[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

Currently the header inclusion inside the pinctrl headers seems more arbitrary
than logical. This series is basically out of two parts:
- add missed headers to the pin control drivers / users
- clean up the headers of pin control subsystem

The idea is to have this series to be pulled after -rc1 by the GPIO and
pin control subsystems, so all new drivers will utilize cleaned up headers
of the pin control.

Please, review and comment.

Changelog v2:
- added preparatory patches: all, but last (LKP)
- added missed forward declaration to the last patch (LKP)

Andy Shevchenko (36):
  gpiolib: tegra186: Add missed header(s)
  gpiolib: cdev: Add missed header(s)
  media: c8sectpfe: Add missed header(s)
  pinctrl: actions: Add missed header(s)
  pinctrl: aspeed: Add missed header(s)
  pinctrl: at91: Add missed header(s)
  pinctrl: axp209: Add missed header(s)
  pinctrl: bcm: Add missed header(s)
  pinctrl: cygnus-mux: Add missed header(s)
  pinctrl: imx: Add missed header(s)
  pinctrl: ingenic: Add missed header(s)
  pinctrl: k210: Add missed header(s)
  pinctrl: lochnagar: Add missed header(s)
  pinctrl: mediatek: Add missed header(s)
  pinctrl: mvebu: Add missed header(s)
  pinctrl: npcm7xx: Add missed header(s)
  pinctrl: ocelot: Add missed header(s)
  pinctrl: qcom: Add missed header(s)
  pinctrl: renesas: Add missed header(s)
  pinctrl: samsung: Add missed header(s)
  pinctrl: single: Add missed header(s)
  pinctrl: spear: Add missed header(s)
  pinctrl: sprd: Add missed header(s)
  pinctrl: st: Add missed header(s)
  pinctrl: starfive: Add missed header(s)
  pinctrl: stm32: Add missed header(s)
  pinctrl: stmfx: Add missed header(s)
  pinctrl: tegra: Add missed header(s)
  pinctrl: ti-iodelay: Add missed header(s)
  pinctrl: uniphier: Add missed header(s)
  pinctrl: zynqmp: Add missed header(s)
  pinctrl: cherryview: Add missed header(s)
  pinctrl: lynxpoint: Add missed header(s)
  pinctrl: merrifield: Add missed header(s)
  pinctrl: intel: Add missed header(s)
  pinctrl: Clean up headers

 drivers/gpio/gpio-tegra186.c                  |  3 +-
 drivers/gpio/gpiolib-cdev.c                   |  6 ++--
 .../st/sti/c8sectpfe/c8sectpfe-core.c         |  8 +++--
 drivers/pinctrl/actions/pinctrl-owl.c         | 10 +++---
 drivers/pinctrl/aspeed/pinctrl-aspeed.c       |  1 +
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c        | 13 +++++---
 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c      |  9 ++++--
 drivers/pinctrl/bcm/pinctrl-iproc-gpio.c      | 12 ++++---
 drivers/pinctrl/bcm/pinctrl-ns2-mux.c         |  8 +++--
 drivers/pinctrl/bcm/pinctrl-nsp-mux.c         |  8 +++--
 drivers/pinctrl/cirrus/pinctrl-lochnagar.c    |  6 ++--
 drivers/pinctrl/core.c                        | 19 ++++++------
 drivers/pinctrl/core.h                        | 12 ++++++-
 drivers/pinctrl/devicetree.h                  |  6 ++++
 drivers/pinctrl/freescale/pinctrl-imx.c       |  8 +++--
 drivers/pinctrl/intel/pinctrl-cherryview.c    |  6 ++--
 drivers/pinctrl/intel/pinctrl-intel.c         |  6 ++--
 drivers/pinctrl/intel/pinctrl-lynxpoint.c     |  6 ++--
 drivers/pinctrl/intel/pinctrl-merrifield.c    |  4 ++-
 drivers/pinctrl/mediatek/pinctrl-moore.c      |  3 ++
 drivers/pinctrl/mediatek/pinctrl-paris.c      |  5 +++
 drivers/pinctrl/mvebu/pinctrl-mvebu.c         | 14 +++++----
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c     | 11 ++++---
 drivers/pinctrl/pinconf.h                     | 10 ++++++
 drivers/pinctrl/pinctrl-at91-pio4.c           | 10 ++++--
 drivers/pinctrl/pinctrl-at91.c                | 16 +++++-----
 drivers/pinctrl/pinctrl-axp209.c              |  8 +++--
 drivers/pinctrl/pinctrl-ingenic.c             | 10 +++---
 drivers/pinctrl/pinctrl-k210.c                | 12 ++++---
 drivers/pinctrl/pinctrl-ocelot.c              | 10 +++---
 drivers/pinctrl/pinctrl-single.c              |  5 ++-
 drivers/pinctrl/pinctrl-st.c                  | 21 ++++++++-----
 drivers/pinctrl/pinctrl-stmfx.c               |  2 ++
 drivers/pinctrl/pinctrl-utils.h               |  5 +++
 drivers/pinctrl/pinctrl-zynqmp.c              |  4 ++-
 drivers/pinctrl/pinmux.c                      | 17 +++++-----
 drivers/pinctrl/pinmux.h                      | 11 +++++++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |  8 +++--
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c       |  8 +++--
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       |  7 +++--
 drivers/pinctrl/renesas/pinctrl-rzv2m.c       |  4 ++-
 drivers/pinctrl/renesas/pinctrl.c             |  8 +++--
 drivers/pinctrl/samsung/pinctrl-samsung.c     | 11 ++++---
 drivers/pinctrl/spear/pinctrl-spear.c         |  6 ++--
 drivers/pinctrl/sprd/pinctrl-sprd.c           |  6 ++--
 .../starfive/pinctrl-starfive-jh7100.c        |  2 ++
 drivers/pinctrl/stm32/pinctrl-stm32.c         | 16 +++++-----
 drivers/pinctrl/tegra/pinctrl-tegra.c         |  6 ++--
 drivers/pinctrl/ti/pinctrl-ti-iodelay.c       |  8 +++--
 .../pinctrl/uniphier/pinctrl-uniphier-core.c  |  8 +++--
 include/linux/pinctrl/consumer.h              | 31 +++++++++----------
 include/linux/pinctrl/devinfo.h               |  6 ++--
 include/linux/pinctrl/machine.h               |  8 +++--
 include/linux/pinctrl/pinconf-generic.h       | 23 ++++++++------
 include/linux/pinctrl/pinctrl.h               | 18 +++++------
 include/linux/pinctrl/pinmux.h                |  5 ++-
 56 files changed, 328 insertions(+), 186 deletions(-)


base-commit: 9d157c89c5569f0ef560b7a5b2d7bf59ae98499c
-- 
2.35.1

[PATCH v2 01/36] gpiolib: tegra186: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpio-tegra186.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 54d9fa7da9c1..fdc5bdcd5638 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -7,12 +7,13 @@
  */
 
 #include <linux/gpio/driver.h>
+#include <linux/hte.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/hte.h>
+#include <linux/seq_file.h>
 
 #include <dt-bindings/gpio/tegra186-gpio.h>
 #include <dt-bindings/gpio/tegra194-gpio.h>
-- 
2.35.1

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-cdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index f8041d4898d1..60a60e2d60c5 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -10,8 +10,9 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/file.h>
-#include <linux/gpio.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio.h>
+#include <linux/hte.h>
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/kernel.h>
@@ -20,11 +21,12 @@
 #include <linux/mutex.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/poll.h>
+#include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/timekeeping.h>
 #include <linux/uaccess.h>
 #include <linux/workqueue.h>
-#include <linux/hte.h>
+
 #include <uapi/linux/gpio.h>
 
 #include "gpiolib.h"
-- 
2.35.1

[PATCH v2 03/36] media: c8sectpfe: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
index cefe6b7bfdc4..4c5027a0480d 100644
--- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
@@ -24,16 +24,18 @@
 #include <linux/module.h>
 #include <linux/of_gpio.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
-#include <linux/usb.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/usb.h>
 #include <linux/wait.h>
-#include <linux/pinctrl/pinctrl.h>
 
-#include "c8sectpfe-core.h"
 #include "c8sectpfe-common.h"
+#include "c8sectpfe-core.h"
 #include "c8sectpfe-debugfs.h"
+
 #include <media/dmxdev.h>
 #include <media/dvb_demux.h>
 #include <media/dvb_frontend.h>
-- 
2.35.1

[PATCH v2 04/36] pinctrl: actions: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/actions/pinctrl-owl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
index ed46abc15d72..a84ace6e451e 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.c
+++ b/drivers/pinctrl/actions/pinctrl-owl.c
@@ -17,13 +17,15 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 
 #include "../core.h"
 #include "../pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 05/36] pinctrl: aspeed: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index a30912a92f05..3945612900e6 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -5,6 +5,7 @@
 
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include "../core.h"
-- 
2.35.1

[PATCH v2 06/36] pinctrl: at91: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 10 +++++++---
 drivers/pinctrl/pinctrl-at91.c      | 16 +++++++++-------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 82b921fd630d..e38c683aba09 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -7,18 +7,22 @@
  */
 
 #include <dt-bindings/pinctrl/at91.h>
+
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/slab.h>
+
 #include "core.h"
 #include "pinconf.h"
 #include "pinctrl-utils.h"
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 81dbffab621f..1e1813d7c550 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -7,22 +7,24 @@
 
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/gpio/driver.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/pm.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
+
+/* Since we request GPIOs from ourself */
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-/* Since we request GPIOs from ourself */
-#include <linux/pinctrl/consumer.h>
-#include <linux/pm.h>
 
 #include "pinctrl-at91.h"
 #include "core.h"
-- 
2.35.1

[PATCH v2 07/36] pinctrl: axp209: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-axp209.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index 7ab20ac15391..0bc1b381a2b8 100644
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -16,13 +16,15 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
 #define AXP20X_GPIO_FUNCTIONS		0x7
 #define AXP20X_GPIO_FUNCTION_OUT_LOW	0
 #define AXP20X_GPIO_FUNCTION_OUT_HIGH	1
-- 
2.35.1

[PATCH v2 08/36] pinctrl: bcm: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c   | 13 ++++++++-----
 drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 12 +++++++-----
 drivers/pinctrl/bcm/pinctrl-ns2-mux.c    |  8 +++++---
 drivers/pinctrl/bcm/pinctrl-nsp-mux.c    |  8 +++++---
 4 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index fd52a83387ef..73dbf29c002f 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -2,16 +2,19 @@
 // Copyright (C) 2013-2017 Broadcom
 
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include "../core.h"
 #include "../pinctrl-utils.h"
 
diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 52fa2f4cd618..3df56a4ea510 100644
--- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -16,17 +16,19 @@
  * SoCs IOMUX controller.
  */
 
-#include <linux/kernel.h>
-#include <linux/slab.h>
+#include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/gpio/driver.h>
 #include <linux/ioport.h>
+#include <linux/kernel.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/slab.h>
+
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
 
