Re: [PATCH 1/6] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 15/05/2022 22:31, Robert Marko wrote:
> Convert the bindings of Qualcomm SPMI regulators to DT schema.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
> I am aware that syscon alone is not really acceptable, its converted
> directly from the old text bindings.
> 
> There is also the issue of some MSM8994, MSM8996 and APQ8096 devices using
> '#address-cells', '#size-cells', some even defining reg property for
> regulators.
> 
> Any advice on how to solve these issues is appreciated.
> ---
>  .../regulator/qcom,spmi-regulator.yaml        | 176 ++++++++++++++++++

You miss here the actual conversion... where is the removal of old file?

>  1 file changed, 176 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> new file mode 100644
> index 000000000000..f7da310f1845
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
> @@ -0,0 +1,176 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Regulators
> +
> +maintainers:
> +  - Robert Marko <robert.marko@sartura.hr>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm660-regulators
> +      - qcom,pm660l-regulators
> +      - qcom,pm8004-regulators
> +      - qcom,pm8005-regulators
> +      - qcom,pm8226-regulators
> +      - qcom,pm8841-regulators
> +      - qcom,pm8916-regulators
> +      - qcom,pm8941-regulators
> +      - qcom,pm8950-regulators
> +      - qcom,pm8994-regulators
> +      - qcom,pmi8994-regulators
> +      - qcom,pms405-regulators
> +
> +  qcom,saw-reg:
> +    description: Reference to syscon node defining the SAW registers
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pm8941-regulators
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: Over-current protection interrupt for 5V S1
> +            - description: Over-current protection interrupt for 5V S2
> +        interrupt-names:
> +          items:
> +            - const: ocp-5vs1
> +            - const: ocp-5vs2
> +
> +patternProperties:

This goes just after "properties:"

> +  ".*-supply$":
> +    description: Input supply phandle(s) for this node
> +    $ref: "/schemas/types.yaml#/definitions/phandle"
> +

Best regards,
Krzysztof