From mboxrd@z Thu Jan 1 00:00:00 1970 From: Li Zetao Date: Tue, 22 Aug 2023 21:12:21 +0800 Subject: [PATCH -next 09/25] spi: spi-cavium-thunderx: Use helper function devm_clk_get_enabled() In-Reply-To: <20230822131237.1022815-1-lizetao1@huawei.com> References: <20230822131237.1022815-1-lizetao1@huawei.com> Message-ID: <20230822131237.1022815-10-lizetao1@huawei.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be replaced by devm_clk_get_enabled() when driver enables (and possibly prepares) the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare and disable the clocks explicitly. Signed-off-by: Li Zetao --- drivers/spi/spi-cavium-thunderx.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c index f7c378a5f1bc..337aef12abcc 100644 --- a/drivers/spi/spi-cavium-thunderx.c +++ b/drivers/spi/spi-cavium-thunderx.c @@ -49,16 +49,12 @@ static int thunderx_spi_probe(struct pci_dev *pdev, p->regs.tx = 0x1010; p->regs.data = 0x1080; - p->clk = devm_clk_get(dev, NULL); + p->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(p->clk)) { ret = PTR_ERR(p->clk); goto error; } - ret = clk_prepare_enable(p->clk); - if (ret) - goto error; - p->sys_freq = clk_get_rate(p->clk); if (!p->sys_freq) p->sys_freq = SYS_FREQ_DEFAULT; @@ -82,7 +78,6 @@ static int thunderx_spi_probe(struct pci_dev *pdev, return 0; error: - clk_disable_unprepare(p->clk); pci_release_regions(pdev); spi_controller_put(host); return ret; @@ -97,7 +92,6 @@ static void thunderx_spi_remove(struct pci_dev *pdev) if (!p) return; - clk_disable_unprepare(p->clk); pci_release_regions(pdev); /* Put everything in a known state. */ writeq(0, p->register_base + OCTEON_SPI_CFG(p)); -- 2.34.1