From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Date: Thu, 10 Sep 2020 19:57:27 +0200 Subject: [PATCH v2 09/15] ARM: dts: am335x: t335: align GPIO hog names with dtschema In-Reply-To: <20200910175733.11046-1-krzk@kernel.org> References: <20200910175733.11046-1-krzk@kernel.org> Message-ID: <20200910175733.11046-10-krzk@kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/am335x-sbc-t335.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index a3f6bc4072d9..81e4453687ba 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -155,13 +155,13 @@ gpio-controller; #gpio-cells = <2>; reg = <0x26>; - dvi_ena { + dvi-ena-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high; line-name = "dvi-enable"; }; - lcd_ena { + lcd-ena-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-high; -- 2.17.1