From mboxrd@z Thu Jan  1 00:00:00 1970
From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Fri, 12 Jul 2019 15:10:28 +0200
Subject: [PATCH v2 1/2] dt-bindings: mmc: Document Aspeed SD controller
In-Reply-To: <20190712033214.24713-2-andrew@aj.id.au>
References: <20190712033214.24713-1-andrew@aj.id.au>
 <20190712033214.24713-2-andrew@aj.id.au>
Message-ID: <20190712131028.ba4d4jetg4btsx4u@flea>
List-Id: <linux-aspeed.lists.ozlabs.org>
To: linux-aspeed@lists.ozlabs.org
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

Hi,

On Fri, Jul 12, 2019 at 01:02:13PM +0930, Andrew Jeffery wrote:
> The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
> SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> data bus if only a single slot is enabled.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
> In v2:
>
> * Rename to aspeed,sdhci.yaml
> * Rename sd-controller compatible
> * Add `maxItems: 1` for reg properties
> * Move sdhci subnode description to patternProperties
> * Drop sdhci compatible requirement
> * #address-cells and #size-cells are required
> * Prevent additional properties
> * Implement explicit ranges in example
> * Remove slot property
>
>  .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> new file mode 100644
> index 000000000000..67a691c3348c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED SD/SDIO/eMMC Controller
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@aj.id.au>
> +  - Ryan Chen <ryanchen.aspeed@gmail.com>
> +
> +description: |+
> +  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
> +  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
> +  only a single slot is enabled.
> +
> +  The two slots are supported by a common configuration area. As the SDHCIs for
> +  the slots are dependent on the common configuration area, they are described
> +  as child nodes.
> +
> +properties:
> +  compatible:
> +    enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ]
> +  reg:
> +    maxItems: 1
> +    description: Common configuration registers
> +  ranges: true
> +  clocks:
> +    maxItems: 1
> +    description: The SD/SDIO controller clock gate

#address-cells and #size-cells have not been described here.

> +patternProperties:
> +  "^sdhci@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        enum: [ aspeed,ast2400-sdhci, aspeed,ast2500-sdhci ]
> +      reg:
> +        maxItems: 1
> +        description: The SDHCI registers
> +      clocks:
> +        maxItems: 1
> +        description: The SD bus clock
> +      interrupts:
> +        maxItems: 1
> +        description: The SD interrupt shared between both slots
> +    required:
> +      - compatible
> +      - reg
> +      - clocks
> +      - interrupts
> +
> +additionalProperties: false

But that means that it will generate a warning in your DT if you ever
use them.

> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - clocks
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    sdc at 1e740000 {
> +            compatible = "aspeed,ast2500-sd-controller";
> +            reg = <0x1e740000 0x100>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;

Starting with your example.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20190712/ce3a4c80/attachment.sig>