From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Thu, 15 Apr 2021 18:47:50 -0700 Subject: [PATCH] watchdog: aspeed: fix integer overflow in set_timeout handler In-Reply-To: <20210416010444.GA17388@taoren-ubuntu-R90MNF91> References: <20210416001208.16788-1-rentao.bupt@gmail.com> <469ac948-d65b-471f-102f-726466c19c5c@roeck-us.net> <20210416010444.GA17388@taoren-ubuntu-R90MNF91> Message-ID: <20210416014750.GA53153@roeck-us.net> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On Thu, Apr 15, 2021 at 06:04:45PM -0700, Tao Ren wrote: > On Thu, Apr 15, 2021 at 05:50:32PM -0700, Guenter Roeck wrote: > > On 4/15/21 5:12 PM, rentao.bupt at gmail.com wrote: > > > From: Tao Ren > > > > > > Fix the time comparison (timeout vs. max_hw_heartbeat_ms) in set_timeout > > > handler to avoid potential integer overflow when the supplied timeout is > > > greater than aspeed's maximum allowed timeout (4294 seconds). > > > > > > Fixes: efa859f7d786 ("watchdog: Add Aspeed watchdog driver") > > > Reported-by: Amithash Prasad > > > Signed-off-by: Tao Ren > > > --- > > > drivers/watchdog/aspeed_wdt.c | 5 ++--- > > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c > > > index 7e00960651fa..9f77272dc906 100644 > > > --- a/drivers/watchdog/aspeed_wdt.c > > > +++ b/drivers/watchdog/aspeed_wdt.c > > > @@ -145,9 +145,8 @@ static int aspeed_wdt_set_timeout(struct watchdog_device *wdd, > > > struct aspeed_wdt *wdt = to_aspeed_wdt(wdd); > > > u32 actual; > > > > > > - wdd->timeout = timeout; > > > - > > > - actual = min(timeout, wdd->max_hw_heartbeat_ms * 1000); > > > + actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000); > > > + wdd->timeout = actual; > > > > > > writel(actual * WDT_RATE_1MHZ, wdt->base + WDT_RELOAD_VALUE); > > > writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART); > > > > > > > If the provided timeout is larger than the supported hardware timeout, > > the watchdog core will ping the hardware on behalf of userspace. > > The above code would defeat that mechanism for no good reason. > > > > NACK. > > > > Guenter > > Thanks Guenter for Joel for the quick review! > > The integer overflow happens at (actual * WDT_RATE_1MHZ). For example, > if a user tries to set timeout to 4295 seconds, then the hardware would > be programmed to timeout after about 32 milliseconds. I would say this > behavior is not expected? The fix would be - actual = min(timeout, wdd->max_hw_heartbeat_ms * 1000); + actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000); without modifying wdd->timeout = timeout; The real problem here is that "wdd->max_hw_heartbeat_ms * 1000" is simply wrong. The overflow is a side effect of the wrong calculation, and concentrating on it disguises the real problem. Guenter