Re: [PATCH] dt-bindings: interrupt-controller: aspeed: Refine AST2700 binding description and example

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 14 Jul 2025 15:17:53 +0800, Ryan Chen wrote:
> - Update block diagram for better readability and accuracy.
> - Clarify the relationship and function of INTC0, INTC1, and the GIC.
> - Documentation and example refine.
> 
> This enhances the documentation quality and helps developers understand
> the interrupt controller hierarchy and usage.
> 
> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> ---
>  .../aspeed,ast2700-intc.yaml                  | 155 +++++++++++++-----
>  1 file changed, 112 insertions(+), 43 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml: address-cells: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml: size-cells: missing type definition
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dts:39.15-41: Warning (reg_format): /example-0/bus/interrupt-controller@12100000/interrupt-controller@1b00:reg: property has invalid length (12 bytes) (#address-cells == 2, #size-cells == 2)
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: interrupt-controller@12100000 (aspeed,ast2700-intc0): '#address-cells', '#size-cells' do not match any of the regexes: '^interrupt-controller@', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: interrupt-controller@12100000 (aspeed,ast2700-intc0): interrupt-controller@1b00:reg:0: [0, 303045376, 16] is too short
	from schema $id: http://devicetree.org/schemas/reg.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: interrupt-controller@14c18000 (aspeed,ast2700-intc1): '#address-cells', '#size-cells' do not match any of the regexes: '^interrupt-controller@', '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.example.dtb: interrupt-controller@14c18000 (aspeed,ast2700-intc1): interrupt-controller@100: 'interrupts' is a required property
	from schema $id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250714071753.2653620-1-ryan_chen@aspeedtech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.