 #include "../pinctrl-utils.h"
 
diff --git a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
index 960e253f0be4..04f4fca854cc 100644
--- a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
+++ b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c
@@ -9,12 +9,14 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include "../core.h"
 #include "../pinctrl-utils.h"
diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
index db8f79920ff0..eb6298507c1d 100644
--- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c
@@ -20,12 +20,14 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include "../core.h"
 #include "../pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 09/36] pinctrl: cygnus-mux: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
index 5251460f6327..bf9597800954 100644
--- a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
+++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
@@ -13,12 +13,15 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
+
 #include "../core.h"
 #include "../pinctrl-utils.h"
 
-- 
2.35.1

[PATCH v2 10/36] pinctrl: imx: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 3a7d2de10b13..e9aef764138f 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -13,14 +13,16 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/slab.h>
-#include <linux/regmap.h>
 
 #include "../core.h"
 #include "../pinconf.h"
-- 
2.35.1

[PATCH v2 11/36] pinctrl: ingenic: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-ingenic.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 7e732076dedf..dbc25a60fbff 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -14,16 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/mod_devicetable.h>
 #include <linux/of.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include "core.h"
 #include "pinconf.h"
 #include "pinmux.h"
-- 
2.35.1

[PATCH v2 12/36] pinctrl: k210: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-k210.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c
index ecab6bf63dc6..288e44457fec 100644
--- a/drivers/pinctrl/pinctrl-k210.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -3,18 +3,20 @@
  * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
-#include <linux/io.h>
-#include <linux/of_device.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 #include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
-#include <linux/bitfield.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 
 #include <dt-bindings/pinctrl/k210-fpioa.h>
 
-- 
2.35.1

[PATCH v2 13/36] pinctrl: lochnagar: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/cirrus/pinctrl-lochnagar.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/cirrus/pinctrl-lochnagar.c b/drivers/pinctrl/cirrus/pinctrl-lochnagar.c
index 3fda4446d70b..0b78cf611afe 100644
--- a/drivers/pinctrl/cirrus/pinctrl-lochnagar.c
+++ b/drivers/pinctrl/cirrus/pinctrl-lochnagar.c
@@ -15,10 +15,12 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 
 #include <linux/mfd/lochnagar.h>
 #include <linux/mfd/lochnagar1_regs.h>
-- 
2.35.1

[PATCH v2 14/36] pinctrl: mediatek: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/mediatek/pinctrl-moore.c | 3 +++
 drivers/pinctrl/mediatek/pinctrl-paris.c | 5 +++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c
index 526faaebaf77..9474ada5addb 100644
--- a/drivers/pinctrl/mediatek/pinctrl-moore.c
+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
@@ -9,6 +9,9 @@
  */
 
 #include <linux/gpio/driver.h>
+
+#include <linux/pinctrl/consumer.h>
+
 #include "pinctrl-moore.h"
 
 #define PINCTRL_PINCTRL_DEV		KBUILD_MODNAME
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 74517e810958..475f4172d508 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -11,7 +11,12 @@
 
 #include <linux/gpio/driver.h>
 #include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <linux/pinctrl/consumer.h>
+
 #include <dt-bindings/pinctrl/mt65xx.h>
+
 #include "pinctrl-paris.h"
 
 #define PINCTRL_PINCTRL_DEV	KBUILD_MODNAME
-- 
2.35.1

[PATCH v2 15/36] pinctrl: mvebu: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/mvebu/pinctrl-mvebu.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
index 8ef0a97d2bf5..8e6aac4164df 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -6,20 +6,22 @@
  *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  */
 
-#include <linux/platform_device.h>
-#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/err.h>
-#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 
 #include "pinctrl-mvebu.h"
 
-- 
2.35.1

[PATCH v2 16/36] pinctrl: npcm7xx: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
index 1c4e89b046de..ff5bcea172e8 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -11,14 +11,17 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/regmap.h>
 
 /* GCR registers */
 #define NPCM7XX_GCR_PDID	0x00
-- 
2.35.1

[PATCH v2 17/36] pinctrl: ocelot: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-ocelot.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 647e91490bac..a9343c242cd5 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -13,15 +13,17 @@
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include "core.h"
 #include "pinconf.h"
 #include "pinmux.h"
-- 
2.35.1

[PATCH v2 18/36] pinctrl: qcom: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 8 +++++---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c  | 8 +++++---
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 8c31a8f6b7e4..89695b5a2ce7 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -9,15 +9,17 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/spmi.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 #include "../core.h"
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 6937157f50b3..063177b79927 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -7,14 +7,16 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 #include "../core.h"
-- 
2.35.1

[PATCH v2 19/36] pinctrl: renesas: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 7 +++++--
 drivers/pinctrl/renesas/pinctrl-rzv2m.c | 4 +++-
 drivers/pinctrl/renesas/pinctrl.c       | 8 +++++---
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index a43824fd9505..a08eee092430 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -8,16 +8,19 @@
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/spinlock.h>
 
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
diff --git a/drivers/pinctrl/renesas/pinctrl-rzv2m.c b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
index e8c18198bebd..061f16c77304 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzv2m.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
@@ -15,11 +15,13 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/spinlock.h>
 
 #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
 
diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c
index b438d24c13b5..b74147800319 100644
--- a/drivers/pinctrl/renesas/pinctrl.c
+++ b/drivers/pinctrl/renesas/pinctrl.c
@@ -12,14 +12,16 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 
 #include "core.h"
 #include "../core.h"
-- 
2.35.1

[PATCH v2 20/36] pinctrl: samsung: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/samsung/pinctrl-samsung.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index bd13b5ef246d..5736761927cb 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -15,15 +15,16 @@
 // but provides extensions to which platform specific implementation of the gpio
 // and wakeup interrupts can be hooked to.
 
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/property.h>
-#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 
 #include "../core.h"
-- 
2.35.1

[PATCH v2 21/36] pinctrl: single: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-single.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 67bec7ea0f8b..bed97ac5b848 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -16,17 +16,16 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-
 #include <linux/irqchip/chained_irq.h>
-
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/seq_file.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf-generic.h>
 
 #include <linux/platform_data/pinctrl-single.h>
 
-- 
2.35.1

[PATCH v2 22/36] pinctrl: spear: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/spear/pinctrl-spear.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index e0543c1ad641..18de2e70ea50 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -19,11 +19,13 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include "pinctrl-spear.h"
 
-- 
2.35.1

[PATCH v2 23/36] pinctrl: sprd: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/sprd/pinctrl-sprd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index dca7a505d413..c1806b7dcf78 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -13,12 +13,14 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/slab.h>
 
 #include "../core.h"
 #include "../pinmux.h"
-- 
2.35.1

[PATCH v2 24/36] pinctrl: st: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-st.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index cf7f9cbe6044..985dfceb127d 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -5,21 +5,26 @@
  *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
 #include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_address.h>
-#include <linux/gpio/driver.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/string_helpers.h>
+
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/platform_device.h>
+
 #include "core.h"
 
 /* PIO Block registers */
-- 
2.35.1

[PATCH v2 25/36] pinctrl: starfive: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
index 5b544fb7f3d8..6a8a9cfe8965 100644
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
@@ -15,8 +15,10 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
+#include <linux/seq_file.h>
 #include <linux/spinlock.h>
 
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 
-- 
2.35.1

[PATCH v2 26/36] pinctrl: stm32: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index e485506ea599..cc9472b28404 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -13,22 +13,24 @@
 #include <linux/irq.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include "../core.h"
 #include "../pinconf.h"
 #include "../pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 27/36] pinctrl: stmfx: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-stmfx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index ab4dde40d3ed..1181c4b506b1 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -10,6 +10,8 @@
 #include <linux/mfd/stmfx.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
 
-- 
2.35.1

[PATCH v2 28/36] pinctrl: tegra: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 50bd26a30ac0..834a2d50f89b 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -15,11 +15,13 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/slab.h>
 
 #include "../core.h"
 #include "../pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 29/36] pinctrl: ti-iodelay: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/ti/pinctrl-ti-iodelay.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c
index 4e2382778d38..53abddaebce1 100644
--- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c
+++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c
@@ -15,12 +15,14 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinctrl.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+
 #include "../core.h"
 #include "../devicetree.h"
 
-- 
2.35.1

[PATCH v2 30/36] pinctrl: uniphier: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/uniphier/pinctrl-uniphier-core.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
index ade348b49b31..18d3a4f69e63 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
@@ -6,12 +6,14 @@
 #include <linux/list.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
 
 #include "../core.h"
 #include "../pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 31/36] pinctrl: zynqmp: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/pinctrl-zynqmp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c
index 7d2fbf8a02cd..1a94db1ffa4f 100644
--- a/drivers/pinctrl/pinctrl-zynqmp.c
+++ b/drivers/pinctrl/pinctrl-zynqmp.c
@@ -14,10 +14,12 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+
 #include <linux/firmware/xlnx-zynqmp.h>
 
-#include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
 
 #include "core.h"
 #include "pinctrl-utils.h"
-- 
2.35.1

[PATCH v2 32/36] pinctrl: cherryview: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index 5c4fd16e5b01..11b81213922d 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -16,12 +16,14 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/seq_file.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 
 #include "pinctrl-intel.h"
 
-- 
2.35.1

[PATCH v2 33/36] pinctrl: lynxpoint: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-lynxpoint.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
index 5d1abee30f8f..8d05dad38556 100644
--- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c
+++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
@@ -16,13 +16,15 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
 
 #include "pinctrl-intel.h"
 
-- 
2.35.1

[PATCH v2 34/36] pinctrl: merrifield: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-merrifield.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c
index 5e752818adb4..527957ea35b7 100644
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -12,8 +12,10 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/seq_file.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
 
-- 
2.35.1

[PATCH v2 35/36] pinctrl: intel: Add missed header(s)

[Andy Shevchenko]

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-intel.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 52ecd66ce357..b85140eaa9c4 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -14,12 +14,14 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/seq_file.h>
 #include <linux/time.h>
 
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
 
 #include "../core.h"
 #include "pinctrl-intel.h"
-- 
2.35.1

[PATCH v2 36/36] pinctrl: Clean up headers

[Andy Shevchenko]

There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missed headers
- group generic headers and subsystem headers
- sort each group alphabetically

While at it, fix some awkward indentations.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/core.c                  | 19 ++++++++-------
 drivers/pinctrl/core.h                  | 12 +++++++++-
 drivers/pinctrl/devicetree.h            |  6 +++++
 drivers/pinctrl/pinconf.h               | 10 ++++++++
 drivers/pinctrl/pinctrl-utils.h         |  5 ++++
 drivers/pinctrl/pinmux.c                | 17 ++++++++------
 drivers/pinctrl/pinmux.h                | 11 +++++++++
 include/linux/pinctrl/consumer.h        | 31 +++++++++++--------------
 include/linux/pinctrl/devinfo.h         |  6 +++--
 include/linux/pinctrl/machine.h         |  8 ++++---
 include/linux/pinctrl/pinconf-generic.h | 23 ++++++++++--------
 include/linux/pinctrl/pinctrl.h         | 18 +++++++-------
 include/linux/pinctrl/pinmux.h          |  5 ++--
 13 files changed, 110 insertions(+), 61 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 9e57f4c62e60..655f9502e73f 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -12,19 +12,21 @@
  */
 #define pr_fmt(fmt) "pinctrl core: " fmt
 
