Re: [PATCH v2 0/7] Qualcomm DRM DPU fixes

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Hi Angelo,

On 12/01/2021 22:26, AngeloGioacchino Del Regno wrote:
> This patch series brings some fixes to the Qualcomm DPU driver, aim is
> to get it prepared for "legacy" SoCs (like MSM8998, SDM630/660) and to
> finally get command-mode displays working on this driver.
> 
> The series was tested against MSM8998 (the commit that introduces it to
> the hw-catalog is not included in this series, as it needs to be cleaned
> up a little more) and specifically on:

Any updates on submitting hw catalog patches? If they are not yet fully 
ready, could you please send an RFC or DRAFT patch for the reference?

> - Sony Xperia XZ Premium (MSM8998), 4K dual-dsi LCD display, command-mode
> - F(x)Tec Pro1 (MSM8998), single-dsi OLED display, video-mode
> 
> ... And it obviously worked just perfect!
> 
> Changes in v2:
> - Dropped patches "drm/msm/dpu: Add a function to retrieve the current CTL status"
>    and "drm/msm/dpu: Fix timeout issues on command mode panels" as the
>    second patch was wrong.
> - Fixed patch apply issues on latest linux-next and 5.11-rcX
> 
> AngeloGioacchino Del Regno (7):
>    drm/msm/dpu: Fix VBIF_XINL_QOS_LVL_REMAP_000 register offset
>    drm/msm/dpu: Move DPU_SSPP_QOS_8LVL bit to SDM845 and SC7180 masks
>    drm/msm/dpu: Add prog_fetch_lines_worst_case to INTF_BLK macro
>    drm/msm/dpu: Allow specifying features and sblk in DSPP_BLK macro
>    drm/msm/dpu: Disable autorefresh in command mode
>    drm/msm/dpu: Correctly configure vsync tearcheck for command mode
>    drm/msm/dpu: Remove unused call in wait_for_commit_done
> 
>   .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  | 90 +++++++++++++++----
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 49 +++++-----
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 26 ++++++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 +++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c   |  9 +-
>   5 files changed, 147 insertions(+), 41 deletions(-)
> 


-- 
With best wishes
Dmitry