[PATCH v2 00/10] soc: aspeed: lpc-snoop: Miscellaneous fixes

[Andrew Jeffery <andrew@codeconstruct.com.au>]

Henry's bug[1] and fix[2] prompted some further inspection by
Jean.

This series provides fixes for the remaining issues Jean identified, as
well as reworking the channel paths to reduce cleanup required in error
paths. It is based on v6.16-rc1.

Lightly tested under qemu and on an AST2600 EVB. Further testing on
platforms designed around the snoop device appreciated.

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=219934
[2]: https://lore.kernel.org/all/20250401074647.21300-1-bsdhenrymartin@gmail.com/

Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
Changes in v2:
- Address comments on v1 from Jean
- Implement channel indexing using enums to avoid unnecessary tests
- Switch to devm_clk_get_enabled()
- Use dev_err_probe() where possible
- Link to v1: https://patch.msgid.link/20250411-aspeed-lpc-snoop-fixes-v1-0-64f522e3ad6f@codeconstruct.com.au

---
Andrew Jeffery (10):
      soc: aspeed: lpc-snoop: Cleanup resources in stack-order
      soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
      soc: aspeed: lpc-snoop: Ensure model_data is valid
      soc: aspeed: lpc-snoop: Constrain parameters in channel paths
      soc: aspeed: lpc-snoop: Rename 'channel' to 'index' in channel paths
      soc: aspeed: lpc-snoop: Rearrange channel paths
      soc: aspeed: lpc-snoop: Switch to devm_clk_get_enabled()
      soc: aspeed: lpc-snoop: Use dev_err_probe() where possible
      soc: aspeed: lpc-snoop: Consolidate channel initialisation
      soc: aspeed: lpc-snoop: Lift channel config to const structs

 drivers/soc/aspeed/aspeed-lpc-snoop.c | 224 +++++++++++++++++-----------------
 1 file changed, 110 insertions(+), 114 deletions(-)
---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250401-aspeed-lpc-snoop-fixes-e5d2883da3a3

Best regards,
-- 
Andrew Jeffery <andrew@codeconstruct.com.au>