-#include <linux/kernel.h>
-#include <linux/kref.h>
-#include <linux/export.h>
-#include <linux/init.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
-#include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
 #include <linux/list.h>
-#include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
+
 #include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/devinfo.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
 
 #ifdef CONFIG_GPIOLIB
 #include "../gpio/gpiolib.h"
@@ -33,9 +35,8 @@
 
 #include "core.h"
 #include "devicetree.h"
-#include "pinmux.h"
 #include "pinconf.h"
-
+#include "pinmux.h"
 
 static bool pinctrl_dummy_state;
 
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 840103c40c14..4d0bdb9fb99b 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -9,12 +9,22 @@
  */
 
 #include <linux/kref.h>
+#include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/radix-tree.h>
-#include <linux/pinctrl/pinconf.h>
+#include <linux/types.h>
+
 #include <linux/pinctrl/machine.h>
 
+struct dentry;
+struct device;
+struct device_node;
+struct module;
+
+struct pinctrl;
+struct pinctrl_desc;
 struct pinctrl_gpio_range;
+struct pinctrl_state;
 
 /**
  * struct pinctrl_dev - pin control class device
diff --git a/drivers/pinctrl/devicetree.h b/drivers/pinctrl/devicetree.h
index efa80779de4f..def76aba99d1 100644
--- a/drivers/pinctrl/devicetree.h
+++ b/drivers/pinctrl/devicetree.h
@@ -5,8 +5,14 @@
  * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
  */
 
+#include <linux/errno.h>
+
+struct device_node;
 struct of_phandle_args;
 
+struct pinctrl;
+struct pinctrl_dev;
+
 #ifdef CONFIG_OF
 
 void pinctrl_dt_free_maps(struct pinctrl *p);
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index be7311373299..694bfc9961fa 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -10,6 +10,16 @@
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
 
+#include <linux/errno.h>
+
+struct dentry;
+struct device_node;
+struct seq_file;
+
+struct pinctrl_dev;
+struct pinctrl_map;
+struct pinctrl_setting;
+
 #ifdef CONFIG_PINCONF
 
 int pinconf_check_ops(struct pinctrl_dev *pctldev);
diff --git a/drivers/pinctrl/pinctrl-utils.h b/drivers/pinctrl/pinctrl-utils.h
index cec407a8cc4e..4108ee2dd6d0 100644
--- a/drivers/pinctrl/pinctrl-utils.h
+++ b/drivers/pinctrl/pinctrl-utils.h
@@ -9,6 +9,11 @@
 #ifndef __PINCTRL_UTILS_H__
 #define __PINCTRL_UTILS_H__
 
+#include <linux/pinctrl/machine.h>
+
+struct pinctrl_dev;
+struct pinctrl_map;
+
 int pinctrl_utils_reserve_map(struct pinctrl_dev *pctldev,
 		struct pinctrl_map **map, unsigned *reserved_maps,
 		unsigned *num_maps, unsigned reserve);
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index f94d43b082d9..6bd7ac37a0e0 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -13,19 +13,22 @@
 #define pr_fmt(fmt) "pinmux core: " fmt
 
 #include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/radix-tree.h>
 #include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/list.h>
-#include <linux/string.h>
-#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/radix-tree.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
+
 #include "core.h"
 #include "pinmux.h"
 
diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h
index 72fcf03eaa43..ea6f99c24aa5 100644
--- a/drivers/pinctrl/pinmux.h
+++ b/drivers/pinctrl/pinmux.h
@@ -9,6 +9,17 @@
  *
  * Author: Linus Walleij <linus.walleij@linaro.org>
  */
+
+#include <linux/types.h>
+
+struct dentry;
+struct seq_file;
+
+struct pinctrl_dev;
+struct pinctrl_gpio_range;
+struct pinctrl_map;
+struct pinctrl_setting;
+
 #ifdef CONFIG_PINMUX
 
 int pinmux_check_ops(struct pinctrl_dev *pctldev);
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index 019fecd75d0c..4729d54e8995 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -12,14 +12,15 @@
 #define __LINUX_PINCTRL_CONSUMER_H
 
 #include <linux/err.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
+#include <linux/types.h>
+
 #include <linux/pinctrl/pinctrl-state.h>
 
+struct device;
+
 /* This struct is private to the core and should be regarded as a cookie */
 struct pinctrl;
 struct pinctrl_state;
-struct device;
 
 #ifdef CONFIG_PINCTRL
 
@@ -33,9 +34,8 @@ extern int pinctrl_gpio_set_config(unsigned gpio, unsigned long config);
 
 extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
 extern void pinctrl_put(struct pinctrl *p);
-extern struct pinctrl_state * __must_check pinctrl_lookup_state(
-							struct pinctrl *p,
-							const char *name);
+extern struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p,
+								const char *name);
 extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
 
 extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
@@ -101,9 +101,8 @@ static inline void pinctrl_put(struct pinctrl *p)
 {
 }
 
-static inline struct pinctrl_state * __must_check pinctrl_lookup_state(
-							struct pinctrl *p,
-							const char *name)
+static inline struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p,
+								       const char *name)
 {
 	return NULL;
 }
@@ -145,8 +144,8 @@ static inline int pinctrl_pm_select_idle_state(struct device *dev)
 
 #endif /* CONFIG_PINCTRL */
 
-static inline struct pinctrl * __must_check pinctrl_get_select(
-					struct device *dev, const char *name)
+static inline struct pinctrl * __must_check pinctrl_get_select(struct device *dev,
+							       const char *name)
 {
 	struct pinctrl *p;
 	struct pinctrl_state *s;
@@ -171,14 +170,13 @@ static inline struct pinctrl * __must_check pinctrl_get_select(
 	return p;
 }
 
-static inline struct pinctrl * __must_check pinctrl_get_select_default(
-					struct device *dev)
+static inline struct pinctrl * __must_check pinctrl_get_select_default(struct device *dev)
 {
 	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
 }
 
-static inline struct pinctrl * __must_check devm_pinctrl_get_select(
-					struct device *dev, const char *name)
+static inline struct pinctrl * __must_check devm_pinctrl_get_select(struct device *dev,
+								    const char *name)
 {
 	struct pinctrl *p;
 	struct pinctrl_state *s;
@@ -203,8 +201,7 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select(
 	return p;
 }
 
-static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
-					struct device *dev)
+static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(struct device *dev)
 {
 	return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
 }
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
index a48ff69acddd..9e8b559e1253 100644
--- a/include/linux/pinctrl/devinfo.h
+++ b/include/linux/pinctrl/devinfo.h
@@ -14,11 +14,15 @@
 #ifndef PINCTRL_DEVINFO_H
 #define PINCTRL_DEVINFO_H
 
+struct device;
+
 #ifdef CONFIG_PINCTRL
 
 /* The device core acts as a consumer toward pinctrl */
 #include <linux/pinctrl/consumer.h>
 
+struct pinctrl;
+
 /**
  * struct dev_pin_info - pin state container for devices
  * @p: pinctrl handle for the containing device
@@ -42,8 +46,6 @@ extern int pinctrl_init_done(struct device *dev);
 
 #else
 
-struct device;
-
 /* Stubs if we're not using pinctrl */
 
 static inline int pinctrl_bind_pins(struct device *dev)
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
index e987dc9fd2af..0639b36f43c5 100644
--- a/include/linux/pinctrl/machine.h
+++ b/include/linux/pinctrl/machine.h
@@ -11,7 +11,7 @@
 #ifndef __LINUX_PINCTRL_MACHINE_H
 #define __LINUX_PINCTRL_MACHINE_H
 
-#include <linux/bug.h>
+#include <linux/kernel.h>	/* ARRAY_SIZE() */
 
 #include <linux/pinctrl/pinctrl-state.h>
 
@@ -149,16 +149,18 @@ struct pinctrl_map {
 #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
 	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
 
+struct pinctrl_map;
+
 #ifdef CONFIG_PINCTRL
 
 extern int pinctrl_register_mappings(const struct pinctrl_map *map,
-				unsigned num_maps);
+				     unsigned num_maps);
 extern void pinctrl_unregister_mappings(const struct pinctrl_map *map);
 extern void pinctrl_provide_dummies(void);
 #else
 
 static inline int pinctrl_register_mappings(const struct pinctrl_map *map,
-					   unsigned num_maps)
+					    unsigned num_maps)
 {
 	return 0;
 }
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 2422211d6a5a..940fc4e9e17c 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -11,9 +11,12 @@
 #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
 #define __LINUX_PINCTRL_PINCONF_GENERIC_H
 
-#include <linux/device.h>
+#include <linux/types.h>
+
 #include <linux/pinctrl/machine.h>
 
+struct device_node;
+
 struct pinctrl_dev;
 struct pinctrl_map;
 
@@ -196,25 +199,25 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
 void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev,
 		struct pinctrl_map *map, unsigned num_maps);
 
-static inline int pinconf_generic_dt_node_to_map_group(
-		struct pinctrl_dev *pctldev, struct device_node *np_config,
-		struct pinctrl_map **map, unsigned *num_maps)
+static inline int pinconf_generic_dt_node_to_map_group(struct pinctrl_dev *pctldev,
+		struct device_node *np_config, struct pinctrl_map **map,
+		unsigned *num_maps)
 {
 	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
 			PIN_MAP_TYPE_CONFIGS_GROUP);
 }
 
-static inline int pinconf_generic_dt_node_to_map_pin(
-		struct pinctrl_dev *pctldev, struct device_node *np_config,
-		struct pinctrl_map **map, unsigned *num_maps)
+static inline int pinconf_generic_dt_node_to_map_pin(struct pinctrl_dev *pctldev,
+		struct device_node *np_config, struct pinctrl_map **map,
+		unsigned *num_maps)
 {
 	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
 			PIN_MAP_TYPE_CONFIGS_PIN);
 }
 
-static inline int pinconf_generic_dt_node_to_map_all(
-		struct pinctrl_dev *pctldev, struct device_node *np_config,
-		struct pinctrl_map **map, unsigned *num_maps)
+static inline int pinconf_generic_dt_node_to_map_all(struct pinctrl_dev *pctldev,
+		struct device_node *np_config, struct pinctrl_map **map,
+		unsigned *num_maps)
 {
 	/*
 	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 487117ccb1bc..31fe992412f0 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -11,20 +11,20 @@
 #ifndef __LINUX_PINCTRL_PINCTRL_H
 #define __LINUX_PINCTRL_PINCTRL_H
 
-#include <linux/radix-tree.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/pinctrl/pinctrl-state.h>
-#include <linux/pinctrl/devinfo.h>
+#include <linux/types.h>
 
 struct device;
+struct device_node;
+struct gpio_chip;
+struct module;
+struct seq_file;
+
+struct pin_config_item;
+struct pinconf_generic_params;
+struct pinconf_ops;
 struct pinctrl_dev;
 struct pinctrl_map;
 struct pinmux_ops;
-struct pinconf_ops;
-struct pin_config_item;
-struct gpio_chip;
-struct device_node;
 
 /**
  * struct pingroup - provides information on pingroup
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
index 9a647fa5c8f1..a7e370965c53 100644
--- a/include/linux/pinctrl/pinmux.h
+++ b/include/linux/pinctrl/pinmux.h
@@ -11,11 +11,10 @@
 #ifndef __LINUX_PINCTRL_PINMUX_H
 #define __LINUX_PINCTRL_PINMUX_H
 
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/pinctrl/pinctrl.h>
+#include <linux/types.h>
 
 struct pinctrl_dev;
+struct pinctrl_gpio_range;
 
 /**
  * struct pinmux_ops - pinmux operations, to be implemented by pin controller
-- 
2.35.1

[PATCH v2 12/36] pinctrl: k210: Add missed header(s)

[Damien Le Moal]

On 2022/10/11 5:15, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Looks OK to me, but the patch title should be:

pinctrl: k210: Add missing header(s)

Same remark for the entire series. You need s/missed/missing in all patch titles.

With that fixed,

Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

> ---
>  drivers/pinctrl/pinctrl-k210.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c
> index ecab6bf63dc6..288e44457fec 100644
> --- a/drivers/pinctrl/pinctrl-k210.c
> +++ b/drivers/pinctrl/pinctrl-k210.c
> @@ -3,18 +3,20 @@
>   * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
>   * Copyright (c) 2020 Western Digital Corporation or its affiliates.
>   */
> -#include <linux/io.h>
> -#include <linux/of_device.h>
> +#include <linux/bitfield.h>
>  #include <linux/clk.h>
> +#include <linux/io.h>
>  #include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
> -#include <linux/bitfield.h>
>  #include <linux/regmap.h>
> +#include <linux/seq_file.h>
>  #include <linux/slab.h>
> +
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> -#include <linux/pinctrl/pinconf.h>
> -#include <linux/pinctrl/pinconf-generic.h>
>  
>  #include <dt-bindings/pinctrl/k210-fpioa.h>
>  

-- 
Damien Le Moal
Western Digital Research

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Kent Gibson]

On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/gpio/gpiolib-cdev.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
> index f8041d4898d1..60a60e2d60c5 100644
> --- a/drivers/gpio/gpiolib-cdev.c
> +++ b/drivers/gpio/gpiolib-cdev.c
> @@ -10,8 +10,9 @@
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/file.h>
> -#include <linux/gpio.h>
>  #include <linux/gpio/driver.h>
> +#include <linux/gpio.h>
> +#include <linux/hte.h>

Ok with the hte re-order.

But moving the gpio subsystem header after the gpio/driver is not
alphabetical ('.' precedes '/') and it read better and made more sense
to me the way it was.

>  #include <linux/interrupt.h>
>  #include <linux/irqreturn.h>
>  #include <linux/kernel.h>
> @@ -20,11 +21,12 @@
>  #include <linux/mutex.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/poll.h>
> +#include <linux/seq_file.h>

I wasn't aware that we use anything from seq_file.
What am I missing?

Cheers,
Kent.

>  #include <linux/spinlock.h>
>  #include <linux/timekeeping.h>
>  #include <linux/uaccess.h>
>  #include <linux/workqueue.h>
> -#include <linux/hte.h>
> +
>  #include <uapi/linux/gpio.h>
>  
>  #include "gpiolib.h"
> -- 
> 2.35.1
> 

[PATCH v2 22/36] pinctrl: spear: Add missed header(s)

[Viresh Kumar]

On 10-10-22, 23:14, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/spear/pinctrl-spear.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
> index e0543c1ad641..18de2e70ea50 100644
> --- a/drivers/pinctrl/spear/pinctrl-spear.c
> +++ b/drivers/pinctrl/spear/pinctrl-spear.c
> @@ -19,11 +19,13 @@
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/slab.h>
> +
>  #include <linux/pinctrl/machine.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
>  
>  #include "pinctrl-spear.h"

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH v2 24/36] pinctrl: st: Add missed header(s)

[Patrice CHOTARD]

On 10/10/22 22:14, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/pinctrl-st.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
> index cf7f9cbe6044..985dfceb127d 100644
> --- a/drivers/pinctrl/pinctrl-st.c
> +++ b/drivers/pinctrl/pinctrl-st.c
> @@ -5,21 +5,26 @@
>   *	Srinivas Kandagatla <srinivas.kandagatla@st.com>
>   */
>  
> -#include <linux/init.h>
> -#include <linux/module.h>
> -#include <linux/slab.h>
>  #include <linux/err.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
>  #include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
>  #include <linux/of.h>
> -#include <linux/of_irq.h>
>  #include <linux/of_address.h>
> -#include <linux/gpio/driver.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
>  #include <linux/regmap.h>
> -#include <linux/mfd/syscon.h>
> +#include <linux/seq_file.h>
> +#include <linux/slab.h>
> +#include <linux/string_helpers.h>
> +
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/pinconf.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> -#include <linux/pinctrl/pinconf.h>
> -#include <linux/platform_device.h>
> +
>  #include "core.h"
>  
>  /* PIO Block registers */

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Bartosz Golaszewski]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Currently the header inclusion inside the pinctrl headers seems more arbitrary
> than logical. This series is basically out of two parts:
> - add missed headers to the pin control drivers / users
> - clean up the headers of pin control subsystem
>
> The idea is to have this series to be pulled after -rc1 by the GPIO and
> pin control subsystems, so all new drivers will utilize cleaned up headers
> of the pin control.
>
> Please, review and comment.
>
> Changelog v2:
> - added preparatory patches: all, but last (LKP)
> - added missed forward declaration to the last patch (LKP)
>

Thanks for doing this. Did you use any kind of automation for
detecting for which symbols the headers are missing?

Bart

[PATCH v2 36/36] pinctrl: Clean up headers

[Basavaraj Natikar]

On 10/11/2022 1:44 AM, Andy Shevchenko wrote:
> There is a few things done:
> - include only the headers we are direct user of
> - when pointer is in use, provide a forward declaration
> - add missed headers
> - group generic headers and subsystem headers
> - sort each group alphabetically
>
> While at it, fix some awkward indentations.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/core.c                  | 19 ++++++++-------
>  drivers/pinctrl/core.h                  | 12 +++++++++-
>  drivers/pinctrl/devicetree.h            |  6 +++++
>  drivers/pinctrl/pinconf.h               | 10 ++++++++
>  drivers/pinctrl/pinctrl-utils.h         |  5 ++++
>  drivers/pinctrl/pinmux.c                | 17 ++++++++------
>  drivers/pinctrl/pinmux.h                | 11 +++++++++
>  include/linux/pinctrl/consumer.h        | 31 +++++++++++--------------
>  include/linux/pinctrl/devinfo.h         |  6 +++--
>  include/linux/pinctrl/machine.h         |  8 ++++---
>  include/linux/pinctrl/pinconf-generic.h | 23 ++++++++++--------
>  include/linux/pinctrl/pinctrl.h         | 18 +++++++-------
>  include/linux/pinctrl/pinmux.h          |  5 ++--
>  13 files changed, 110 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
> index 9e57f4c62e60..655f9502e73f 100644
> --- a/drivers/pinctrl/core.c
> +++ b/drivers/pinctrl/core.c
> @@ -12,19 +12,21 @@
>   */
>  #define pr_fmt(fmt) "pinctrl core: " fmt
>  
> -#include <linux/kernel.h>
> -#include <linux/kref.h>
> -#include <linux/export.h>
> -#include <linux/init.h>
> +#include <linux/debugfs.h>
>  #include <linux/device.h>
> -#include <linux/slab.h>
>  #include <linux/err.h>
> +#include <linux/export.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/kref.h>
>  #include <linux/list.h>
> -#include <linux/debugfs.h>
>  #include <linux/seq_file.h>
> +#include <linux/slab.h>
> +
>  #include <linux/pinctrl/consumer.h>
> -#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/devinfo.h>
>  #include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinctrl.h>
>  
>  #ifdef CONFIG_GPIOLIB
>  #include "../gpio/gpiolib.h"
> @@ -33,9 +35,8 @@
>  
>  #include "core.h"
>  #include "devicetree.h"
> -#include "pinmux.h"
>  #include "pinconf.h"
> -
> +#include "pinmux.h"
>  
>  static bool pinctrl_dummy_state;
>  
> diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
> index 840103c40c14..4d0bdb9fb99b 100644
> --- a/drivers/pinctrl/core.h
> +++ b/drivers/pinctrl/core.h
> @@ -9,12 +9,22 @@
>   */
>  
>  #include <linux/kref.h>
> +#include <linux/list.h>
>  #include <linux/mutex.h>
>  #include <linux/radix-tree.h>
> -#include <linux/pinctrl/pinconf.h>

Removing pinconf.h from the core.h may cause build failure in other files
because where-ever core.h is included to use ?struct pinconf_ops?, there
is a need to include pinconf.h.

With that fixed,

Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

Thanks,
--
Basavaraj

> +#include <linux/types.h>
> +
>  #include <linux/pinctrl/machine.h>
>  
> +struct dentry;
> +struct device;
> +struct device_node;
> +struct module;
> +
> +struct pinctrl;
> +struct pinctrl_desc;
>  struct pinctrl_gpio_range;
> +struct pinctrl_state;
>  
>  /**
>   * struct pinctrl_dev - pin control class device
> diff --git a/drivers/pinctrl/devicetree.h b/drivers/pinctrl/devicetree.h
> index efa80779de4f..def76aba99d1 100644
> --- a/drivers/pinctrl/devicetree.h
> +++ b/drivers/pinctrl/devicetree.h
> @@ -5,8 +5,14 @@
>   * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
>   */
>  
> +#include <linux/errno.h>
> +
> +struct device_node;
>  struct of_phandle_args;
>  
> +struct pinctrl;
> +struct pinctrl_dev;
> +
>  #ifdef CONFIG_OF
>  
>  void pinctrl_dt_free_maps(struct pinctrl *p);
> diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
> index be7311373299..694bfc9961fa 100644
> --- a/drivers/pinctrl/pinconf.h
> +++ b/drivers/pinctrl/pinconf.h
> @@ -10,6 +10,16 @@
>   * Author: Linus Walleij <linus.walleij@linaro.org>
>   */
>  
> +#include <linux/errno.h>
> +
> +struct dentry;
> +struct device_node;
> +struct seq_file;
> +
> +struct pinctrl_dev;
> +struct pinctrl_map;
> +struct pinctrl_setting;
> +
>  #ifdef CONFIG_PINCONF
>  
>  int pinconf_check_ops(struct pinctrl_dev *pctldev);
> diff --git a/drivers/pinctrl/pinctrl-utils.h b/drivers/pinctrl/pinctrl-utils.h
> index cec407a8cc4e..4108ee2dd6d0 100644
> --- a/drivers/pinctrl/pinctrl-utils.h
> +++ b/drivers/pinctrl/pinctrl-utils.h
> @@ -9,6 +9,11 @@
>  #ifndef __PINCTRL_UTILS_H__
>  #define __PINCTRL_UTILS_H__
>  
> +#include <linux/pinctrl/machine.h>
> +
> +struct pinctrl_dev;
> +struct pinctrl_map;
> +
>  int pinctrl_utils_reserve_map(struct pinctrl_dev *pctldev,
>  		struct pinctrl_map **map, unsigned *reserved_maps,
>  		unsigned *num_maps, unsigned reserve);
> diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
> index f94d43b082d9..6bd7ac37a0e0 100644
> --- a/drivers/pinctrl/pinmux.c
> +++ b/drivers/pinctrl/pinmux.c
> @@ -13,19 +13,22 @@
>  #define pr_fmt(fmt) "pinmux core: " fmt
>  
>  #include <linux/ctype.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/init.h>
> +#include <linux/debugfs.h>
>  #include <linux/device.h>
> -#include <linux/slab.h>
> -#include <linux/radix-tree.h>
>  #include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
>  #include <linux/list.h>
> -#include <linux/string.h>
> -#include <linux/debugfs.h>
> +#include <linux/module.h>
> +#include <linux/radix-tree.h>
>  #include <linux/seq_file.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +
>  #include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> +
>  #include "core.h"
>  #include "pinmux.h"
>  
> diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h
> index 72fcf03eaa43..ea6f99c24aa5 100644
> --- a/drivers/pinctrl/pinmux.h
> +++ b/drivers/pinctrl/pinmux.h
> @@ -9,6 +9,17 @@
>   *
>   * Author: Linus Walleij <linus.walleij@linaro.org>
>   */
> +
> +#include <linux/types.h>
> +
> +struct dentry;
> +struct seq_file;
> +
> +struct pinctrl_dev;
> +struct pinctrl_gpio_range;
> +struct pinctrl_map;
> +struct pinctrl_setting;
> +
>  #ifdef CONFIG_PINMUX
>  
>  int pinmux_check_ops(struct pinctrl_dev *pctldev);
> diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
> index 019fecd75d0c..4729d54e8995 100644
> --- a/include/linux/pinctrl/consumer.h
> +++ b/include/linux/pinctrl/consumer.h
> @@ -12,14 +12,15 @@
>  #define __LINUX_PINCTRL_CONSUMER_H
>  
>  #include <linux/err.h>
> -#include <linux/list.h>
> -#include <linux/seq_file.h>
> +#include <linux/types.h>
> +
>  #include <linux/pinctrl/pinctrl-state.h>
>  
> +struct device;
> +
>  /* This struct is private to the core and should be regarded as a cookie */
>  struct pinctrl;
>  struct pinctrl_state;
> -struct device;
>  
>  #ifdef CONFIG_PINCTRL
>  
> @@ -33,9 +34,8 @@ extern int pinctrl_gpio_set_config(unsigned gpio, unsigned long config);
>  
>  extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
>  extern void pinctrl_put(struct pinctrl *p);
> -extern struct pinctrl_state * __must_check pinctrl_lookup_state(
> -							struct pinctrl *p,
> -							const char *name);
> +extern struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p,
> +								const char *name);
>  extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
>  
>  extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
> @@ -101,9 +101,8 @@ static inline void pinctrl_put(struct pinctrl *p)
>  {
>  }
>  
> -static inline struct pinctrl_state * __must_check pinctrl_lookup_state(
> -							struct pinctrl *p,
> -							const char *name)
> +static inline struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p,
> +								       const char *name)
>  {
>  	return NULL;
>  }
> @@ -145,8 +144,8 @@ static inline int pinctrl_pm_select_idle_state(struct device *dev)
>  
>  #endif /* CONFIG_PINCTRL */
>  
> -static inline struct pinctrl * __must_check pinctrl_get_select(
> -					struct device *dev, const char *name)
> +static inline struct pinctrl * __must_check pinctrl_get_select(struct device *dev,
> +							       const char *name)
>  {
>  	struct pinctrl *p;
>  	struct pinctrl_state *s;
> @@ -171,14 +170,13 @@ static inline struct pinctrl * __must_check pinctrl_get_select(
>  	return p;
>  }
>  
> -static inline struct pinctrl * __must_check pinctrl_get_select_default(
> -					struct device *dev)
> +static inline struct pinctrl * __must_check pinctrl_get_select_default(struct device *dev)
>  {
>  	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
>  }
>  
> -static inline struct pinctrl * __must_check devm_pinctrl_get_select(
> -					struct device *dev, const char *name)
> +static inline struct pinctrl * __must_check devm_pinctrl_get_select(struct device *dev,
> +								    const char *name)
>  {
>  	struct pinctrl *p;
>  	struct pinctrl_state *s;
> @@ -203,8 +201,7 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select(
>  	return p;
>  }
>  
> -static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
> -					struct device *dev)
> +static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(struct device *dev)
>  {
>  	return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
>  }
> diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
> index a48ff69acddd..9e8b559e1253 100644
> --- a/include/linux/pinctrl/devinfo.h
> +++ b/include/linux/pinctrl/devinfo.h
> @@ -14,11 +14,15 @@
>  #ifndef PINCTRL_DEVINFO_H
>  #define PINCTRL_DEVINFO_H
>  
> +struct device;
> +
>  #ifdef CONFIG_PINCTRL
>  
>  /* The device core acts as a consumer toward pinctrl */
>  #include <linux/pinctrl/consumer.h>
>  
> +struct pinctrl;
> +
>  /**
>   * struct dev_pin_info - pin state container for devices
>   * @p: pinctrl handle for the containing device
> @@ -42,8 +46,6 @@ extern int pinctrl_init_done(struct device *dev);
>  
>  #else
>  
> -struct device;
> -
>  /* Stubs if we're not using pinctrl */
>  
>  static inline int pinctrl_bind_pins(struct device *dev)
> diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
> index e987dc9fd2af..0639b36f43c5 100644
> --- a/include/linux/pinctrl/machine.h
> +++ b/include/linux/pinctrl/machine.h
> @@ -11,7 +11,7 @@
>  #ifndef __LINUX_PINCTRL_MACHINE_H
>  #define __LINUX_PINCTRL_MACHINE_H
>  
> -#include <linux/bug.h>
> +#include <linux/kernel.h>	/* ARRAY_SIZE() */
>  
>  #include <linux/pinctrl/pinctrl-state.h>
>  
> @@ -149,16 +149,18 @@ struct pinctrl_map {
>  #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
>  	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
>  
> +struct pinctrl_map;
> +
>  #ifdef CONFIG_PINCTRL
>  
>  extern int pinctrl_register_mappings(const struct pinctrl_map *map,
> -				unsigned num_maps);
> +				     unsigned num_maps);
>  extern void pinctrl_unregister_mappings(const struct pinctrl_map *map);
>  extern void pinctrl_provide_dummies(void);
>  #else
>  
>  static inline int pinctrl_register_mappings(const struct pinctrl_map *map,
> -					   unsigned num_maps)
> +					    unsigned num_maps)
>  {
>  	return 0;
>  }
> diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
> index 2422211d6a5a..940fc4e9e17c 100644
> --- a/include/linux/pinctrl/pinconf-generic.h
> +++ b/include/linux/pinctrl/pinconf-generic.h
> @@ -11,9 +11,12 @@
>  #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
>  #define __LINUX_PINCTRL_PINCONF_GENERIC_H
>  
> -#include <linux/device.h>
> +#include <linux/types.h>
> +
>  #include <linux/pinctrl/machine.h>
>  
> +struct device_node;
> +
>  struct pinctrl_dev;
>  struct pinctrl_map;
>  
> @@ -196,25 +199,25 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
>  void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev,
>  		struct pinctrl_map *map, unsigned num_maps);
>  
> -static inline int pinconf_generic_dt_node_to_map_group(
> -		struct pinctrl_dev *pctldev, struct device_node *np_config,
> -		struct pinctrl_map **map, unsigned *num_maps)
> +static inline int pinconf_generic_dt_node_to_map_group(struct pinctrl_dev *pctldev,
> +		struct device_node *np_config, struct pinctrl_map **map,
> +		unsigned *num_maps)
>  {
>  	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
>  			PIN_MAP_TYPE_CONFIGS_GROUP);
>  }
>  
> -static inline int pinconf_generic_dt_node_to_map_pin(
> -		struct pinctrl_dev *pctldev, struct device_node *np_config,
> -		struct pinctrl_map **map, unsigned *num_maps)
> +static inline int pinconf_generic_dt_node_to_map_pin(struct pinctrl_dev *pctldev,
> +		struct device_node *np_config, struct pinctrl_map **map,
> +		unsigned *num_maps)
>  {
>  	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
>  			PIN_MAP_TYPE_CONFIGS_PIN);
>  }
>  
> -static inline int pinconf_generic_dt_node_to_map_all(
> -		struct pinctrl_dev *pctldev, struct device_node *np_config,
> -		struct pinctrl_map **map, unsigned *num_maps)
> +static inline int pinconf_generic_dt_node_to_map_all(struct pinctrl_dev *pctldev,
> +		struct device_node *np_config, struct pinctrl_map **map,
> +		unsigned *num_maps)
>  {
>  	/*
>  	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
> diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
> index 487117ccb1bc..31fe992412f0 100644
> --- a/include/linux/pinctrl/pinctrl.h
> +++ b/include/linux/pinctrl/pinctrl.h
> @@ -11,20 +11,20 @@
>  #ifndef __LINUX_PINCTRL_PINCTRL_H
>  #define __LINUX_PINCTRL_PINCTRL_H
>  
> -#include <linux/radix-tree.h>
> -#include <linux/list.h>
> -#include <linux/seq_file.h>
> -#include <linux/pinctrl/pinctrl-state.h>
> -#include <linux/pinctrl/devinfo.h>
> +#include <linux/types.h>
>  
>  struct device;
> +struct device_node;
> +struct gpio_chip;
> +struct module;
> +struct seq_file;
> +
> +struct pin_config_item;
> +struct pinconf_generic_params;
> +struct pinconf_ops;
>  struct pinctrl_dev;
>  struct pinctrl_map;
>  struct pinmux_ops;
> -struct pinconf_ops;
> -struct pin_config_item;
> -struct gpio_chip;
> -struct device_node;
>  
>  /**
>   * struct pingroup - provides information on pingroup
> diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
> index 9a647fa5c8f1..a7e370965c53 100644
> --- a/include/linux/pinctrl/pinmux.h
> +++ b/include/linux/pinctrl/pinmux.h
> @@ -11,11 +11,10 @@
>  #ifndef __LINUX_PINCTRL_PINMUX_H
>  #define __LINUX_PINCTRL_PINMUX_H
>  
> -#include <linux/list.h>
> -#include <linux/seq_file.h>
> -#include <linux/pinctrl/pinctrl.h>
> +#include <linux/types.h>
>  
>  struct pinctrl_dev;
> +struct pinctrl_gpio_range;
>  
>  /**
>   * struct pinmux_ops - pinmux operations, to be implemented by pin controller

[PATCH v2 12/36] pinctrl: k210: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 1:33 AM Damien Le Moal <Damien.LeMoal@wdc.com> wrote:
> On 2022/10/11 5:15, Andy Shevchenko wrote:
> > Do not imply that some of the generic headers may be always included.
> > Instead, include explicitly what we are direct user of.
> >
> > While at it, sort headers alphabetically.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> Looks OK to me, but the patch title should be:
>
> pinctrl: k210: Add missing header(s)
>
> Same remark for the entire series. You need s/missed/missing in all patch titles.

