* [PATCH v3] ARM:dts:aspeed Add Inspur on5263m5 BMC
@ 2019-01-17 9:32 John Wang
2019-01-17 10:51 ` Andrew Jeffery
0 siblings, 1 reply; 2+ messages in thread
From: John Wang @ 2019-01-17 9:32 UTC (permalink / raw)
To: linux-aspeed
Add initial version of device tree file for on5263m5 ast2500bmc
Signed-off-by: John Wang <wangzqbj@inspur.com>
---
v3: Fix some style problems like trailing whitespace,space before tabs.
---
v2: FIx reserved memory address and correct copyright
---
arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 145 +++++++++++++++++++++++
1 file changed, 145 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 0000000..2337ee2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ON5263M5 BMC";
+ compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421 at 4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+
+ tmp112 at 48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
+ eeprom at 54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278 at 11 {
+ compatible = "adi,adm1278";
+ reg = <0x11>;
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+};
+
+&adc {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v3] ARM:dts:aspeed Add Inspur on5263m5 BMC
2019-01-17 9:32 [PATCH v3] ARM:dts:aspeed Add Inspur on5263m5 BMC John Wang
@ 2019-01-17 10:51 ` Andrew Jeffery
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Jeffery @ 2019-01-17 10:51 UTC (permalink / raw)
To: linux-aspeed
On Thu, 17 Jan 2019, at 20:02, John Wang wrote:
> Add initial version of device tree file for on5263m5 ast2500bmc
>
> Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> v3: Fix some style problems like trailing whitespace,space before tabs.
> ---
> v2: FIx reserved memory address and correct copyright
> ---
> arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 145 +++++++++++++++++++++++
> 1 file changed, 145 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/
> arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
> new file mode 100644
> index 0000000..2337ee2
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Inspur Corporation
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "ON5263M5 BMC";
> + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "earlyprintk";
> + };
> +
> + memory {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vga_memory: framebuffer at 9f000000 {
> + no-map;
> + reg = <0x9f000000 0x01000000>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + bmc_alive {
> + label = "bmc_alive";
> + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "timer";
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
> + };
> +
> +};
> +
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + };
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + tmp421 at 4e {
> + compatible = "ti,tmp421";
> + reg = <0x4e>;
> + };
> +
> + tmp112 at 48 {
> + compatible = "ti,tmp112";
> + reg = <0x48>;
> + };
> +
> + eeprom at 54 {
> + compatible = "atmel,24c64";
> + reg = <0x54>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + adm1278 at 11 {
> + compatible = "adi,adm1278";
> + reg = <0x11>;
> + };
> +};
> +
> +&gfx {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + aspeed,external-nodes = <&gfx &lhc>;
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
> +
> + fan at 0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan at 1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +};
> +
> +&adc {
> + status = "okay";
> +};
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-17 10:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-01-17 9:32 [PATCH v3] ARM:dts:aspeed Add Inspur on5263m5 BMC John Wang
2019-01-17 10:51 ` Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).