[PATCH 6.12.y 0/2] Backport support for Telit FN920C04 and FN990B40 modems

[PATCH 6.12.y 0/2] Backport support for Telit FN920C04 and FN990B40 modems

[Fabio Porcedda]

Hi,
these two patches are backports for 6.12.y of the following commits:

commit d2b91b3097c693f784393a28801a3885778615df
  bus: mhi: host: pci_generic: Add Telit FN920C04 modem support

commit 00559ba3ae740e7544b48fb509b2b97f56615892
  bus: mhi: host: pci_generic: Add Telit FN990B40 modem support

The cherry-pick of the original commits don't apply so I made this
patches after fixing the conflict.

Regards

Daniele Palmas (2):
  bus: mhi: host: pci_generic: Add Telit FN920C04 modem support
  bus: mhi: host: pci_generic: Add Telit FN990B40 modem support

 drivers/bus/mhi/host/pci_generic.c | 52 ++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

-- 
2.52.0

[PATCH 6.12 1/2] bus: mhi: host: pci_generic: Add Telit FN920C04 modem support

[Fabio Porcedda]

From: Daniele Palmas <dnlplm@gmail.com>

commit 6348f62ef7ecc5855b710a7d4ea682425c38bb80 upstream.

Add SDX35 based modem Telit FN920C04.

$ lspci -vv
01:00.0 Unassigned class [ff00]: Qualcomm Device 011a
        Subsystem: Device 1c5d:2020

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250401093458.2953872-1-dnlplm@gmail.com
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
 drivers/bus/mhi/host/pci_generic.c | 39 ++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 6505ce6ab1a2..b8520ca40e8c 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -698,6 +698,42 @@ static const struct mhi_pci_dev_info mhi_telit_fe990a_info = {
 	.mru_default = 32768,
 };
 
+static const struct mhi_channel_config mhi_telit_fn920c04_channels[] = {
+	MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 1),
+	MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 1),
+	MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
+	MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1),
+	MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1),
+	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
+	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
+};
+
+static const struct mhi_controller_config modem_telit_fn920c04_config = {
+	.max_channels = 128,
+	.timeout_ms = 50000,
+	.num_channels = ARRAY_SIZE(mhi_telit_fn920c04_channels),
+	.ch_cfg = mhi_telit_fn920c04_channels,
+	.num_events = ARRAY_SIZE(mhi_telit_fn990_events),
+	.event_cfg = mhi_telit_fn990_events,
+};
+
+static const struct mhi_pci_dev_info mhi_telit_fn920c04_info = {
+	.name = "telit-fn920c04",
+	.config = &modem_telit_fn920c04_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.sideband_wake = false,
+	.mru_default = 32768,
+	.edl_trigger = true,
+};
+
 static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = {
 	.name = "netprisma-lcur57",
 	.edl = "qcom/prog_firehose_sdx24.mbn",
@@ -720,6 +756,9 @@ static const struct mhi_pci_dev_info mhi_netprisma_fcun69_info = {
 
 /* Keep the list sorted based on the PID. New VID should be added as the last entry */
 static const struct pci_device_id mhi_pci_id_table[] = {
+	/* Telit FN920C04 (sdx35) */
+	{PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x011a, 0x1c5d, 0x2020),
+		.driver_data = (kernel_ulong_t) &mhi_telit_fn920c04_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
-- 
2.52.0

[PATCH 6.12 2/2] bus: mhi: host: pci_generic: Add Telit FN990B40 modem support

[Fabio Porcedda]

From: Daniele Palmas <dnlplm@gmail.com>

commit 00559ba3ae740e7544b48fb509b2b97f56615892 upstream.

Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration.

01:00.0 Unassigned class [ff00]: Qualcomm Device 0309
        Subsystem: Device 1c5d:201a

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
[mani: added sdx72 in the comment to identify the chipset]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
 drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index b8520ca40e8c..abf070760d68 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -734,6 +734,16 @@ static const struct mhi_pci_dev_info mhi_telit_fn920c04_info = {
 	.edl_trigger = true,
 };
 
+static const struct mhi_pci_dev_info mhi_telit_fn990b40_info = {
+	.name = "telit-fn990b40",
+	.config = &modem_telit_fn920c04_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.sideband_wake = false,
+	.mru_default = 32768,
+	.edl_trigger = true,
+};
+
 static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = {
 	.name = "netprisma-lcur57",
 	.edl = "qcom/prog_firehose_sdx24.mbn",
@@ -779,6 +789,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
 		.driver_data = (kernel_ulong_t) &mhi_telit_fe990a_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
+	/* Telit FN990B40 (sdx72) */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0309, 0x1c5d, 0x201a),
+		.driver_data = (kernel_ulong_t) &mhi_telit_fn990b40_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx75_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
-- 
2.52.0