Oh, the missing word 'missing' :-) I will replace it locally (I won't
resend it because of that).

> With that fixed,
>
> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Thanks!

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > -#include <linux/gpio.h>
> >  #include <linux/gpio/driver.h>
> > +#include <linux/gpio.h>
> > +#include <linux/hte.h>
>
> Ok with the hte re-order.
>
> But moving the gpio subsystem header after the gpio/driver is not
> alphabetical ('.' precedes '/') and it read better and made more sense
> to me the way it was.

I see, I guess this is vim sort vs shell sort. Strange, they should
follow the locale settings...

...

> > +#include <linux/seq_file.h>
>
> I wasn't aware that we use anything from seq_file.
> What am I missing?

I will recheck, because in v6.0 I don't see anything, but LKP was not
okay with something IIRC.




--
With Best Regards,
Andy Shevchenko

[PATCH v2 19/36] pinctrl: renesas: Add missed header(s)

[Geert Uytterhoeven]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 25/36] pinctrl: starfive: Add missed header(s)

[Emil Renner Berthing]

On Mon, 10 Oct 2022 at 22:26, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.

The patch is fine, but I don't see any sorting other than just adding
the headers at the appropriate place.
In any case

Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
> index 5b544fb7f3d8..6a8a9cfe8965 100644
> --- a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
> +++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c
> @@ -15,8 +15,10 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
> +#include <linux/seq_file.h>
>  #include <linux/spinlock.h>
>
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
>
> --
> 2.35.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v2 36/36] pinctrl: Clean up headers

[Geert Uytterhoeven]

On Tue, Oct 11, 2022 at 9:31 AM Basavaraj Natikar <bnatikar@amd.com> wrote:
> On 10/11/2022 1:44 AM, Andy Shevchenko wrote:
> > There is a few things done:
> > - include only the headers we are direct user of
> > - when pointer is in use, provide a forward declaration
> > - add missed headers
> > - group generic headers and subsystem headers
> > - sort each group alphabetically
> >
> > While at it, fix some awkward indentations.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >  drivers/pinctrl/core.c                  | 19 ++++++++-------
> >  drivers/pinctrl/core.h                  | 12 +++++++++-
> >  drivers/pinctrl/devicetree.h            |  6 +++++
> >  drivers/pinctrl/pinconf.h               | 10 ++++++++
> >  drivers/pinctrl/pinctrl-utils.h         |  5 ++++
> >  drivers/pinctrl/pinmux.c                | 17 ++++++++------
> >  drivers/pinctrl/pinmux.h                | 11 +++++++++
> >  include/linux/pinctrl/consumer.h        | 31 +++++++++++--------------
> >  include/linux/pinctrl/devinfo.h         |  6 +++--
> >  include/linux/pinctrl/machine.h         |  8 ++++---
> >  include/linux/pinctrl/pinconf-generic.h | 23 ++++++++++--------
> >  include/linux/pinctrl/pinctrl.h         | 18 +++++++-------
> >  include/linux/pinctrl/pinmux.h          |  5 ++--
> >  13 files changed, 110 insertions(+), 61 deletions(-)
> >
> > diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
> > index 9e57f4c62e60..655f9502e73f 100644
> > --- a/drivers/pinctrl/core.c
> > +++ b/drivers/pinctrl/core.c
> > @@ -12,19 +12,21 @@
> >   */
> >  #define pr_fmt(fmt) "pinctrl core: " fmt
> >
> > -#include <linux/kernel.h>
> > -#include <linux/kref.h>
> > -#include <linux/export.h>
> > -#include <linux/init.h>
> > +#include <linux/debugfs.h>
> >  #include <linux/device.h>
> > -#include <linux/slab.h>
> >  #include <linux/err.h>
> > +#include <linux/export.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/kref.h>
> >  #include <linux/list.h>
> > -#include <linux/debugfs.h>
> >  #include <linux/seq_file.h>
> > +#include <linux/slab.h>
> > +
> >  #include <linux/pinctrl/consumer.h>
> > -#include <linux/pinctrl/pinctrl.h>
> > +#include <linux/pinctrl/devinfo.h>
> >  #include <linux/pinctrl/machine.h>
> > +#include <linux/pinctrl/pinctrl.h>
> >
> >  #ifdef CONFIG_GPIOLIB
> >  #include "../gpio/gpiolib.h"
> > @@ -33,9 +35,8 @@
> >
> >  #include "core.h"
> >  #include "devicetree.h"
> > -#include "pinmux.h"
> >  #include "pinconf.h"
> > -
> > +#include "pinmux.h"
> >
> >  static bool pinctrl_dummy_state;
> >
> > diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
> > index 840103c40c14..4d0bdb9fb99b 100644
> > --- a/drivers/pinctrl/core.h
> > +++ b/drivers/pinctrl/core.h
> > @@ -9,12 +9,22 @@
> >   */
> >
> >  #include <linux/kref.h>
> > +#include <linux/list.h>
> >  #include <linux/mutex.h>
> >  #include <linux/radix-tree.h>
> > -#include <linux/pinctrl/pinconf.h>
>
> Removing pinconf.h from the core.h may cause build failure in other files
> because where-ever core.h is included to use ?struct pinconf_ops?, there
> is a need to include pinconf.h.

I can confirm adding

    #include <linux/pinctrl/pinconf.h>

to drivers/pinctrl/renesas/pinctrl-rzn1.c and drivers/pinctrl/pinctrl-single.c
fixes the issues I was seeing with shmobile_defconfig and (out-of-tree)
renesas_defconfig.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 09:10:07AM +0200, Bartosz Golaszewski wrote:
> On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> >
> > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > than logical. This series is basically out of two parts:
> > - add missed headers to the pin control drivers / users
> > - clean up the headers of pin control subsystem
> >
> > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > pin control subsystems, so all new drivers will utilize cleaned up headers
> > of the pin control.
> >
> > Please, review and comment.
> >
> > Changelog v2:
> > - added preparatory patches: all, but last (LKP)
> > - added missed forward declaration to the last patch (LKP)
> 
> Thanks for doing this.

You're welcome!

> Did you use any kind of automation for
> detecting for which symbols the headers are missing?

No, it's manual + what CI(s) reported back to me, that's why even in this
series I have got a few compile breakages. I have very limited compile-testing
cycle.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 13/36] pinctrl: lochnagar: Add missed header(s)

[Charles Keepax]

On Mon, Oct 10, 2022 at 11:14:29PM +0300, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles

[PATCH v2 36/36] pinctrl: Clean up headers

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 01:00:11PM +0530, Basavaraj Natikar wrote:
> On 10/11/2022 1:44 AM, Andy Shevchenko wrote:

...

> > --- a/drivers/pinctrl/core.h
> > +++ b/drivers/pinctrl/core.h

> > -#include <linux/pinctrl/pinconf.h>
> 
> Removing pinconf.h from the core.h may cause build failure in other files
> because where-ever core.h is included to use ?struct pinconf_ops?, there
> is a need to include pinconf.h.

Yes, I compiled only few drivers with the core changes. Still I got a few
reports by LKP. Thank you for spotting this!

> With that fixed,
> 
> Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

Thank you!

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 25/36] pinctrl: starfive: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 10:31:33AM +0200, Emil Renner Berthing wrote:
> On Mon, 10 Oct 2022 at 22:26, Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> >
> > Do not imply that some of the generic headers may be always included.
> > Instead, include explicitly what we are direct user of.
> >
> > While at it, sort headers alphabetically.
> 
> The patch is fine, but I don't see any sorting other than just adding
> the headers at the appropriate place.

I will amend commit message here.

> In any case
> 
> Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Thank you!

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 36/36] pinctrl: Clean up headers

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 10:46:30AM +0200, Geert Uytterhoeven wrote:
> On Tue, Oct 11, 2022 at 9:31 AM Basavaraj Natikar <bnatikar@amd.com> wrote:
> > On 10/11/2022 1:44 AM, Andy Shevchenko wrote:

> > > +++ b/drivers/pinctrl/core.h

> > > -#include <linux/pinctrl/pinconf.h>
> >
> > Removing pinconf.h from the core.h may cause build failure in other files
> > because where-ever core.h is included to use ?struct pinconf_ops?, there
> > is a need to include pinconf.h.
> 
> I can confirm adding
> 
>     #include <linux/pinctrl/pinconf.h>
> 
> to drivers/pinctrl/renesas/pinctrl-rzn1.c and drivers/pinctrl/pinctrl-single.c
> fixes the issues I was seeing with shmobile_defconfig and (out-of-tree)
> renesas_defconfig.

I will add this, thank you for reporting.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 17/36] pinctrl: ocelot: Add missed header(s)

[Horatiu Vultur]

The 10/10/2022 23:14, Andy Shevchenko wrote:
> 
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---

Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>

>  drivers/pinctrl/pinctrl-ocelot.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
> index 647e91490bac..a9343c242cd5 100644
> --- a/drivers/pinctrl/pinctrl-ocelot.c
> +++ b/drivers/pinctrl/pinctrl-ocelot.c
> @@ -13,15 +13,17 @@
>  #include <linux/of_device.h>
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
> -#include <linux/pinctrl/pinctrl.h>
> -#include <linux/pinctrl/pinmux.h>
> -#include <linux/pinctrl/pinconf.h>
> -#include <linux/pinctrl/pinconf-generic.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/reset.h>
>  #include <linux/slab.h>
> 
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
>  #include "core.h"
>  #include "pinconf.h"
>  #include "pinmux.h"
> --
> 2.35.1
> 

-- 
/Horatiu

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > -#include <linux/gpio.h>
> > >  #include <linux/gpio/driver.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/hte.h>
> >
> > Ok with the hte re-order.
> >
> > But moving the gpio subsystem header after the gpio/driver is not
> > alphabetical ('.' precedes '/') and it read better and made more sense
> > to me the way it was.
> 
> I see, I guess this is vim sort vs shell sort. Strange, they should
> follow the locale settings...

I have checked, the shell and vim sort gave the same result as in this patch.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Kent Gibson]

On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
> 
> ...
> 
> > > > -#include <linux/gpio.h>
> > > >  #include <linux/gpio/driver.h>
> > > > +#include <linux/gpio.h>
> > > > +#include <linux/hte.h>
> > >
> > > Ok with the hte re-order.
> > >
> > > But moving the gpio subsystem header after the gpio/driver is not
> > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > to me the way it was.
> > 
> > I see, I guess this is vim sort vs shell sort. Strange, they should
> > follow the locale settings...
> 
> I have checked, the shell and vim sort gave the same result as in this patch.
> 

The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
and that still returns the same result.  That matches what I would
expect to see given the content of the text.

And for me vim also gives the original order.

Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?

Cheers,
Kent.

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > > > -#include <linux/gpio.h>
> > > > >  #include <linux/gpio/driver.h>
> > > > > +#include <linux/gpio.h>
> > > > > +#include <linux/hte.h>
> > > >
> > > > Ok with the hte re-order.
> > > >
> > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > to me the way it was.
> > > 
> > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > follow the locale settings...
> > 
> > I have checked, the shell and vim sort gave the same result as in this patch.
> > 
> 
> The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> and that still returns the same result.  That matches what I would
> expect to see given the content of the text.
> 
> And for me vim also gives the original order.
> 
> Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?

