Re: [PATCH V6 3/7] dt-bindings: pinctrl: qcom: Add support for IPQ9574

[Kathiravan T <quic_kathirav@quicinc.com>]

On 2/2/2023 8:36 PM, Devi Priya wrote:
> Add new binding document for pinctrl on IPQ9574
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
>   .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 137 ++++++++++++++++++
>   1 file changed, 137 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> new file mode 100644
> index 000000000000..053b15ccb7a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> +
> +description:
> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
> +
> +properties:
> +  compatible:
> +    const: qcom,ipq9574-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +  gpio-reserved-ranges:
> +    minItems: 1
> +    maxItems: 33
> +
> +  gpio-line-names:
> +    maxItems: 65
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-ipq9574-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
> +            - enum: [ qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_cmd,
> +                      qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3, sdc1_clk,
> +                      sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 8
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
> +                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
> +                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
> +                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
> +                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
> +                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
> +                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
> +                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk,
> +                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
> +                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21,
> +                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13,
> +                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32,


Given that, In driver everything is grouped under a single name 'pwm', 
are these pwm function names as still valid?


> +                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
> +                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
> +                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
> +                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
> +                qdss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
> +                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
> +                wci20, wci21, wsa_swrm ]
> +
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      bias-disable: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    tlmm: pinctrl@1000000 {
> +        compatible = "qcom,ipq9574-tlmm";
> +        reg = <0x01000000 0x300000>;
> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 65>;
> +
> +        uart2-state {
> +            pins = "gpio34", "gpio35";
> +            function = "blsp2_uart";
> +            drive-strength = <8>;
> +            bias-pull-down;
> +        };
> +    };