From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Fri, 19 Jun 2020 08:38:32 -0700 Subject: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN In-Reply-To: <20200619144853.GA18271@cnn> References: <20200619144853.GA18271@cnn> Message-ID: <20200619153832.GA57109@roeck-us.net> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Fri, Jun 19, 2020 at 08:18:53PM +0530, Manikandan Elumalai wrote: > The adm1278 temp attribute need it for openbmc platform . > This feature not enabled by default, so PMON_CONFIG needs to enable it. > > v4: > --- > Reported-by: kernel test robot > v3: > ---- > fix invalid signed-off. > removed checkpath warnings. > write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation. > v2: > ---- > add Signed-off-by. > removed ADM1278_TEMP1_EN check. > > Signed-off-by: Manikandan Elumalai The problem is that this is after '---', meaning it is considered a comment. The Signed-off-by: tag needs to be located before the first '---'. The change log should not be part of the commit log and follow '---'. Guenter > --- > drivers/hwmon/pmbus/adm1275.c | 12 +++++------- > 1 file changed, 5 insertions(+), 7 deletions(-) > > diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c > index 5caa37fb..d4e1925 100644 > --- a/drivers/hwmon/pmbus/adm1275.c > +++ b/drivers/hwmon/pmbus/adm1275.c > @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client, > tindex = 3; > > info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | > - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; > > - /* Enable VOUT if not enabled (it is disabled by default) */ > - if (!(config & ADM1278_VOUT_EN)) { > - config |= ADM1278_VOUT_EN; > + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */ > + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) { > + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN; > ret = i2c_smbus_write_byte_data(client, > ADM1275_PMON_CONFIG, > config); > @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client, > } > } > > - if (config & ADM1278_TEMP1_EN) > - info->func[0] |= > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; > if (config & ADM1278_VIN_EN) > info->func[0] |= PMBUS_HAVE_VIN; > break; > -- > 2.7.4 >