From: Andrew Jeffery <andrew@aj.id.au>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH 1/4] ARM: aspeed: g4: Add USB functions to pinctrl bindings
Date: Tue, 27 Jun 2017 11:42:11 +0930 [thread overview]
Message-ID: <20170627021214.23323-2-andrew@aj.id.au> (raw)
In-Reply-To: <20170627021214.23323-1-andrew@aj.id.au>
The AST2400 contains several USB controllers:
* USB 1.1 Host Controller
* USB 2.0 Host Controller
* Combined USB 2.0 Virtual Hub and USB 1.1 HID Controller
Pins for three ports are routed to the three controllers such that:
* Port 1 is a dedicated USB 1.1 host port
* Port 2 is shared between the USB 1.1 host and HID controllers
* Port 3 is shared between the USB 2.0 host and Hub controllers
As the pins for port 1 are fixed function there is no associated mux
function or group described in the bindings. Ports 2 and 3 are muxed as
above, and the table below describes the mapping between pinmux function
names and ports:
Port | USB Version | USB Mode | Mux Function
------|--------------|-----------|-------------
1 | 1.1 | Host | -
2 | 1.1 | Host | USB11H2
2 | 1.1 | Device | USB11D1
3 | 2.0 | Host | USB2H1
3 | 2.0 | Device | USB2D1
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index ca01710ee29a..09142dab47db 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -69,8 +69,9 @@ PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
-VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1
+USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1
+WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
--
2.11.0
next prev parent reply other threads:[~2017-06-27 2:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 2:12 [PATCH 0/4] pinctrl: Add USB support for Aspeed SoCs Andrew Jeffery
2017-06-27 2:12 ` Andrew Jeffery [this message]
2017-06-27 3:53 ` [PATCH 1/4] ARM: aspeed: g4: Add USB functions to pinctrl bindings Benjamin Herrenschmidt
2017-06-30 1:13 ` Andrew Jeffery
2017-06-29 20:12 ` Rob Herring
2017-06-27 2:12 ` [PATCH 2/4] ARM: aspeed: g5: " Andrew Jeffery
2017-06-29 20:13 ` Rob Herring
2017-06-29 20:32 ` Rob Herring
2017-06-30 1:14 ` Andrew Jeffery
2017-06-27 2:12 ` [PATCH 3/4] pinctrl: aspeed: g4: Add USB device and host support Andrew Jeffery
2017-06-27 2:12 ` [PATCH 4/4] pinctrl: aspeed: g5: " Andrew Jeffery
2017-06-29 12:53 ` [PATCH 0/4] pinctrl: Add USB support for Aspeed SoCs Linus Walleij
2017-06-30 1:24 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170627021214.23323-2-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox