From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 2/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for four NICs
Date: Thu, 3 Oct 2024 15:42:43 +0800 [thread overview]
Message-ID: <20241003074251.3818101-3-Delphine_CC_Chiu@wiwynn.com> (raw)
In-Reply-To: <20241003074251.3818101-1-Delphine_CC_Chiu@wiwynn.com>
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Add i2c-mux on Spider board for four NICs and add the temperature sensor
and EEPROM for the NICs.
Also remove the mctp-controller property on I2C bus 15 because we need
to add the property on the I2C mux to each NIC so that the MCTP driver
will ensure that each port is configured properly before communicating
with the NICs.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 75 ++++++++++++++++++-
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 5d623d0355df..fc8af704fe20 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -26,6 +26,10 @@ aliases {
i2c21 = &imux21;
i2c22 = &imux22;
i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
i2c34 = &imux34;
i2c35 = &imux35;
};
@@ -1168,8 +1172,9 @@ adc at 35 {
};
&i2c15 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
- mctp-controller;
multi-master;
bus-frequency = <400000>;
@@ -1180,9 +1185,73 @@ mctp at 10 {
i2c-mux at 72 {
compatible = "nxp,pca9544";
- idle-state = <0>;
- i2c-mux-idle-disconnect;
reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imux24: i2c at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux25: i2c at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux26: i2c at 2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ imux27: i2c at 3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mctp-controller;
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
};
};
--
2.25.1
next prev parent reply other threads:[~2024-10-03 7:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 7:42 [PATCH v3 0/9] Add I2C mux devices for yosemite4 Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 1/9] ARM: dts: aspeed: yosemite4: add i2c-mux for all Server Board slots Delphine CC Chiu
2024-10-03 7:42 ` Delphine CC Chiu [this message]
2024-10-03 7:42 ` [PATCH v3 3/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 4/9] ARM: dts: aspeed: yosemite4: Add required properties for IOE on fan boards Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 5/9] ARM: dts: aspeed: yosemite4: correct the compatible string for max31790 Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 6/9] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 7/9] ARM: dts: aspeed: yosemite4: Change the address of Fan IC on " Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 8/9] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards Delphine CC Chiu
2024-10-03 7:42 ` [PATCH v3 9/9] ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board Delphine CC Chiu
2024-10-04 0:39 ` [PATCH v3 0/9] Add I2C mux devices for yosemite4 Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241003074251.3818101-3-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox