From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Stanley Date: Wed, 4 Oct 2017 17:19:13 +1030 Subject: [PATCH v2 5/9] ARM: dts: aspeed-palmetto: Add I2C devices In-Reply-To: <20171004064917.2498-1-joel@jms.id.au> References: <20171004064917.2498-1-joel@jms.id.au> Message-ID: <20171004064917.2498-6-joel@jms.id.au> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Enable the buses that are in use and the devices that are attached. Currently that includes the battery backed RTC, temperature measurement and EEPROM. Some of these buses are for hotplugged cards, such as PCIe cards. Others do not yet have upstream drivers, so there are no devices attached. Reviewed-by: Brendan Higgins Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 48 +++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index 112551766275..e387c80b7f4f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -61,3 +61,51 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c0 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; + + rtc at 68 { + compatible = "dallas,ds3231"; + reg = <0x68>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tmp423 at 4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; -- 2.14.1