Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Nitin Rawat <quic_nitirawa@quicinc.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: <agross@kernel.org>, <andersson@kernel.org>,
	<konrad.dybcio@linaro.org>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <quic_cang@quicinc.com>,
	<quic_nguyenb@quicinc.com>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	"Naveen Kumar Goud Arepalli" <quic_narepall@quicinc.com>
Subject: Re: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
Date: Thu, 31 Aug 2023 14:48:25 +0530	[thread overview]
Message-ID: <f539613f-e050-a9ec-ae9b-e6b6db5a9a32@quicinc.com> (raw)
In-Reply-To: <20230828081719.GG5148@thinkpad>



On 8/28/2023 1:47 PM, Manivannan Sadhasivam wrote:
> On Wed, Aug 23, 2023 at 09:14:12PM +0530, Nitin Rawat wrote:
>> This change configures SYS1CLK_1US_REG for pre scale up condition. Also
>> move ufs_qcom_cfg_timers from clk scaling post change ops to clk scaling
>> pre change ops to align with the hardware specification.
>>
> 
> Same comment as previous patch. This looks like a bug fix to me.
> 
> Also, this patch should be splitted into 2. SYS1CLK_1US_REG and
> ufs_qcom_cfg_timers change.
> 
> - Mani
> 


In this patch we are trying to refactor ufs_qcom_cfg_timers function and 
added extra argument to this function. Since it is just refactoring 
code, IMO it's better to not split in to 2 patches. We will update the 
commit message to explain more in detail

--Nitin

>> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
>> ---
>>   drivers/ufs/host/ufs-qcom.c | 61 +++++++++++++++++++++++++------------
>>   1 file changed, 42 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index 491c0173603e..82cf3ac4193a 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -533,7 +533,8 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>>    * Return: zero for success and non-zero in case of a failure.
>>    */
>>   static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>> -			       u32 hs, u32 rate, bool update_link_startup_timer)
>> +				 u32 hs, u32 rate, bool link_startup,
>> +				 bool is_pre_scale_up)
>>   {
>>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>>   	struct ufs_clk_info *clki;
>> @@ -564,11 +565,16 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>>   	/*
>>   	 * The Qunipro controller does not use following registers:
>>   	 * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
>> -	 * UFS_REG_PA_LINK_STARTUP_TIMER
>> -	 * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
>> -	 * Aggregation logic.
>> -	*/
>> -	if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
>> +	 * UFS_REG_PA_LINK_STARTUP_TIMER.
>> +	 * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
>> +	 * Aggregation logic and Auto hibern8 logic.
>> +	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
>> +	 * controller V4.0.0 onwards.
>> +	 */
>> +	if (ufs_qcom_cap_qunipro(host) &&
>> +	    !(ufshcd_is_intr_aggr_allowed(hba) ||
>> +	    ufshcd_is_auto_hibern8_supported(hba) ||
>> +	    host->hw_ver.major >= 4))
>>   		return 0;
>>
>>   	if (gear == 0) {
>> @@ -577,8 +583,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>>   	}
>>
>>   	list_for_each_entry(clki, &hba->clk_list_head, list) {
>> -		if (!strcmp(clki->name, "core_clk"))
>> -			core_clk_rate = clk_get_rate(clki->clk);
>> +		if (!strcmp(clki->name, "core_clk")) {
>> +			if (is_pre_scale_up)
>> +				core_clk_rate = clki->max_freq;
>> +			else
>> +				core_clk_rate = clk_get_rate(clki->clk);
>> +			break;
>> +		}
>> +
>>   	}
>>
>>   	/* If frequency is smaller than 1MHz, set to 1MHz */
>> @@ -658,7 +670,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>>   		mb();
>>   	}
>>
>> -	if (update_link_startup_timer && host->hw_ver.major != 0x5) {
>> +	if (link_startup && host->hw_ver.major != 0x5) {
>>   		ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
>>   			      REG_UFS_CFG0);
>>   		/*
>> @@ -719,7 +731,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
>>   	switch (status) {
>>   	case PRE_CHANGE:
>>   		if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
>> -					0, true)) {
>> +					0, true, false)) {
>>   			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
>>   				__func__);
>>   			return -EINVAL;
>> @@ -968,7 +980,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
>>   	case POST_CHANGE:
>>   		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
>>   					dev_req_params->pwr_rx,
>> -					dev_req_params->hs_rate, false)) {
>> +					dev_req_params->hs_rate, false, false)) {
>>   			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
>>   				__func__);
>>   			/*
>> @@ -1401,11 +1413,24 @@ static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
>>   static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
>>   {
>>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> +	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
>> +	int err;
>>
>>   	if (!ufs_qcom_cap_qunipro(host))
>> -		return 0;
>> +		goto out;
>> +
>> +	if (attr) {
>> +		err = ufs_qcom_cfg_timers(hba, attr->gear_rx,
>> +					    attr->pwr_rx, attr->hs_rate,
>> +					    false, true);
>> +		if (err)
>> +			dev_err(hba->dev, "%s ufs cfg timer failed\n",
>> +								__func__);
>> +	}
>>
>> -	return ufs_qcom_cfg_core_clk_ctrl(hba);
>> +	err = ufs_qcom_cfg_core_clk_ctrl(hba);
>> +out:
>> +	return err;
>>   }
>>
>>   static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
>> @@ -1441,6 +1466,7 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
>>   static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
>>   {
>>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> +	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
>>   	struct list_head *head = &hba->clk_list_head;
>>   	struct ufs_clk_info *clki;
>>   	u32 curr_freq = 0;
>> @@ -1449,6 +1475,9 @@ static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
>>   	if (!ufs_qcom_cap_qunipro(host))
>>   		return 0;
>>
>> +	if (attr)
>> +		ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
>> +					 attr->hs_rate, false, false);
>>
>>   	list_for_each_entry(clki, head, list) {
>>   		if (!IS_ERR_OR_NULL(clki->clk) &&
>> @@ -1480,7 +1509,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
>>   		bool scale_up, enum ufs_notify_change_status status)
>>   {
>>   	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> -	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
>>   	int err = 0;
>>
>>   	/* check the host controller state before sending hibern8 cmd */
>> @@ -1510,11 +1538,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
>>   			return err;
>>   		}
>>
>> -		ufs_qcom_cfg_timers(hba,
>> -				    dev_req_params->gear_rx,
>> -				    dev_req_params->pwr_rx,
>> -				    dev_req_params->hs_rate,
>> -				    false);
>>   		ufs_qcom_icc_update_bw(host);
>>   		ufshcd_uic_hibern8_exit(hba);
>>   	}
>> --
>> 2.17.1
>>
> 

  reply	other threads:[~2023-08-31  9:18 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-23 15:44 [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles Nitin Rawat
2023-08-28  7:38   ` Manivannan Sadhasivam
2023-08-30 17:37     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk Nitin Rawat
2023-08-28  7:40   ` Manivannan Sadhasivam
2023-08-30 17:37     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes Nitin Rawat
2023-08-28  8:05   ` Manivannan Sadhasivam
2023-08-28  8:13     ` Manivannan Sadhasivam
2023-08-23 15:44 ` [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification Nitin Rawat
2023-08-28  8:08   ` Manivannan Sadhasivam
2023-08-31  9:11     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function Nitin Rawat
2023-08-28  8:17   ` Manivannan Sadhasivam
2023-08-31  9:18     ` Nitin Rawat [this message]
2023-08-23 15:44 ` [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions Nitin Rawat
2023-08-28  8:18   ` Manivannan Sadhasivam
2023-08-25 21:44 ` [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Martin K. Petersen
2023-08-28 12:59   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f539613f-e050-a9ec-ae9b-e6b6db5a9a32@quicinc.com \
    --to=quic_nitirawa@quicinc.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_narepall@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox