From mboxrd@z Thu Jan  1 00:00:00 1970
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Wed, 29 May 2024 09:26:52 +0200
Subject: [PATCH 1/4] dt-bindings: gpio: aspeed,sgpio: Order properties by
 DTS style
In-Reply-To: <20240529-dt-warnings-gpio-sgpio-interrupt-cells-v1-1-91c42976833b@codeconstruct.com.au>
References: <20240529-dt-warnings-gpio-sgpio-interrupt-cells-v1-0-91c42976833b@codeconstruct.com.au>
 <20240529-dt-warnings-gpio-sgpio-interrupt-cells-v1-1-91c42976833b@codeconstruct.com.au>
Message-ID: <080c4c05-e795-49d8-a547-d39d10ed8333@kernel.org>
List-Id: <linux-aspeed.lists.ozlabs.org>
To: linux-aspeed@lists.ozlabs.org
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

On 29/05/2024 07:13, Andrew Jeffery wrote:
> Tidy up the list of required properties and the example node by ordering
> the properties in terms of the DTS coding style.
> 
> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> ---
>  Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> index 46bb121360dc..6b15a3a3fb66 100644
> --- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> @@ -51,12 +51,12 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - gpio-controller
> -  - '#gpio-cells'
> +  - clocks
>    - interrupts
>    - interrupt-controller
> +  - gpio-controller
> +  - '#gpio-cells'
>    - ngpios
> -  - clocks
>    - bus-frequency

No, this should have the same order as properties are listed.

Don't change it.

>  
>  additionalProperties: false
> @@ -65,13 +65,13 @@ examples:
>    - |
>      #include <dt-bindings/clock/aspeed-clock.h>
>      sgpio: sgpio at 1e780200 {
> -        #gpio-cells = <2>;
>          compatible = "aspeed,ast2500-sgpio";
> -        gpio-controller;
> -        interrupts = <40>;
>          reg = <0x1e780200 0x0100>;
>          clocks = <&syscon ASPEED_CLK_APB>;
> +        interrupts = <40>;
>          interrupt-controller;
> +        gpio-controller;
> +        #gpio-cells = <2>;

That's just example. I don't find this change useful but churn.

Best regards,
Krzysztof