[PATCH 1/2] ARM: dts: Add Aspeed SoC USB controllers to device-tree

[Andrew Jeffery <andrew@aj.id.au>]

On Fri, 13 Apr 2018, at 14:10, Benjamin Herrenschmidt wrote:
> This adds the USB controllers to the DT template of the
> AST24xx and AST25xx SoCs.
> 
> This patch doesn't enable them by default on any board specific
> .dts yet. This will be done when we have the necessary clock/reset
> and pinmux support. In the meantime though, this will work if
> u-boot configures things properly.
> 
> For the AST2400 I only added pinmux definition for port 1
> which is dual USB1/USB2. There are additional USB1 only ports
> that might require more work but I don't have HW to test at
> hand so I'm leaving that to whoever cares.
> 
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-g4.dtsi | 27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/aspeed-g5.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 67 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> index ae2b8c952e80..c318e481db78 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -108,6 +108,23 @@
>  			status = "disabled";
>  		};
>  
> +		ehci0: usb at 1e6a1000 {
> +			compatible = "aspeed,ast2400-ehci", "generic-ehci";
> +			reg = <0x1e6a1000 0x100>;
> +			interrupts = <5>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +			status = "disabled";
> +		};
> +
> +		uhci: usb at 1e6b0000 {
> +			compatible = "aspeed,ast2400-uhci", "generic-uhci";
> +			reg = <0x1e6b0000 0x100>;
> +			interrupts = <14>;
> +			#ports = <3>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> +			status = "disabled";
> +		};
> +
>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -1232,6 +1249,16 @@
>  		groups = "USBCKI";
>  	};
>  
> +	pinctrl_usb2h_default: usb2h_default {
> +		function = "USB2H1";
> +		groups = "USB2H1";
> +	};
> +
> +	pinctrl_usb2d_default: usb2d_default {
> +		function = "USB2D1";
> +		groups = "USB2D1";
> +	};
> +
>  	pinctrl_vgabios_rom_default: vgabios_rom_default {
>  		function = "VGABIOS_ROM";
>  		groups = "VGABIOS_ROM";
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 2477ebc11d9d..cebc19809174 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -143,6 +143,31 @@
>  			status = "disabled";
>  		};
>  
> +		ehci0: usb at 1e6a1000 {
> +			compatible = "aspeed,ast2500-ehci", "generic-ehci";
> +			reg = <0x1e6a1000 0x100>;
> +			interrupts = <5>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +			status = "disabled";
> +		};
> +
> +		ehci1: usb at 1e6a3000 {
> +			compatible = "aspeed,ast2500-ehci", "generic-ehci";
> +			reg = <0x1e6a3000 0x100>;
> +			interrupts = <13>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
> +			status = "disabled";
> +		};
> +
> +		uhci: usb at 1e6b0000 {
> +			compatible = "aspeed,ast2500-uhci", "generic-uhci";
> +			reg = <0x1e6b0000 0x100>;
> +			interrupts = <14>;
> +			#ports = <2>;
> +			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
> +			status = "disabled";
> +		};
> +
>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -1363,6 +1388,21 @@
>  		groups = "USBCKI";
>  	};
>  
> +	pinctrl_usb2ah_default: usb2ah_default {
> +		function = "USB2AH";
> +		groups = "USB2AH";
> +	};
> +
> +	pinctrl_usb11bhid_default: usb11bhid_default {
> +		function = "USB11BHID";
> +		groups = "USB11BHID";
> +	};
> +
> +	pinctrl_usb2bh_default: usb2bh_default {
> +		function = "USB2BH";
> +		groups = "USB2BH";
> +	};
> +
>  	pinctrl_vgabiosrom_default: vgabiosrom_default {
>  		function = "VGABIOSROM";
>  		groups = "VGABIOSROM";
> -- 
> 2.14.3
> 


-- 
  Andrew Jeffery
  andrew at aj.id.au