From: Andrew Jeffery <andrew@aj.id.au>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH 1/2] dt-bindings: mmc: Document Aspeed SD controller
Date: Wed, 10 Jul 2019 23:46:10 +0930 [thread overview]
Message-ID: <20190710141611.21159-2-andrew@aj.id.au> (raw)
In-Reply-To: <20190710141611.21159-1-andrew@aj.id.au>
The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
data bus if only a single slot is enabled.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
.../bindings/mmc/sdhci-of-aspeed.yaml | 91 +++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-of-aspeed.yaml
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-aspeed.yaml b/Documentation/devicetree/bindings/mmc/sdhci-of-aspeed.yaml
new file mode 100644
index 000000000000..e98a2ac4d46d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-of-aspeed.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-of-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/eMMC Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+ - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+ The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+ Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+ only a single slot is enabled.
+
+ The two slots are supported by a common configuration area. As the SDHCIs for
+ the slots are dependent on the common configuration area, they are described
+ as child nodes.
+
+properties:
+ compatible:
+ enum: [ aspeed,ast2400-sdc, aspeed,ast2500-sdc ]
+ reg:
+ description: Common configuration registers
+ ranges: true
+ clocks:
+ maxItems: 1
+ description: The SD/SDIO controller clock gate
+ sdhci:
+ type: object
+ properties:
+ compatible:
+ allOf:
+ - enum: [ aspeed,ast2400-sdhci, aspeed,ast2500-sdhci ]
+ - const: sdhci
+ reg:
+ description: The SDHCI registers
+ clocks:
+ maxItems: 1
+ description: The SD bus clock
+ slot:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1]
+ interrupts:
+ maxItems: 1
+ description: The SD interrupt shared between both slots
+ required:
+ - compatible
+ - reg
+ - clocks
+ - slot
+ - interrupts
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ sdc at 1e740000 {
+ compatible = "aspeed,ast2500-sdc";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+ sdhci0: sdhci at 1e740100 {
+ compatible = "aspeed,ast2500-sdhci", "sdhci";
+ reg = <0x1e740100 0x100>;
+ slot = <0>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ };
+
+ sdhci1: sdhci at 1e740200 {
+ compatible = "aspeed,ast2500-sdhci", "sdhci";
+ reg = <0x1e740200 0x100>;
+ slot = <1>;
+ interrupts = <26>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ };
+ };
--
2.20.1
next prev parent reply other threads:[~2019-07-10 14:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 14:16 [PATCH 0/2] mmc: Add support for the ASPEED SD controller Andrew Jeffery
2019-07-10 14:16 ` Andrew Jeffery [this message]
2019-07-10 15:49 ` [PATCH 1/2] dt-bindings: mmc: Document Aspeed " Rob Herring
2019-07-11 0:56 ` Andrew Jeffery
2019-07-11 13:44 ` Rob Herring
2019-07-10 14:16 ` [PATCH 2/2] mmc: Add support for the ASPEED " Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190710141611.21159-2-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).