Re: [PATCH v5 2/4] power: supply: Add support for the Qualcomm Battery Monitoring System

[Randy Dunlap <rdunlap@infradead.org>]

On 06/07/2018 11:12 AM, Craig Tatlor wrote:
> This patch adds a driver for the BMS (Battery Monitoring System)
> block of the PM8941 PMIC, it uses a lookup table defined in the
> device tree to generate a capacity from the BMS supplied OCV, it
> then ammends the coulomb counter to that to increase the accuracy

       amends

> of the estimated capacity.
> 
> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> ---

> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 428b426842f4..6c354c37bc55 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -82,6 +82,15 @@ config BATTERY_ACT8945A
>  	  Say Y here to enable support for power supply provided by
>  	  Active-semi ActivePath ACT8945A charger.
>  
> +config BATTERY_BMS
> +	tristate "Qualcomm Battery Monitoring System driver"
> +	depends on MFD_SPMI_PMIC || COMPILE_TEST
> +	depends on OF
> +	depends on REGMAP_SPMI

	select REGMAP_SPMI

I'm not a fan of "select", but it does not have a prompt string so it isn't
user settable (not directly; it can be set indirectly).
And all other uses of it in Kconfig files use "select".

> +	help
> +	  Say Y to include support for the Battery Monitoring hardware
> +	  found in some Qualcomm PM series PMICs.
> +
>  config BATTERY_CPCAP
>  	tristate "Motorola CPCAP PMIC battery driver"
>  	depends on MFD_CPCAP && IIO


-- 
~Randy