From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v6 05/22] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
Date: Tue, 12 Mar 2024 14:15:37 +0800 [thread overview]
Message-ID: <20240312061556.496605-6-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240312061556.496605-1-Delphine_CC_Chiu@wiwynn.com>
Revise quad mode to dual mode to avoid WP pin influnece the SPI
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f8bfdefbefc6..23006dca5f26 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -149,15 +149,17 @@ flash at 0 {
status = "okay";
m25p,fast-read;
label = "bmc";
- spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
+#include "openbmc-flash-layout-128.dtsi"
};
flash at 1 {
status = "okay";
m25p,fast-read;
label = "bmc2";
- spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
};
};
--
2.25.1
next prev parent reply other threads:[~2024-03-12 6:15 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-12 6:15 [PATCH v6 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 01/22] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 02/22] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 03/22] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 04/22] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-03-12 6:15 ` Delphine CC Chiu [this message]
2024-03-12 6:15 ` [PATCH v6 06/22] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 07/22] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 08/22] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 09/22] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 10/22] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 11/22] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 12/22] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 13/22] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 14/22] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 15/22] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 16/22] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 17/22] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 18/22] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 19/22] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 20/22] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 21/22] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-03-12 6:15 ` [PATCH v6 22/22] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-03-12 14:33 ` [PATCH v6 00/22] Add i2c-mux and eeprom devices for Meta Yosemite 4 Rob Herring
2024-03-18 5:22 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240312061556.496605-6-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox