From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eddie James Date: Mon, 29 Mar 2021 10:00:09 -0500 Subject: [PATCH 11/22] ARM: dts: aspeed: rainier 4U: Fix fan configuration In-Reply-To: <20210329150020.13632-1-eajames@linux.ibm.com> References: <20210329150020.13632-1-eajames@linux.ibm.com> Message-ID: <20210329150020.13632-12-eajames@linux.ibm.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit The 4U fans didn't have the correct properties since the fan nodes were redefined. Fix this by referencing each fan individually and adding the differences to the 4U fans. Signed-off-by: Eddie James --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts index 291f7d6c9979..f7fd3b3c90d0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts @@ -22,16 +22,30 @@ power-supply at 6b { &fan0 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan1 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan2 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan3 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; +}; + +&fan4 { + tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; +}; + +&fan5 { + tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; -- 2.27.0