$ LC_COLLATE=C sort test1.txt
#include <linux/gpio.h>
#include <linux/gpio/driver.h>

$ LC_COLLATE= sort test1.txt
#include <linux/gpio/driver.h>
#include <linux/gpio.h>

I guess this explains the difference. Currently I have en_US.UTF-8.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Geert Uytterhoeven]

Hi Andy,

On Tue, Oct 11, 2022 at 4:31 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> > On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
>
> ...
>
> > > > > > -#include <linux/gpio.h>
> > > > > >  #include <linux/gpio/driver.h>
> > > > > > +#include <linux/gpio.h>
> > > > > > +#include <linux/hte.h>
> > > > >
> > > > > Ok with the hte re-order.
> > > > >
> > > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > > to me the way it was.
> > > >
> > > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > > follow the locale settings...
> > >
> > > I have checked, the shell and vim sort gave the same result as in this patch.
> > >
> >
> > The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> > and that still returns the same result.  That matches what I would
> > expect to see given the content of the text.
> >
> > And for me vim also gives the original order.
> >
> > Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?
>
> $ LC_COLLATE=C sort test1.txt
> #include <linux/gpio.h>
> #include <linux/gpio/driver.h>
>
> $ LC_COLLATE= sort test1.txt
> #include <linux/gpio/driver.h>
> #include <linux/gpio.h>
>
> I guess this explains the difference. Currently I have en_US.UTF-8.

Throwing my can of paint into the mix...

I think it is more logical to first include the general <linux/gpio.h>,
followed by whatever <linux/gpio-foo.h> and <linux/gpio/bar.h>,
irrespective of (language-specific or phonebook) sort order.

Yeah, it sucks that this requires some manual work after running sort...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 14/36] pinctrl: mediatek: Add missed header(s)

[AngeloGioacchino Del Regno]

Il 10/10/22 22:14, Andy Shevchenko ha scritto:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>   drivers/pinctrl/mediatek/pinctrl-moore.c | 3 +++
>   drivers/pinctrl/mediatek/pinctrl-paris.c | 5 +++++
>   2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c
> index 526faaebaf77..9474ada5addb 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-moore.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
> @@ -9,6 +9,9 @@
>    */
>   
>   #include <linux/gpio/driver.h>
> +

Apart from this blank line that I deem unnecessary....

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 04:39:46PM +0200, Geert Uytterhoeven wrote:
> On Tue, Oct 11, 2022 at 4:31 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Tue, Oct 11, 2022 at 10:13:02PM +0800, Kent Gibson wrote:
> > > On Tue, Oct 11, 2022 at 04:48:17PM +0300, Andy Shevchenko wrote:
> > > > On Tue, Oct 11, 2022 at 11:05:42AM +0300, Andy Shevchenko wrote:
> > > > > On Tue, Oct 11, 2022 at 3:02 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > > > > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > > > > > > -#include <linux/gpio.h>
> > > > > > >  #include <linux/gpio/driver.h>
> > > > > > > +#include <linux/gpio.h>
> > > > > > > +#include <linux/hte.h>
> > > > > >
> > > > > > Ok with the hte re-order.
> > > > > >
> > > > > > But moving the gpio subsystem header after the gpio/driver is not
> > > > > > alphabetical ('.' precedes '/') and it read better and made more sense
> > > > > > to me the way it was.
> > > > >
> > > > > I see, I guess this is vim sort vs shell sort. Strange, they should
> > > > > follow the locale settings...
> > > >
> > > > I have checked, the shell and vim sort gave the same result as in this patch.
> > > >
> > >
> > > The original order (sans hte.h) was done by VSCode Sort Lines Ascending,
> > > and that still returns the same result.  That matches what I would
> > > expect to see given the content of the text.
> > >
> > > And for me vim also gives the original order.
> > >
> > > Just to confirm - is '.' 0x2e and '/' 0x2f in your universe?
> >
> > $ LC_COLLATE=C sort test1.txt
> > #include <linux/gpio.h>
> > #include <linux/gpio/driver.h>
> >
> > $ LC_COLLATE= sort test1.txt
> > #include <linux/gpio/driver.h>
> > #include <linux/gpio.h>
> >
> > I guess this explains the difference. Currently I have en_US.UTF-8.
> 
> Throwing my can of paint into the mix...
> 
> I think it is more logical to first include the general <linux/gpio.h>,
> followed by whatever <linux/gpio-foo.h> and <linux/gpio/bar.h>,
> irrespective of (language-specific or phonebook) sort order.
> 
> Yeah, it sucks that this requires some manual work after running sort...

It seems that kind of issue is in this patch only.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 06:19:13PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 04:39:46PM +0200, Geert Uytterhoeven wrote:

...

After all this patch is not needed. However, during checking of the necessity
of this patch I realized that seq_file is used in a few GPIO drivers without
any actual users, so I will prepare clean up series for that as well.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 20/36] pinctrl: samsung: Add missed header(s)

[Krzysztof Kozlowski]

On 10/10/2022 16:14, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-samsung.c | 11 ++++++-----


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v2 07/36] pinctrl: axp209: Add missed header(s)

[Chen-Yu Tsai]

On Tue, Oct 11, 2022 at 4:16 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Florian Fainelli]

On 10/10/2022 1:14 PM, Andy Shevchenko wrote:
> Currently the header inclusion inside the pinctrl headers seems more arbitrary
> than logical. This series is basically out of two parts:
> - add missed headers to the pin control drivers / users
> - clean up the headers of pin control subsystem
> 
> The idea is to have this series to be pulled after -rc1 by the GPIO and
> pin control subsystems, so all new drivers will utilize cleaned up headers
> of the pin control.
> 
> Please, review and comment.

Did you really need to split this on a per-driver basis as opposed to 
just a treewide drivers/pinctrl, drivers/media and drivers/gpiolib patch 
set?

36 patches seems needlessly high when 4 patches could have achieve the 
same outcome.
-- 
Florian

[PATCH v2 06/36] pinctrl: at91: Add missed header(s)

[Claudiu.Beznea]

On 10.10.2022 23:14, Andy Shevchenko wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> ---
>  drivers/pinctrl/pinctrl-at91-pio4.c | 10 +++++++---
>  drivers/pinctrl/pinctrl-at91.c      | 16 +++++++++-------
>  2 files changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index 82b921fd630d..e38c683aba09 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -7,18 +7,22 @@
>   */
> 
>  #include <dt-bindings/pinctrl/at91.h>
> +
>  #include <linux/clk.h>
>  #include <linux/gpio/driver.h>
> +#include <linux/init.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/init.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> -#include <linux/pinctrl/pinconf.h>
> +#include <linux/seq_file.h>
> +#include <linux/slab.h>
> +
>  #include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> -#include <linux/slab.h>
> +
>  #include "core.h"
>  #include "pinconf.h"
>  #include "pinctrl-utils.h"
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 81dbffab621f..1e1813d7c550 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -7,22 +7,24 @@
> 
>  #include <linux/clk.h>
>  #include <linux/err.h>
> +#include <linux/gpio/driver.h>
>  #include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
>  #include <linux/of.h>
> -#include <linux/of_device.h>
>  #include <linux/of_address.h>
> +#include <linux/of_device.h>
>  #include <linux/of_irq.h>
> +#include <linux/pm.h>
> +#include <linux/seq_file.h>
>  #include <linux/slab.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/gpio/driver.h>
> +
> +/* Since we request GPIOs from ourself */
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/machine.h>
>  #include <linux/pinctrl/pinconf.h>
>  #include <linux/pinctrl/pinctrl.h>
>  #include <linux/pinctrl/pinmux.h>
> -/* Since we request GPIOs from ourself */
> -#include <linux/pinctrl/consumer.h>
> -#include <linux/pm.h>
> 
>  #include "pinctrl-at91.h"
>  #include "core.h"
> --
> 2.35.1
> 

[PATCH v2 11/36] pinctrl: ingenic: Add missed header(s)

[Paul Cercueil]

Le lun., oct. 10 2022 at 23:14:27 +0300, Andy Shevchenko 
<andriy.shevchenko@linux.intel.com> a ?crit :
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

> ---
>  drivers/pinctrl/pinctrl-ingenic.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-ingenic.c 
> b/drivers/pinctrl/pinctrl-ingenic.c
> index 7e732076dedf..dbc25a60fbff 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -14,16 +14,18 @@
>  #include <linux/kernel.h>
>  #include <linux/mod_devicetable.h>
>  #include <linux/of.h>
> -#include <linux/pinctrl/pinctrl.h>
> -#include <linux/pinctrl/pinmux.h>
> -#include <linux/pinctrl/pinconf.h>
> -#include <linux/pinctrl/pinconf-generic.h>
>  #include <linux/platform_device.h>
>  #include <linux/property.h>
>  #include <linux/regmap.h>
>  #include <linux/seq_file.h>
>  #include <linux/slab.h>
> 
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
>  #include "core.h"
>  #include "pinconf.h"
>  #include "pinmux.h"
> --
> 2.35.1
> 

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 11:56 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 10/10/2022 1:14 PM, Andy Shevchenko wrote:
> > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > than logical. This series is basically out of two parts:
> > - add missed headers to the pin control drivers / users
> > - clean up the headers of pin control subsystem
> >
> > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > pin control subsystems, so all new drivers will utilize cleaned up headers
> > of the pin control.
> >
> > Please, review and comment.
>
> Did you really need to split this on a per-driver basis as opposed to
> just a treewide drivers/pinctrl, drivers/media and drivers/gpiolib patch
> set?
>
> 36 patches seems needlessly high when 4 patches could have achieve the
> same outcome.

I can combine them if maintainers ask for that, nevertheless for Intel
pin control and GPIO drivers, which I care more about, I would like to
leave as separate changes (easy to see in history what was done).


-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Andy Shevchenko]

On Tue, Oct 11, 2022 at 08:01:27AM +0800, Kent Gibson wrote:
> On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:

...

> > -#include <linux/gpio.h>
> >  #include <linux/gpio/driver.h>
> > +#include <linux/gpio.h>

> But moving the gpio subsystem header after the gpio/driver is not
> alphabetical ('.' precedes '/') and it read better and made more sense
> to me the way it was.

Okay, I will move it back.

...

> > +#include <linux/seq_file.h>
> 
> I wasn't aware that we use anything from seq_file.
> What am I missing?


Eventually I can answer to your question: the commit 0ae3109a8391
("gpiolib: cdev: add fdinfo output for line request file descriptors")
is what you are missing.

That said, we need this patch.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 02/36] gpiolib: cdev: Add missed header(s)

[Kent Gibson]

On Wed, Oct 12, 2022 at 04:30:05PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 08:01:27AM +0800, Kent Gibson wrote:
> > On Mon, Oct 10, 2022 at 11:14:18PM +0300, Andy Shevchenko wrote:
> 
> ...
> 
> > > -#include <linux/gpio.h>
> > >  #include <linux/gpio/driver.h>
> > > +#include <linux/gpio.h>
> 
> > But moving the gpio subsystem header after the gpio/driver is not
> > alphabetical ('.' precedes '/') and it read better and made more sense
> > to me the way it was.
> 
> Okay, I will move it back.
> 
> ...
> 
> > > +#include <linux/seq_file.h>
> > 
> > I wasn't aware that we use anything from seq_file.
> > What am I missing?
> 
> 
> Eventually I can answer to your question: the commit 0ae3109a8391
> ("gpiolib: cdev: add fdinfo output for line request file descriptors")
> is what you are missing.
> 
> That said, we need this patch.
> 

Ah, yes - totally forgot that one is in flight.
That makes sense then.

