* [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio
@ 2021-10-05 19:22 Adriana Kobylak
2021-10-08 4:22 ` Joel Stanley
2021-10-08 12:27 ` Eddie James
0 siblings, 2 replies; 4+ messages in thread
From: Adriana Kobylak @ 2021-10-05 19:22 UTC (permalink / raw)
To: linux-aspeed
From: Adriana Kobylak <anoo@us.ibm.com>
Add the power-config-full-load described in:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
The power-config-full-load gpio is designed to be used to specify how
many power supplies the system should have, in rainier it is 2 or 4. If
enough power supplies fail so that the system no longer has redundancy
(no longer n+1), the hardware will signal to the Onboard Chip Controller
that the system may be oversubscribed, and performance may need to be
reduced so the system can maintain it's powered on state.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
---
v2: Update commit message.
v3: Updated gpio name to power-config-full-load to match design doc.
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 33fae8ad1305..10bde77fb847 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -1998,6 +1998,19 @@ eeprom at 51 {
reg = <0x51>;
};
+ pca_pres3: pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "power-config-full-load", "";
+ };
+
pca_pres2: pca9552 at 61 {
compatible = "nxp,pca9552";
reg = <0x61>;
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio
2021-10-05 19:22 [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio Adriana Kobylak
@ 2021-10-08 4:22 ` Joel Stanley
2021-10-11 21:54 ` Adriana Kobylak
2021-10-08 12:27 ` Eddie James
1 sibling, 1 reply; 4+ messages in thread
From: Joel Stanley @ 2021-10-08 4:22 UTC (permalink / raw)
To: linux-aspeed
Hi Adriana,
On Tue, 5 Oct 2021 at 19:22, Adriana Kobylak <anoo@linux.ibm.com> wrote:
>
> From: Adriana Kobylak <anoo@us.ibm.com>
>
> Add the power-config-full-load described in:
> https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
>
> The power-config-full-load gpio is designed to be used to specify how
> many power supplies the system should have, in rainier it is 2 or 4. If
> enough power supplies fail so that the system no longer has redundancy
> (no longer n+1), the hardware will signal to the Onboard Chip Controller
> that the system may be oversubscribed, and performance may need to be
> reduced so the system can maintain it's powered on state.
>
> Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
This looks good. I think the name is much easier to understand now.
I notice you've dropped all of the other names. Do you not need them?
It would be great if one of the people you cc'd could provide a
reviewed-by before I merge this.
Cheers,
Joel
> ---
>
> v2: Update commit message.
> v3: Updated gpio name to power-config-full-load to match design doc.
>
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 33fae8ad1305..10bde77fb847 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -1998,6 +1998,19 @@ eeprom at 51 {
> reg = <0x51>;
> };
>
> + pca_pres3: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "power-config-full-load", "";
> + };
> +
> pca_pres2: pca9552 at 61 {
> compatible = "nxp,pca9552";
> reg = <0x61>;
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio
2021-10-08 4:22 ` Joel Stanley
@ 2021-10-11 21:54 ` Adriana Kobylak
0 siblings, 0 replies; 4+ messages in thread
From: Adriana Kobylak @ 2021-10-11 21:54 UTC (permalink / raw)
To: linux-aspeed
> On Oct 7, 2021, at 11:22 PM, Joel Stanley <joel@jms.id.au> wrote:
>
> Hi Adriana,
>
> On Tue, 5 Oct 2021 at 19:22, Adriana Kobylak <anoo at linux.ibm.com <mailto:anoo@linux.ibm.com>> wrote:
>>
>> From: Adriana Kobylak <anoo@us.ibm.com>
>>
>> Add the power-config-full-load described in:
>> https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
>>
>> The power-config-full-load gpio is designed to be used to specify how
>> many power supplies the system should have, in rainier it is 2 or 4. If
>> enough power supplies fail so that the system no longer has redundancy
>> (no longer n+1), the hardware will signal to the Onboard Chip Controller
>> that the system may be oversubscribed, and performance may need to be
>> reduced so the system can maintain it's powered on state.
>>
>> Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
>
> This looks good. I think the name is much easier to understand now.
Thanks, yeah agree is clearer now.
>
> I notice you've dropped all of the other names. Do you not need them?
Right, don?t need them. If we ever do, we?ll go through the same process of proposing adequate names for them in the openbmc design doc.
>
> It would be great if one of the people you cc'd could provide a
> reviewed-by before I merge this.
Sure, seems Eddie just reviewed it.
>
> Cheers,
>
> Joel
>
>> ---
>>
>> v2: Update commit message.
>> v3: Updated gpio name to power-config-full-load to match design doc.
>>
>> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
>> index 33fae8ad1305..10bde77fb847 100644
>> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
>> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
>> @@ -1998,6 +1998,19 @@ eeprom at 51 {
>> reg = <0x51>;
>> };
>>
>> + pca_pres3: pca9552 at 60 {
>> + compatible = "nxp,pca9552";
>> + reg = <0x60>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + gpio-line-names =
>> + "", "", "", "", "", "", "", "",
>> + "", "", "", "", "", "", "power-config-full-load", "";
>> + };
>> +
>> pca_pres2: pca9552 at 61 {
>> compatible = "nxp,pca9552";
>> reg = <0x61>;
>> --
>> 2.25.1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20211011/e21df504/attachment-0001.htm>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio
2021-10-05 19:22 [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio Adriana Kobylak
2021-10-08 4:22 ` Joel Stanley
@ 2021-10-08 12:27 ` Eddie James
1 sibling, 0 replies; 4+ messages in thread
From: Eddie James @ 2021-10-08 12:27 UTC (permalink / raw)
To: linux-aspeed
On 10/5/21 2:22 PM, Adriana Kobylak wrote:
> From: Adriana Kobylak <anoo@us.ibm.com>
>
> Add the power-config-full-load described in:
> https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
>
> The power-config-full-load gpio is designed to be used to specify how
> many power supplies the system should have, in rainier it is 2 or 4. If
> enough power supplies fail so that the system no longer has redundancy
> (no longer n+1), the hardware will signal to the Onboard Chip Controller
> that the system may be oversubscribed, and performance may need to be
> reduced so the system can maintain it's powered on state.
Reviewed-by: Eddie James <eajames@linux.ibm.com>
>
> Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
> ---
>
> v2: Update commit message.
> v3: Updated gpio name to power-config-full-load to match design doc.
>
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 33fae8ad1305..10bde77fb847 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -1998,6 +1998,19 @@ eeprom at 51 {
> reg = <0x51>;
> };
>
> + pca_pres3: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names =
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "power-config-full-load", "";
> + };
> +
> pca_pres2: pca9552 at 61 {
> compatible = "nxp,pca9552";
> reg = <0x61>;
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-10-11 21:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-10-05 19:22 [PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio Adriana Kobylak
2021-10-08 4:22 ` Joel Stanley
2021-10-11 21:54 ` Adriana Kobylak
2021-10-08 12:27 ` Eddie James
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).