Linux-Aspeed Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Eddie James <eajames@linux.ibm.com>
Cc: andrew@codeconstruct.com.au, linux-aspeed@lists.ozlabs.org,
	 krzk+dt@kernel.org, devicetree@vger.kernel.org,
	conor+dt@kernel.org
Subject: Re: [PATCH 0/3] ARM: dts: aspeed: Add Balcones system
Date: Thu, 20 Feb 2025 15:29:11 -0600	[thread overview]
Message-ID: <174008661259.4046472.10342660435813830235.robh@kernel.org> (raw)
In-Reply-To: <20250219212735.1365050-1-eajames@linux.ibm.com>


On Wed, 19 Feb 2025 15:27:32 -0600, Eddie James wrote:
> The Balcones system is similar to Bonnell but with a POWER11 processor.
> 
> I think I've addressed all the warnings that aren't associated with
> aspeed-g6.dtsi. Please let me know otherwise Andrew! Thanks.
> 
> Eddie James (3):
>   dt-bindings: arm: aspeed: add IBM Balcones board
>   dt-bindings: hwmon: ucd90320: Add 90160 compatible
>   ARM: dts: aspeed: Add Balcones system
> 
>  .../bindings/arm/aspeed/aspeed.yaml           |   1 +
>  .../bindings/hwmon/pmbus/ti,ucd90320.yaml     |   1 +
>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>  .../dts/aspeed/aspeed-bmc-ibm-balcones.dts    | 594 +++++++++++++
>  .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
>  .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
>  6 files changed, 1378 insertions(+), 767 deletions(-)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
>  create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
> 
> --
> 2.43.5
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250219212735.1365050-1-eajames@linux.ibm.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/bus@1e78a000/i2c@400/pwm@53: failed to match any schema with compatible: ['maxim,max31785a']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: pressure-sensor@76: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#







      parent reply	other threads:[~2025-02-20 21:34 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-19 21:27 [PATCH 0/3] ARM: dts: aspeed: Add Balcones system Eddie James
2025-02-19 21:27 ` [PATCH 1/3] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-02-20 14:46   ` Krzysztof Kozlowski
2025-02-19 21:27 ` [PATCH 2/3] dt-bindings: hwmon: ucd90320: Add 90160 compatible Eddie James
2025-02-20 14:47   ` Krzysztof Kozlowski
2025-02-20 16:15     ` Eddie James
2025-02-20 18:05       ` Krzysztof Kozlowski
2025-02-19 21:27 ` [PATCH 3/3] ARM: dts: aspeed: Add Balcones system Eddie James
2025-02-20  0:41   ` Andrew Jeffery
2025-02-20 14:36     ` Eddie James
2025-02-20 21:29 ` Rob Herring (Arm) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=174008661259.4046472.10342660435813830235.robh@kernel.org \
    --to=robh@kernel.org \
    --cc=andrew@codeconstruct.com.au \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eajames@linux.ibm.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox