* [PATCH v1 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
@ 2025-09-17 7:53 Kevin Tung
2025-09-18 0:39 ` Rob Herring (Arm)
0 siblings, 1 reply; 2+ messages in thread
From: Kevin Tung @ 2025-09-17 7:53 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, Geert Uytterhoeven, Magnus Damm, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, linux-renesas-soc
Add device tree for the Meta (Facebook) Yosemite5 compute node,
based on the AST2600 BMC.
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components. The BMC also
logs relevant events and performs appropriate system actions in
response to abnormal conditions.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite5.dts | 1063 +++++++++++++++++
1 file changed, 1063 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 000000000000..9210504d96d5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Yosemite 5 BMC";
+ compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c16 = &i2c5mux0ch0;
+ i2c17 = &i2c5mux0ch1;
+ i2c18 = &i2c5mux0ch2;
+ i2c19 = &i2c5mux0ch3;
+ i2c20 = &i2c5mux1ch0;
+ i2c21 = &i2c5mux1ch1;
+ i2c22 = &i2c5mux1ch2;
+ i2c23 = &i2c5mux1ch3;
+ i2c24 = &i2c6mux0ch0;
+ i2c25 = &i2c6mux0ch1;
+ i2c26 = &i2c6mux0ch2;
+ i2c27 = &i2c6mux0ch3;
+ i2c28 = &i2c8mux0ch0;
+ i2c29 = &i2c8mux0ch1;
+ i2c30 = &i2c8mux0ch2;
+ i2c31 = &i2c8mux0ch3;
+ i2c32 = &i2c30mux0ch0;
+ i2c33 = &i2c30mux0ch1;
+ i2c34 = &i2c30mux0ch2;
+ i2c35 = &i2c30mux0ch3;
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ spi_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+ status = "okay";
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+ "IOEXP_INT_3V3","FM_ID_LED","","",
+ /*C0-C7*/ "","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "FM_BMC_MUX1_SEL","","","",
+ "","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+ "SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+ /*N0-N7*/ "led-postcode-0","led-postcode-1","led-postcode-2",
+ "led-postcode-3","led-postcode-4","led-postcode-5",
+ "led-postcode-6","led-postcode-7",
+ /*O0-O7*/ "RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+ "PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+ "RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+ "I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+ /*R0-R7*/ "THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+ "CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "FM_DBP_BMC_PRDY_N","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+ "BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+ /*X0-X7*/ "","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+ /*Y0-Y7*/ "","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B7*/ "","","","","FM_BOARD_BMC_REV_ID0",
+ "FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+ status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+ status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* Socket 0 SBRMI */
+ sbrmi@3c {
+ compatible = "amd,sbrmi";
+ reg = <0x3c>;
+ };
+
+ /* Socket 0 SBTSI */
+ sbtsi@4c {
+ compatible = "amd,sbtsi";
+ reg = <0x4c>;
+ };
+};
+
+&i2c4 {
+ multi-master;
+ mctp-controller;
+ status = "okay";
+
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ /* OCP NIC TEMP */
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ /* OCP NIC FRU EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* I2C MUX for MCIO 1A */
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c5mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ /* I2C MUX for MCIO 0A */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c5mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* I2C MUX for PWRPIC #13 ~ #16 */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* PWRPIC #13 */
+ i2c6mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #14 */
+ i2c6mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #16 */
+ i2c6mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #15 */
+ i2c6mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ power-monitor@14 {
+ compatible = "infineon,xdp710";
+ reg = <0x14>;
+ };
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ /* PADDLE BD IOEXP */
+ gpio-expander@41 {
+ compatible = "nxp,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "HSC_OC_GPIO0", "HSC_OC_GPIO1",
+ "HSC_OC_GPIO2", "HSC_OC_GPIO3";
+ };
+
+ power-sensor@42 {
+ compatible = "ti,ina238";
+ reg = <0x42>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@43 {
+ compatible = "lltc,ltc4287";
+ reg = <0x43>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@47 {
+ compatible = "ti,tps25990";
+ reg = <0x47>;
+ ti,rimon-micro-ohms = <430000000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ /* PDB FRU */
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ /* Paddle BD FRU */
+ eeprom@57 {
+ compatible = "atmel,24c128";
+ reg = <0x57>;
+ };
+
+ power-monitor@58 {
+ compatible = "renesas,isl28022";
+ reg = <0x58>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@59 {
+ compatible = "renesas,isl28022";
+ reg = <0x59>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@5a {
+ compatible = "renesas,isl28022";
+ reg = <0x5a>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@5b {
+ compatible = "renesas,isl28022";
+ reg = <0x5b>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ psu@5c {
+ compatible = "renesas,raa228006";
+ reg = <0x5c>;
+ };
+
+ fan-controller@5e{
+ compatible = "maxim,max31790";
+ reg = <0x5e>;
+ };
+
+ /* I2C MUX for PWRPIC #1, #2, #11, #12 */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* PWRPIC #1 */
+ i2c8mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #2 */
+ i2c8mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #12 (Connector to CXL BD) */
+ i2c8mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c30mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c30mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c30mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1e {
+ compatible = "ti,adc128d818";
+ reg = <0x1e>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ /* CXL BD IOEXP */
+ gpio-expander@27 {
+ compatible = "nxp,pca9535";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+ "ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+ "ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+ "RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+ "DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+ "JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+ "DDR_CH13_I2C_MUX_SEL","SYS_OK",
+ "CXL_VRHOT_ALERT_R1_N","";
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp75";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp432";
+ reg = <0x4c>;
+ };
+
+ power-sensor@4d {
+ compatible = "ti,ina230";
+ reg = <0x4d>;
+ shunt-resistor = <2000>;
+ };
+
+ temperature-sensor@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ /* CXL FRU */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c30mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ /* PWRPIC #11 */
+ i2c8mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ /* SCM FRU */
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ /* BSM FRU */
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+ status = "okay";
+
+ /* E1S EB IOEXP0 */
+ gpio-expander@21 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+ "E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+ "E1S_0_PWRDIS","ALERT_INA_0",
+ "","",
+ "RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+ "E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+ "E1S_1_PWRDIS","ALERT_INA_1",
+ "","";
+ };
+
+ /* E1S EB IOEXP1 */
+ gpio-expander@22 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+ "P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+ "FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+ "PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+ "PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+ "","",
+ "","",
+ "PWRGD_P3V3_AUX","ALERT_TEMP";
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina233";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ ti,maximum-expected-current-microamp = <32768000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina233";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ ti,maximum-expected-current-microamp = <32768000>;
+ };
+
+ adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ /* E1S EB FRU */
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* MB IOEXP */
+ gpio-expander@21 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+ "ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+ "FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+ "FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+ "RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+ "","FM_BMC_RTC_RST",
+ "FM_P3V_BAT_SCALED_EN","",
+ "FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@43 {
+ compatible = "ti,ina230";
+ reg = <0x43>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+
+ adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ adc@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ adc@4b {
+ compatible = "ti,ads7830";
+ reg = <0x4b>;
+ };
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+ multi-master;
+ mctp-controller;
+ status = "okay";
+
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "national,lm75b";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "national,lm75b";
+ reg = <0x49>;
+ };
+
+ /* CLKGEN FRU */
+ eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ };
+
+ /* MB FRU */
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ /* CPU FRU */
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+/* PROT reserve */
+&i2c14 {
+ status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+ status = "okay";
+};
+
+&kcs2 {
+ aspeed,lpc-io-reg = <0xca8>;
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&mac2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+ ncsi-package = <1>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+};
+
+&sgpiom0 {
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+ gpio-line-names =
+ /*"input pin","output pin"*/
+ /*bit0-bit7*/
+ "PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+ "PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+ "PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+ "host0-ready","FM_I3C_SPD_AH_SEL_R",
+ "PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+ "PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+ "PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+ "","FM_JTAG_BMC_OE_1_R_N",
+ /*bit8-bit15*/
+ "PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+ "PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+ "PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+ "PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+ "PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+ "PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+ "PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+ "PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+ /*bit16-bit23*/
+ "PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+ "PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+ "PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+ "IBB_BMC_SRST","RST_SMB_NIC_R_N",
+ "PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+ "PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+ "RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+ "PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+ /*bit24-bit31*/
