From mboxrd@z Thu Jan  1 00:00:00 1970
From: Taniya Das <tdas@codeaurora.org>
Subject: Re: [PATCH v3 4/4] clk: qcom: Add graphics clock controller driver
 for SDM845
Date: Mon, 19 Nov 2018 17:02:47 +0530
Message-ID: <d3fef1bb-f18b-cf01-bb21-678cec65eb1b@codeaurora.org>
References: <1534141987-29601-1-git-send-email-anischal@codeaurora.org>
 <1534141987-29601-5-git-send-email-anischal@codeaurora.org>
 <154139982787.88331.4428778114927340653@swboyd.mtv.corp.google.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <154139982787.88331.4428778114927340653@swboyd.mtv.corp.google.com>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: Stephen Boyd <sboyd@kernel.org>, Amit Nischal <anischal@codeaurora.org>, Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Rajendra Nayak <rnayak@codeaurora.org>, Odelu Kukatla <okukatla@codeaurora.org>, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: linux-arm-msm@vger.kernel.org

Hello Stephen,

On 11/5/2018 12:07 PM, Stephen Boyd wrote:
> Quoting Amit Nischal (2018-08-12 23:33:07)
>> +
>> +static int gpu_cc_sdm845_probe(struct platform_device *pdev)
>> +{
>> +       struct regmap *regmap;
>> +       unsigned int value, mask;
>> +       int ret;
>> +
>> +       regmap = qcom_cc_map(pdev, &gpu_cc_sdm845_desc);
>> +       if (IS_ERR(regmap))
>> +               return PTR_ERR(regmap);
>> +
>> +       clk_fabia_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
>> +       clk_fabia_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
>> +
>> +       /*
>> +        * Configure gpu_cc_cx_gmu_clk with recommended
>> +        * wakeup/sleep settings
>> +        */
>> +       mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
>> +       mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
>> +       value = 0xf << CX_GMU_CBCR_WAKE_SHIFT | 0xf << CX_GMU_CBCR_SLEEP_SHIFT;
>> +       regmap_update_bits(regmap, 0x1098, mask, value);
>> +
>> +       ret = qcom_cc_really_probe(pdev, &gpu_cc_sdm845_desc, regmap);
>> +       if (ret)
>> +               return ret;
>> +
>> +       /* Configure clk_dis_wait for gpu_cx_gdsc */
>> +       regmap_update_bits(regmap, 0x106c, CLK_DIS_WAIT_MASK,
>> +                                               8 << CLK_DIS_WAIT_SHIFT);
> 
> Is there a reason this is done after clks are registered? I'd think we
> would want to do it before.
> 

Yes, it could be done before, would move it.

>> +
>> +       /* Set supported range of frequencies for gfx3d clock */
>> +       clk_hw_set_rate_range(&gpu_cc_gx_gfx3d_clk_src.clkr.hw, 180000000,
>> +                                                               710000000);
>> +
>> +       return 0;
>> +}

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--