From: Renze Nicolai <renze@rnplus.nl>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v2 0/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
Date: Wed, 29 Nov 2023 00:23:15 +0100 [thread overview]
Message-ID: <20231128232456.2932350-1-renze@rnplus.nl> (raw)
Hello,
These patches add a device-tree (and a bindings update) for the
Aspeed BMC on the ASRock X570D4U, so that it can be added as a
supported OpenBMC platform.
Changes since v1:
- Fixed indentation
- Added "aspeed,ast2500" compatible
- Switched to lower case hex values
- Added function and color attributes to the LEDs
- Renamed LEDs to led0 and led1
- Removed hogging of output-bmc-ready GPIO (should be set from userland instead)
- Get MAC addresses of the ethernet interfaces from the FRU EEPROM
- Add descriptions to the busses exposed by the I2C switch (i2c-1 at 70)
- Add blank lines between nodes in fan section
- Drop bootargs from chosen section
Greetings,
Renze Nicolai
Renze Nicolai (2):
dt-bindings: arm: aspeed: add Asrock X570D4U board
ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 359 ++++++++++++++++++
3 files changed, 361 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
--
2.43.0
next reply other threads:[~2023-11-28 23:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-28 23:23 Renze Nicolai [this message]
2023-11-28 23:23 ` [PATCH v2 1/2] dt-bindings: arm: aspeed: add Asrock X570D4U board Renze Nicolai
2023-11-29 8:23 ` Krzysztof Kozlowski
2023-11-28 23:23 ` [PATCH v2 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC Renze Nicolai
2023-12-01 2:09 ` Zev Weiss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231128232456.2932350-1-renze@rnplus.nl \
--to=renze@rnplus.nl \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox