks!
[1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937
https://gitlab.freedesktop.org/lumag/msm/-/commit/b43c524134e0
[2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917
https://gitlab.freedesktop.org/lumag/msm/-/commit/5be98120115c
[3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953
https://gitlab.freedesktop.org/lumag/msm/-/commit/5232a29ebc74
[4/5] drm/msm/dpu: drop TE2 definitions
https://gitlab.freedesktop.org/lumag/msm/-/commit/e1fbb0d78e86
[5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630
https://gitlab.freedesktop.org/lumag/msm/-/commit/075667e986f3
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2025-05-19 10:58 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-03-01 9:24 [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
2025-03-01 9:24 ` [PATCH v2 1/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8937 Dmitry Baryshkov
2025-04-29 0:37 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 2/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8917 Dmitry Baryshkov
2025-04-29 1:00 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 3/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on MSM8953 Dmitry Baryshkov
2025-04-29 1:21 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 4/5] drm/msm/dpu: drop TE2 definitions Dmitry Baryshkov
2025-04-29 1:33 ` Abhinav Kumar
2025-04-29 12:16 ` Dmitry Baryshkov
2025-04-29 18:27 ` Abhinav Kumar
2025-03-01 9:24 ` [PATCH v2 5/5] drm/msm/dpu: remove DSC feature bit for PINGPONG on SDM630 Dmitry Baryshkov
2025-04-29 2:01 ` Abhinav Kumar
2025-05-04 16:13 ` [PATCH v2 0/5] drm/msm/dpu: disable DSC on some of old DPU models Dmitry Baryshkov
2025-05-19 10:58 ` Dmitry Baryshkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).