From: Vijay Khemka <vijaykhemka@fb.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [Potential Spoof] Re: [PATCH v2] misc: aspeed-lpc-ctrl: make parameter optional
Date: Wed, 6 Mar 2019 00:15:00 +0000 [thread overview]
Message-ID: <017F4BEC-70EE-42A7-BCC3-85B6DAEE5EEE@fb.com> (raw)
Joel,
Did this patch apply upstream. Somehow I can't find this patch in linux or linux-next or our obmc dev4.19.
Regards
-Vijay
?On 1/17/19, 10:53 AM, "Linux-aspeed on behalf of Vijay Khemka" <linux-aspeed-bounces+vijaykhemka=fb.com at lists.ozlabs.org on behalf of vijaykhemka@fb.com> wrote:
On 1/16/19, 10:17 PM, "Joel Stanley" <joel@jms.id.au> wrote:
On Thu, 17 Jan 2019 at 09:02, Vijay Khemka <vijaykhemka@fb.com> wrote:
>
> Makiing memory-region and flash as optional parameter in device
> tree if user needs to use these parameter through ioctl then
> need to define in devicetree.
>
> Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Thanks! This looks okay to me. I tested it on one of our systems which
uses both flash and reserved memory and it was fine.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Can you also send a patch to update the bindings at
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt ? I think the
only change you need to make is to move the memory region and flash
properties to optional (instead of required).
Sure I will do this.
Cheers,
Joel
> ---
> drivers/misc/aspeed-lpc-ctrl.c | 58 +++++++++++++++++++++-------------
> 1 file changed, 36 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c
> index a024f8042259..332210e06e98 100644
> --- a/drivers/misc/aspeed-lpc-ctrl.c
> +++ b/drivers/misc/aspeed-lpc-ctrl.c
> @@ -68,6 +68,7 @@ static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
> unsigned long param)
> {
> struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
> + struct device *dev = file->private_data;
> void __user *p = (void __user *)param;
> struct aspeed_lpc_ctrl_mapping map;
> u32 addr;
> @@ -90,6 +91,12 @@ static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
> if (map.window_id != 0)
> return -EINVAL;
>
> + /* If memory-region is not described in device tree */
> + if (!lpc_ctrl->mem_size) {
> + dev_err(dev, "Didn't find reserved memory\n");
> + return -EINVAL;
> + }
> +
> map.size = lpc_ctrl->mem_size;
>
> return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
> @@ -126,9 +133,18 @@ static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
> return -EINVAL;
>
> if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
> + if (!lpc_ctrl->pnor_size) {
> + dev_err(dev, "Didn't find host pnor flash\n");
> + return -EINVAL;
> + }
> addr = lpc_ctrl->pnor_base;
> size = lpc_ctrl->pnor_size;
> } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
> + /* If memory-region is not described in device tree */
> + if (!lpc_ctrl->mem_size) {
> + dev_err(dev, "Didn't find reserved memory\n");
> + return -EINVAL;
> + }
> addr = lpc_ctrl->mem_base;
> size = lpc_ctrl->mem_size;
> } else {
> @@ -196,17 +212,17 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
> if (!lpc_ctrl)
> return -ENOMEM;
>
> + /* If flash is described in device tree then store */
> node = of_parse_phandle(dev->of_node, "flash", 0);
> if (!node) {
> - dev_err(dev, "Didn't find host pnor flash node\n");
> - return -ENODEV;
> - }
> -
> - rc = of_address_to_resource(node, 1, &resm);
> - of_node_put(node);
> - if (rc) {
> - dev_err(dev, "Couldn't address to resource for flash\n");
> - return rc;
> + dev_dbg(dev, "Didn't find host pnor flash node\n");
> + } else {
> + rc = of_address_to_resource(node, 1, &resm);
> + of_node_put(node);
> + if (rc) {
> + dev_err(dev, "Couldn't address to resource for flash\n");
> + return rc;
> + }
> }
>
> lpc_ctrl->pnor_size = resource_size(&resm);
> @@ -214,22 +230,22 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
>
> dev_set_drvdata(&pdev->dev, lpc_ctrl);
>
> + /* If memory-region is described in device tree then store */
> node = of_parse_phandle(dev->of_node, "memory-region", 0);
> if (!node) {
> - dev_err(dev, "Didn't find reserved memory\n");
> - return -EINVAL;
> - }
> + dev_dbg(dev, "Didn't find reserved memory\n");
> + } else {
> + rc = of_address_to_resource(node, 0, &resm);
> + of_node_put(node);
> + if (rc) {
> + dev_err(dev, "Couldn't address to resource for reserved memory\n");
> + return -ENOMEM;
> + }
>
> - rc = of_address_to_resource(node, 0, &resm);
> - of_node_put(node);
> - if (rc) {
> - dev_err(dev, "Couldn't address to resource for reserved memory\n");
> - return -ENOMEM;
> + lpc_ctrl->mem_size = resource_size(&resm);
> + lpc_ctrl->mem_base = resm.start;
> }
>
> - lpc_ctrl->mem_size = resource_size(&resm);
> - lpc_ctrl->mem_base = resm.start;
> -
> lpc_ctrl->regmap = syscon_node_to_regmap(
> pdev->dev.parent->of_node);
> if (IS_ERR(lpc_ctrl->regmap)) {
> @@ -258,8 +274,6 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
> goto err;
> }
>
> - dev_info(dev, "Loaded at %pr\n", &resm);
> -
> return 0;
>
> err:
> --
> 2.17.1
>
reply other threads:[~2019-03-06 0:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=017F4BEC-70EE-42A7-BCC3-85B6DAEE5EEE@fb.com \
--to=vijaykhemka@fb.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox