From: Manu Gautam <mgautam@codeaurora.org>
To: Felipe Balbi <balbi@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [RESEND PATCH 1/3] usb: dwc3: Don't reinitialize core during host bus-suspend/resume
Date: Sat, 21 Oct 2017 19:17:56 +0530 [thread overview]
Message-ID: <d116762a-2a3f-6b32-06a1-66a98ed9aa62@codeaurora.org> (raw)
In-Reply-To: <1506511163-26026-1-git-send-email-mgautam@codeaurora.org>
Hi Felipe,
Let me know if patches in this series look fine to you.
On 9/27/2017 4:49 PM, Manu Gautam wrote:
> Driver powers-off PHYs and reinitializes DWC3 core and gadget on
> resume. While this works fine for gadget mode but in host
> mode there is not re-initialization of host stack. Also, resetting
> bus as part of bus_suspend/resume is not correct which could affect
> (or disconnect) connected devices.
> Fix this by not reinitializing core on suspend/resume in host mode
> for HOST only and OTG/drd configurations.
>
> Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
> ---
> drivers/usb/dwc3/core.c | 43 ++++++++++++++++++++-----------------------
> 1 file changed, 20 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 03474d3..f75613f 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -927,6 +927,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> + dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>
> if (dwc->usb2_phy)
> @@ -942,6 +943,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> }
> break;
> case USB_DR_MODE_HOST:
> + dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
>
> if (dwc->usb2_phy)
> @@ -1293,21 +1295,19 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
> {
> unsigned long flags;
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + switch (dwc->current_dr_role) {
> + case DWC3_GCTL_PRTCAP_DEVICE:
> spin_lock_irqsave(&dwc->lock, flags);
> dwc3_gadget_suspend(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
> + dwc3_core_exit(dwc);
> break;
> - case USB_DR_MODE_HOST:
> + case DWC3_GCTL_PRTCAP_HOST:
> default:
> /* do nothing */
> break;
> }
>
> - dwc3_core_exit(dwc);
> -
> return 0;
> }
>
> @@ -1316,18 +1316,17 @@ static int dwc3_resume_common(struct dwc3 *dwc)
> unsigned long flags;
> int ret;
>
> - ret = dwc3_core_init(dwc);
> - if (ret)
> - return ret;
> + switch (dwc->current_dr_role) {
> + case DWC3_GCTL_PRTCAP_DEVICE:
> + ret = dwc3_core_init(dwc);
> + if (ret)
> + return ret;
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> spin_lock_irqsave(&dwc->lock, flags);
> dwc3_gadget_resume(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
> - /* FALLTHROUGH */
> - case USB_DR_MODE_HOST:
> + break;
> + case DWC3_GCTL_PRTCAP_HOST:
> default:
> /* do nothing */
> break;
> @@ -1338,7 +1337,7 @@ static int dwc3_resume_common(struct dwc3 *dwc)
>
> static int dwc3_runtime_checks(struct dwc3 *dwc)
> {
> - switch (dwc->dr_mode) {
> + switch (dwc->current_dr_role) {
> case USB_DR_MODE_PERIPHERAL:
> case USB_DR_MODE_OTG:
> if (dwc->connected)
> @@ -1381,12 +1380,11 @@ static int dwc3_runtime_resume(struct device *dev)
> if (ret)
> return ret;
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + switch (dwc->current_dr_role) {
> + case DWC3_GCTL_PRTCAP_DEVICE:
> dwc3_gadget_process_pending_events(dwc);
> break;
> - case USB_DR_MODE_HOST:
> + case DWC3_GCTL_PRTCAP_HOST:
> default:
> /* do nothing */
> break;
> @@ -1402,13 +1400,12 @@ static int dwc3_runtime_idle(struct device *dev)
> {
> struct dwc3 *dwc = dev_get_drvdata(dev);
>
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> + switch (dwc->current_dr_role) {
> + case DWC3_GCTL_PRTCAP_DEVICE:
> if (dwc3_runtime_checks(dwc))
> return -EBUSY;
> break;
> - case USB_DR_MODE_HOST:
> + case DWC3_GCTL_PRTCAP_HOST:
> default:
> /* do nothing */
> break;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-10-21 13:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 11:19 [RESEND PATCH 1/3] usb: dwc3: Don't reinitialize core during host bus-suspend/resume Manu Gautam
2017-09-27 11:19 ` [RESEND PATCH 2/3] usb: dwc3: pci: Runtime resume child device from wq Manu Gautam
2017-09-27 11:19 ` [RESEND PATCH 3/3] usb: dwc3: core: Notify current USB mode to USB3 PHY as well Manu Gautam
2017-10-21 13:47 ` Manu Gautam [this message]
2017-10-24 9:35 ` [RESEND PATCH 1/3] usb: dwc3: Don't reinitialize core during host bus-suspend/resume Felipe Balbi
2018-01-10 12:48 ` Roger Quadros
2018-01-10 12:57 ` Felipe Balbi
[not found] ` <876089zxau.fsf-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2018-01-10 12:59 ` Roger Quadros
2018-01-11 1:41 ` Manu Gautam
2018-01-11 8:14 ` Felipe Balbi
2018-01-11 8:55 ` Manu Gautam
2018-01-11 9:04 ` Felipe Balbi
2018-01-11 9:15 ` Roger Quadros
2018-01-11 9:23 ` Felipe Balbi
2018-01-15 15:40 ` Roger Quadros
2018-01-16 6:36 ` Manu Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d116762a-2a3f-6b32-06a1-66a98ed9aa62@codeaurora.org \
--to=mgautam@codeaurora.org \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).