From: Borislav Petkov <bp@alien8.de>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v2 0/2] Add support for the Aspeed AST2500 SoC EDAC driver
Date: Fri, 18 Jan 2019 15:28:31 +0100 [thread overview]
Message-ID: <20190118142831.GD622@zn.tnic> (raw)
In-Reply-To: <1547743097-5236-1-git-send-email-schaecsn@gmx.net>
On Thu, Jan 17, 2019 at 08:38:15AM -0800, Stefan Schaeckeler wrote:
> From: Stefan M Schaeckeler <sschaeck@cisco.com>
>
> Add support for the Aspeed AST2500 SoC EDAC driver.
>
> Changes since v1:
> - Addressed all cosmetic issues
> - Fixed (un-)recoverable address calculation in reg58 and reg5c
> - Removed status field from the example device tree binding
> - Added little more text to Kconfig
>
>
> Stefan M Schaeckeler (2):
> EDAC: Add Aspeed AST2500 EDAC driver
> dt-bindings: edac: Aspeed AST2500
>
> .../bindings/edac/aspeed-sdram-edac.txt | 25 ++
> MAINTAINERS | 6 +
> arch/arm/boot/dts/aspeed-g5.dtsi | 7 +
> drivers/edac/Kconfig | 8 +
> drivers/edac/Makefile | 1 +
> drivers/edac/aspeed_edac.c | 421 ++++++++++++++++++
> 6 files changed, 468 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
> create mode 100644 drivers/edac/aspeed_edac.c
>
> --
Queued, thanks.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
prev parent reply other threads:[~2019-01-18 14:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-17 16:38 [PATCH v2 0/2] Add support for the Aspeed AST2500 SoC EDAC driver Stefan Schaeckeler
2019-01-17 16:38 ` [PATCH v2 1/2] EDAC: Add Aspeed AST2500 " Stefan Schaeckeler
2019-01-17 16:38 ` [PATCH v2 2/2] dt-bindings: edac: Aspeed AST2500 Stefan Schaeckeler
2019-01-18 5:13 ` Andrew Jeffery
2019-01-18 14:28 ` Borislav Petkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118142831.GD622@zn.tnic \
--to=bp@alien8.de \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).