From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v13 18/29] ARM: dts: aspeed: yosemite4: add mctp config for NIC
Date: Wed, 21 Aug 2024 17:40:29 +0800 [thread overview]
Message-ID: <20240821094043.4126132-19-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20240821094043.4126132-1-Delphine_CC_Chiu@wiwynn.com>
add mctp config for NIC
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index b46a0b9940e2..7b8a2384d99d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1281,40 +1281,64 @@ imux24: i2c at 0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux25: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux26: i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux27: i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+ mctp-controller;
temperature-sensor at 1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor at 3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
};
};
--
2.25.1
next prev parent reply other threads:[~2024-08-21 9:40 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 9:40 [PATCH v13 00/29] Add i2c-mux and eeprom devices for Meta Yosemite 4 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 01/29] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 02/29] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 03/29] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 04/29] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 05/29] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 06/29] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 07/29] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 08/29] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-08-21 9:52 ` Krzysztof Kozlowski
2024-08-21 9:40 ` [PATCH v13 09/29] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 10/29] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 11/29] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 12/29] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 13/29] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 14/29] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 15/29] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 16/29] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 17/29] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-08-21 9:40 ` Delphine CC Chiu [this message]
2024-08-21 9:40 ` [PATCH v13 19/29] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 20/29] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 21/29] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 22/29] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 23/29] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 24/29] ARM: dts: aspeed: yosemite4: add XDP710 Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 25/29] ARM: dts: aspeed: yosemite4: add RTQ6056 support Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 26/29] ARM: dts: aspeed: yosemite4: add MP5990 support Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 27/29] ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 28/29] ARM: dts: aspeed: yosemite4: fix GPIO linename typo Delphine CC Chiu
2024-08-21 9:40 ` [PATCH v13 29/29] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41) Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240821094043.4126132-19-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox