Re: [PATCH 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy

[Nitheesh Sekar <quic_nsekar@quicinc.com>]

On 10/4/2023 12:27 PM, Krzysztof Kozlowski wrote:
> On 03/10/2023 14:08, Nitheesh Sekar wrote:
>> Document the Qualcomm UNIPHY PCIe 28LP present in IPQ5018.
>>
>> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Thank you for your patch. There is something to discuss/improve.
Sure. Will learn and improve.
>
>
>> ---
>>   .../bindings/phy/qcom,uniphy-pcie-28lp.yaml   | 77 +++++++++++++++++++
>>   1 file changed, 77 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
>> new file mode 100644
>> index 000000000000..6b2574f9532e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
> Filename should match compatibles and they do not use 28lp.
Sure. will remove the 28lp. added it based on the file name.
Is "qcom,uniphy-pcie.yaml" good ? Because this will be used for other 
SoCs as well which will have different compatibles. So i did not include 
the SoC name, lane and speed info which i have used int he compatible 
names.
>
>> @@ -0,0 +1,77 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/qcom,uniphy-pcie-28lp.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm UNIPHY PCIe 28LP PHY driver
> Driver as Linux driver? Drop. Describe the hardware instead.
>
>> +
>> +maintainers:
>> +  - Nitheesh Sekar <quic_nsekar@quicinc.com>
>> +  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,ipq5018-uniphy-pcie-gen2x1
>> +      - qcom,ipq5018-uniphy-pcie-gen2x2
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    items:
>> +      - const: pipe_clk
> Drop _clk... or even drop entire clock-names. Not needed for one entry.
Sure. Will drop "_clk" part.
>
>> +
>> +  resets:
>> +    maxItems: 2
>> +
>> +  reset-names:
>> +    items:
>> +      - const: phy
>> +      - const: phy_phy
> These are absolutely terrible names. If you have third one, it would be
> "phy_phy_phy"? Drop or provide something useful.
Sure. Will update.

Thanks,
Nitheesh