From: Sasha Levin <sashal@kernel.org>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH AUTOSEL 6.6 19/21] ARM: dts: Fix TPM schema violations
Date: Fri, 2 Feb 2024 13:40:06 -0500 [thread overview]
Message-ID: <20240202184015.540966-19-sashal@kernel.org> (raw)
In-Reply-To: <20240202184015.540966-1-sashal@kernel.org>
From: Lukas Wunner <lukas@wunner.de>
[ Upstream commit 8412c47d68436b9f9a260039a4a773daa6824925 ]
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for ARM
devicetrees:
The nodename needs to be "tpm at 0" rather than "tpmdev at 0" and the
compatible property needs to contain the chip's name in addition to the
generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c":
tpmdev at 0: $nodename:0: 'tpmdev at 0' does not match '^tpm(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
tpm at 2e: compatible: 'oneOf' conditional failed, one must be fixed:
['tcg,tpm-tis-i2c'] is too short
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
Fix these schema violations.
Aspeed Facebook BMCs use an Infineon SLB9670:
https://lore.kernel.org/all/ZZSmMJ%2F%2Fl972Qbxu at fedora/
https://lore.kernel.org/all/ZZT4%2Fw2eVzMhtsPx at fedora/
https://lore.kernel.org/all/ZZTS0p1hdAchIbKp at heinlein.vulture-banana.ts.net/
Aspeed Tacoma uses a Nuvoton NPCT75X per commit 39d8a73c53a2 ("ARM: dts:
aspeed: tacoma: Add TPM").
phyGATE-Tauri uses an Infineon SLB9670:
https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel at phytec.de/
A single schema violation remains in am335x-moxa-uc-2100-common.dtsi
because it is unknown which chip is used on the board. The devicetree's
author has been asked for clarification but has not responded so far:
https://lore.kernel.org/all/20231220090910.GA32182 at wunner.de/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts | 4 ++--
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 4 ++--
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 2 +-
arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 4 ++--
arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +-
arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi | 2 +-
7 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index e899de681f47..5be0e8fd2633 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -45,8 +45,8 @@ spi1_gpio: spi1-gpio {
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
- tpmdev at 0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm at 0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index a677c827e758..5a8169bbda87 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -80,8 +80,8 @@ spi_gpio: spi {
gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- tpmdev at 0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm at 0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 3f6010ef2b86..213023bc5aec 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -456,7 +456,7 @@ &i2c1 {
status = "okay";
tpm: tpm at 2e {
- compatible = "tcg,tpm-tis-i2c";
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
reg = <0x2e>;
};
};
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 31590d3186a2..00e5887c926f 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -35,8 +35,8 @@ spi_gpio: spi {
gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
- tpmdev at 0 {
- compatible = "tcg,tpm_tis-spi";
+ tpm at 0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index ea627638e40c..7dd1fe5a2fb7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -121,7 +121,7 @@ &ecspi1 {
tpm_tis: tpm at 1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
- compatible = "tcg,tpm_tis-spi";
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
spi-max-frequency = <20000000>;
interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index 3a723843d562..9984b343cdf0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -130,7 +130,7 @@ &ecspi4 {
* TCG specification - Section 6.4.1 Clocking:
* TPM shall support a SPI clock frequency range of 10-24 MHz.
*/
- st33htph: tpm-tis at 0 {
+ st33htph: tpm at 0 {
compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
index b8730aa52ce6..a59331aa58e5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi
@@ -217,7 +217,7 @@ &spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
- tpm_spi_tis at 0 {
+ tpm at 0 {
compatible = "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <500000>;
--
2.43.0
parent reply other threads:[~2024-02-02 18:40 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20240202184015.540966-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240202184015.540966-19-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).