+ "PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+ "PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+ "PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+ "PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+ "PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+ "ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+ "ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+ "ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+ /*bit32-bit39*/
+ "ALERT_INA230_E1S_1_N","",
+ "ALERT_INA230_FAN0_N","",
+ "ALERT_INA230_FAN1_N","",
+ "ALERT_INA230_FAN2_N","",
+ "ALERT_INA230_FAN3_N","",
+ "ALERT_INA230_NIC_N","",
+ "ALERT_INA230_SCM_N","",
+ "ALERT_IRQ_PMBUS_PWR11_N","",
+ /*bit40-bit47*/
+ "ALERT_MCIO2A_LEAK_DETECT_N","",
+ "ALERT_MCIO3A_LEAK_DETECT_N","",
+ "ALERT_MCIO4A_LEAK_DETECT_N","",
+ "ALERT_OC_PADDLE2_N","",
+ "ALERT_OC_PWR2_N","",
+ "ALERT_OC_PWR11_N","",
+ "ALERT_PADDLE2_SMB_N","",
+ "ALERT_PWR14_SB2_LEAK_DETECT_N","",
+ /*bit48-bit55*/
+ "ALERT_PWR14_SB3_LEAK_DETECT_N","",
+ "ALERT_PWR15_SB2_LEAK_DETECT_N","",
+ "ALERT_PWR15_SB3_LEAK_DETECT_N","",
+ "ALERT_SMB_MCIO0A_N","",
+ "ALERT_SMB_MCIO1A_N","",
+ "ALERT_SMB_MCIO2A_N","",
+ "ALERT_SMB_MCIO2B_N","",
+ "ALERT_SMB_MCIO3A_N","",
+ /*bit56-bit63*/
+ "ALERT_SMB_MCIO3B_N","",
+ "ALERT_SMB_MCIO4A_N","",
+ "ALERT_SMB_MCIO4B_N","",
+ "ALERT_THERMALTRIP_MCIO1A_N","",
+ "ALERT_THERMALTRIP_MCIO2A_N","",
+ "ALERT_THERMALTRIP_MCIO3A_N","",
+ "ALERT_THERMALTRIP_MCIO4A_N","",
+ "ALERT_UV_PADDLE2_N","",
+ /*bit64-bit71*/
+ "ALERT_UV_PWR2_N","",
+ "ALERT_UV_PWR11_N","",
+ "ALERT_VR_SMB_N","",
+ "FAULT_FAN_0_N","",
+ "FAULT_FAN_1_N","",
+ "FAULT_FAN_2_N","",
+ "FAULT_FAN_3_N","",
+ "FAULT_P3V3_E1S_0_N","",
+ /*bit72-bit79*/
+ "FAULT_P3V3_E1S_1_N","",
+ "FAULT_P3V3_NIC_N","",
+ "FAULT_P12V_NIC_N","",
+ "FAULT_P12V_SCM_N","",
+ "P0_I3C_APML_ALERT_L","",
+ "ALERT_INLET_TEMP_N","",
+ "FM_CPU_PROCHOT_R_N","",
+ "FM_CPU_THERMTRIP_N","",
+ /*bit80-bit87*/
+ "ALERT_OUTLET_TEMP_N","",
+ "ALERT_RTC_N","",
+ "PVDDCR_CPU0_P0_OCP_N","",
+ "PVDDCR_CPU1_P0_OCP_N","",
+ "PVDDCR_SOC_P0_OCP_N","",
+ "MB_IOEXP_INT","",
+ "E1S_0_BD_IOEXP","",
+ "E1S_1_BD_IOEXP","",
+ /*bit88-bit95*/
+ "PADDLE_BD_IOEXP_INT","",
+ "FM_BOARD_REV_ID0","",
+ "FM_BOARD_REV_ID1","",
+ "FM_BOARD_REV_ID2","",
+ "FM_VR_TYPE_ID0","",
+ "FM_VR_TYPE_ID1","",
+ "PRSNT_BOOT_N_IOEXP","",
+ "PRSNT_DATA_N_IOEXP","",
+ /*bit96-bit103*/
+ "PRSNT_NIC_N_IOEXP","",
+ "PRSNT_BOOT_N_FF","",
+ "PRSNT_MCIO1A_N_FF","",
+ "NIC_PRSNT_N","",
+ "","",
+ "","",
+ "","",
+ "","",
+ /*bit104-bit111*/
+ "","","","","","","","","","","","","","","","",
+ /*bit112-bit119*/
+ "","","","","","","","","","","","","","","","",
+ /*bit120-bit127*/
+ "","","","","","","","","","","","","","","","";
+ status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+ status = "okay";
+
+ flash@0 {
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <12000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ status = "okay";
+ };
+};
+
+/* Host Console */
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+/* SOL */
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+ status = "okay";
+};
--
2.47.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
2025-09-17 7:53 [PATCH v1 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC Kevin Tung
@ 2025-09-18 0:39 ` Rob Herring (Arm)
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring (Arm) @ 2025-09-18 0:39 UTC (permalink / raw)
To: Kevin Tung
Cc: linux-arm-kernel, linux-renesas-soc, Andrew Jeffery, Magnus Damm,
linux-aspeed, devicetree, Joel Stanley, linux-kernel,
Geert Uytterhoeven, Conor Dooley, Krzysztof Kozlowski
On Wed, 17 Sep 2025 15:53:32 +0800, Kevin Tung wrote:
> Add device tree for the Meta (Facebook) Yosemite5 compute node,
> based on the AST2600 BMC.
>
> The Yosemite5 platform provides monitoring of voltages, power,
> temperatures, and other critical parameters across the motherboard,
> CXL board, E1.S expansion board, and NIC components. The BMC also
> logs relevant events and performs appropriate system actions in
> response to abnormal conditions.
>
> Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
> ---
> .../aspeed/aspeed-bmc-facebook-yosemite5.dts | 1063 +++++++++++++++++
> 1 file changed, 1063 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: failed to guess base
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250917075334.4044607-1-kevin.tung.openbmc@gmail.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: / (facebook,yosemite5-bmc): compatible: 'oneOf' conditional failed, one must be fixed:
'facebook,yosemite5-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc']
'facebook,yosemite5-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'facebook,wedge400-data64-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc']
'facebook,yosemite5-bmc' is not one of ['ampere,mtjefferson-bmc', 'ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,clemente-bmc', 'facebook,cloudripper-bmc', 'facebook,darwin-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,fuji-data64-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,santabarbara-bmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,sbp1-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'nvidia,gb200nvl-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc']
'aspeed,ast2400' was expected
'aspeed,ast2500' was expected
from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /: failed to match any schema with compatible: ['facebook,yosemite5-bmc', 'aspeed,ast2600']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: ethernet@1e670000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-package' was unexpected)
from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-09-18 0:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-17 7:53 [PATCH v1 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC Kevin Tung
2025-09-18 0:39 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).