Re: [PATCH v2 5/5] arm64: boot: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 30/09/2023 17:41, Konrad Dybcio wrote:
> 
> 
> On 9/30/23 15:41, Bryan O'Donoghue wrote:
>> Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks
>> similar to most of the sdmX, smX and now scX controllers.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++
>>   1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index cad59af7ccef..ca43d038578b 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -8,6 +8,7 @@
>>   #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
>>   #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
>>   #include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
>>   #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
>>   #include <dt-bindings/interconnect/qcom,osm-l3.h>
>>   #include <dt-bindings/interconnect/qcom,sc8280xp.h>
>> @@ -3450,6 +3451,21 @@ usb_1_role_switch: endpoint {
>>               };
>>           };
>> +        camcc: clock-controller@ad00000 {
>> +            compatible = "qcom,sc8280xp-camcc";
>> +            reg = <0 0x0ad00000 0 0x20000>;
>> +            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
>> +                 <&rpmhcc RPMH_CXO_CLK>,
>> +                 <&rpmhcc RPMH_CXO_CLK_A>,
>> +                 <&sleep_clk>;
>> +            clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
> clock-names is now redundant :)
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> 
> Konrad

BTW.

Looking at the block diagram for the Camera, I see why Cam_CC_AHB is 
included in this list. Its not called out as a dependency in the clock 
tree but when you look at the block diagram you can see it gates the AHB 
bus to the CAM_CC block.

anyway

---
bod