With the gpio headers retaining their original order:

Rewiewed-by: Kent Gibson <warthog618@gmail.com>

> -- 
> With Best Regards,
> Andy Shevchenko
> 
> 

[PATCH v2 23/36] pinctrl: sprd: Add missed header(s)

[Baolin Wang]

On 10/11/2022 4:14 AM, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

LGTM. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>

> ---
>   drivers/pinctrl/sprd/pinctrl-sprd.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
> index dca7a505d413..c1806b7dcf78 100644
> --- a/drivers/pinctrl/sprd/pinctrl-sprd.c
> +++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
> @@ -13,12 +13,14 @@
>   #include <linux/of.h>
>   #include <linux/of_device.h>
>   #include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <linux/pinctrl/consumer.h>
>   #include <linux/pinctrl/machine.h>
> -#include <linux/pinctrl/pinconf.h>
>   #include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
>   #include <linux/pinctrl/pinctrl.h>
>   #include <linux/pinctrl/pinmux.h>
> -#include <linux/slab.h>
>   
>   #include "../core.h"
>   #include "../pinmux.h"

[PATCH v2 35/36] pinctrl: intel: Add missed header(s)

[Mika Westerberg]

On Mon, Oct 10, 2022 at 11:14:51PM +0300, Andy Shevchenko wrote:
> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
> 
> While at it, sort headers alphabetically.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For all the intel pinctrl changes.

[PATCH v2 35/36] pinctrl: intel: Add missed header(s)

[Andy Shevchenko]

On Thu, Oct 13, 2022 at 05:53:31PM +0300, Mika Westerberg wrote:
> On Mon, Oct 10, 2022 at 11:14:51PM +0300, Andy Shevchenko wrote:
> > Do not imply that some of the generic headers may be always included.
> > Instead, include explicitly what we are direct user of.
> > 
> > While at it, sort headers alphabetically.
> > 
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> 
> For all the intel pinctrl changes.

Thank you, I have added it to the 4 Intel related patches.

-- 
With Best Regards,
Andy Shevchenko

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

On Wed, Oct 12, 2022 at 01:04:10PM +0300, Andy Shevchenko wrote:
> On Tue, Oct 11, 2022 at 11:56 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> > On 10/10/2022 1:14 PM, Andy Shevchenko wrote:
> > > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > > than logical. This series is basically out of two parts:
> > > - add missed headers to the pin control drivers / users
> > > - clean up the headers of pin control subsystem
> > >
> > > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > > pin control subsystems, so all new drivers will utilize cleaned up headers
> > > of the pin control.
> > >
> > > Please, review and comment.
> >
> > Did you really need to split this on a per-driver basis as opposed to
> > just a treewide drivers/pinctrl, drivers/media and drivers/gpiolib patch
> > set?
> >
> > 36 patches seems needlessly high when 4 patches could have achieve the
> > same outcome.
> 
> I can combine them if maintainers ask for that, nevertheless for Intel
> pin control and GPIO drivers, which I care more about, I would like to
> leave as separate changes (easy to see in history what was done).

I can now tell why I don't like to combine. While doing a revert (it's not
related to GPIO nor to pin control), it appears that I reverted extra bits
as merge conflict resolution. This is per se is not an issue, but when
I tried to find and reapply that missed piece I can't, because the patch
is combined and Git simply ignores to have
`git cherry-pick _something in the past_` done.

But again, up to maintainers.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 01/36] gpiolib: tegra186: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 04/36] pinctrl: actions: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 05/36] pinctrl: aspeed: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied.

Yours,
Linus Walleij

[PATCH v2 06/36] pinctrl: at91: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 07/36] pinctrl: axp209: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 08/36] pinctrl: bcm: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 09/36] pinctrl: cygnus-mux: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 10/36] pinctrl: imx: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[PATCH v2 11/36] pinctrl: ingenic: Add missed header(s)

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Do not imply that some of the generic headers may be always included.
> Instead, include explicitly what we are direct user of.
>
> While at it, sort headers alphabetically.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Patch applied!

Yours,
Linus Walleij

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Linus Walleij]

On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> Currently the header inclusion inside the pinctrl headers seems more arbitrary
> than logical. This series is basically out of two parts:
> - add missed headers to the pin control drivers / users
> - clean up the headers of pin control subsystem
>
> The idea is to have this series to be pulled after -rc1 by the GPIO and
> pin control subsystems, so all new drivers will utilize cleaned up headers
> of the pin control.

Aha I see you want to send a pull request so I backed out the applied patches
from the series for now.

Yours,
Linus Walleij

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

On Mon, Oct 17, 2022 at 11:02:09AM +0200, Linus Walleij wrote:
> On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> 
> > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > than logical. This series is basically out of two parts:
> > - add missed headers to the pin control drivers / users
> > - clean up the headers of pin control subsystem
> >
> > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > pin control subsystems, so all new drivers will utilize cleaned up headers
> > of the pin control.
> 
> Aha I see you want to send a pull request so I backed out the applied patches
> from the series for now.

Can I consider all that you answered to as Rb tag?

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 01/36] gpiolib: tegra186: Add missed header(s)

[Bartosz Golaszewski]

On Mon, Oct 17, 2022 at 10:52 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
>
> > Do not imply that some of the generic headers may be always included.
> > Instead, include explicitly what we are direct user of.
> >
> > While at it, sort headers alphabetically.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> Yours,
> Linus Walleij

Andy: are you going to send it together with the corresponding pinctrl
changes in a separate PR?

Bart

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Linus Walleij]

On Mon, Oct 17, 2022 at 11:27 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> On Mon, Oct 17, 2022 at 11:02:09AM +0200, Linus Walleij wrote:
> > On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> > <andriy.shevchenko@linux.intel.com> wrote:
> >
> > > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > > than logical. This series is basically out of two parts:
> > > - add missed headers to the pin control drivers / users
> > > - clean up the headers of pin control subsystem
> > >
> > > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > > pin control subsystems, so all new drivers will utilize cleaned up headers
> > > of the pin control.
> >
> > Aha I see you want to send a pull request so I backed out the applied patches
> > from the series for now.
>
> Can I consider all that you answered to as Rb tag?

Acked-by: Linus Walleij <linus.walleij@linaro.org>

I haven't reviewed in detail but I fully trust you to do the right thing
and fix any fallout so will happily pull this.

Yours,
Linus Walleij

[PATCH v2 01/36] gpiolib: tegra186: Add missed header(s)

[Andy Shevchenko]

On Mon, Oct 17, 2022 at 12:35 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> On Mon, Oct 17, 2022 at 10:52 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>>?On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> > <andriy.shevchenko@linux.intel.com> wrote:
> >
> > > Do not imply that some of the generic headers may be always included.
> > > Instead, include explicitly what we are direct user of.
> > >
> > > While at it, sort headers alphabetically.
> > >
> > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> >
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

> Andy: are you going to send it together with the corresponding pinctrl
> changes in a separate PR?

Yes, this is the plan, but I want first to push it to Linux Next (via
my tree) for a couple of days, so we will be sure there are no
compilation issues.

-- 
With Best Regards,
Andy Shevchenko

[rft, PATCH v2 00/36] pinctrl: Clean up and add missed headers

[Andy Shevchenko]

On Mon, Oct 17, 2022 at 11:58:03AM +0200, Linus Walleij wrote:
> On Mon, Oct 17, 2022 at 11:27 AM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Mon, Oct 17, 2022 at 11:02:09AM +0200, Linus Walleij wrote:
> > > On Mon, Oct 10, 2022 at 10:15 PM Andy Shevchenko
> > > <andriy.shevchenko@linux.intel.com> wrote:
> > >
> > > > Currently the header inclusion inside the pinctrl headers seems more arbitrary
> > > > than logical. This series is basically out of two parts:
> > > > - add missed headers to the pin control drivers / users
> > > > - clean up the headers of pin control subsystem
> > > >
> > > > The idea is to have this series to be pulled after -rc1 by the GPIO and
> > > > pin control subsystems, so all new drivers will utilize cleaned up headers
> > > > of the pin control.
> > >
> > > Aha I see you want to send a pull request so I backed out the applied patches
> > > from the series for now.
> >
> > Can I consider all that you answered to as Rb tag?
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thank you!

> I haven't reviewed in detail but I fully trust you to do the right thing
> and fix any fallout so will happily pull this.

The plan is to push this to Linux Next for a couple of days and then I'll send
PR to you and Bart.

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 36/36] pinctrl: Clean up headers

[Geert Uytterhoeven]

Hi Andy,

On Tue, Oct 11, 2022 at 11:07 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> On Tue, Oct 11, 2022 at 10:46:30AM +0200, Geert Uytterhoeven wrote:
> > On Tue, Oct 11, 2022 at 9:31 AM Basavaraj Natikar <bnatikar@amd.com> wrote:
> > > On 10/11/2022 1:44 AM, Andy Shevchenko wrote:
>
> > > > +++ b/drivers/pinctrl/core.h
>
> > > > -#include <linux/pinctrl/pinconf.h>
> > >
> > > Removing pinconf.h from the core.h may cause build failure in other files
> > > because where-ever core.h is included to use ?struct pinconf_ops?, there
> > > is a need to include pinconf.h.
> >
> > I can confirm adding
> >
> >     #include <linux/pinctrl/pinconf.h>
> >
> > to drivers/pinctrl/renesas/pinctrl-rzn1.c and drivers/pinctrl/pinctrl-single.c
> > fixes the issues I was seeing with shmobile_defconfig and (out-of-tree)
> > renesas_defconfig.
>
> I will add this, thank you for reporting.

Same for drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v2 36/36] pinctrl: Clean up headers

[Andy Shevchenko]

On Tue, Oct 18, 2022 at 03:04:44PM +0200, Geert Uytterhoeven wrote:
> On Tue, Oct 11, 2022 at 11:07 AM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Tue, Oct 11, 2022 at 10:46:30AM +0200, Geert Uytterhoeven wrote:
> > > On Tue, Oct 11, 2022 at 9:31 AM Basavaraj Natikar <bnatikar@amd.com> wrote:

...

> > > I can confirm adding
> > >
> > >     #include <linux/pinctrl/pinconf.h>
> > >
> > > to drivers/pinctrl/renesas/pinctrl-rzn1.c and drivers/pinctrl/pinctrl-single.c
> > > fixes the issues I was seeing with shmobile_defconfig and (out-of-tree)
> > > renesas_defconfig.
> >
> > I will add this, thank you for reporting.
> 
> Same for drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c.

Thanks!

Not only. I have updated all of them (but missed zynq (it is in today's Linux
Next).

-- 
With Best Regards,
Andy Shevchenko