From mboxrd@z Thu Jan 1 00:00:00 1970 From: Borislav Petkov Date: Fri, 18 Jan 2019 15:28:31 +0100 Subject: [PATCH v2 0/2] Add support for the Aspeed AST2500 SoC EDAC driver In-Reply-To: <1547743097-5236-1-git-send-email-schaecsn@gmx.net> References: <1547743097-5236-1-git-send-email-schaecsn@gmx.net> Message-ID: <20190118142831.GD622@zn.tnic> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Thu, Jan 17, 2019 at 08:38:15AM -0800, Stefan Schaeckeler wrote: > From: Stefan M Schaeckeler > > Add support for the Aspeed AST2500 SoC EDAC driver. > > Changes since v1: > - Addressed all cosmetic issues > - Fixed (un-)recoverable address calculation in reg58 and reg5c > - Removed status field from the example device tree binding > - Added little more text to Kconfig > > > Stefan M Schaeckeler (2): > EDAC: Add Aspeed AST2500 EDAC driver > dt-bindings: edac: Aspeed AST2500 > > .../bindings/edac/aspeed-sdram-edac.txt | 25 ++ > MAINTAINERS | 6 + > arch/arm/boot/dts/aspeed-g5.dtsi | 7 + > drivers/edac/Kconfig | 8 + > drivers/edac/Makefile | 1 + > drivers/edac/aspeed_edac.c | 421 ++++++++++++++++++ > 6 files changed, 468 insertions(+) > create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt > create mode 100644 drivers/edac/aspeed_edac.c > > -- Queued, thanks. -- Regards/Gruss, Boris. Good mailing practices for 400: avoid top-posting and trim the reply.