From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: devicetree@vger.kernel.org, andrew@codeconstruct.com.au,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
eajames@linux.ibm.com
Subject: [PATCH v6 7/7] ARM: dts: aspeed: Fix max31785 fan node naming
Date: Thu, 18 Sep 2025 13:04:02 -0500 [thread overview]
Message-ID: <20250918180402.199373-8-eajames@linux.ibm.com> (raw)
In-Reply-To: <20250918180402.199373-1-eajames@linux.ibm.com>
Now that the max31785 is properly documented, fix up the uses of
it in the Aspeed dts.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 ++--
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 ++++----
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 ++++++------
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 8 ++++----
4 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
index 2f5d4075a64ad..c2a4153bdcf49 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -276,13 +276,13 @@ max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 9f144f527f03b..2f42482d98df2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2065,25 +2065,25 @@ max31785@52 {
#size-cells = <0>;
reg = <0x52>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index c5fb5d410001b..bbe26f950821e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1079,37 +1079,37 @@ max: max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan2: fan@2 {
+ fan2: fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan3: fan@3 {
+ fan3: fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
- fan4: fan@4 {
+ fan4: fan-4 {
compatible = "pmbus-fan";
reg = <4>;
tach-pulses = <2>;
};
- fan5: fan@5 {
+ fan5: fan-5 {
compatible = "pmbus-fan";
reg = <5>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index b31eb8e58c6b4..91d514567cba5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -480,7 +480,7 @@ max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
@@ -493,7 +493,7 @@ fan@0 {
maxim,fan-fault-pin-mon;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
@@ -506,7 +506,7 @@ fan@1 {
maxim,fan-fault-pin-mon;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
@@ -519,7 +519,7 @@ fan@2 {
maxim,fan-fault-pin-mon;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
--
2.51.0
next prev parent reply other threads:[~2025-09-18 18:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 18:03 [PATCH v6 0/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:03 ` [PATCH v6 1/7] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-18 18:03 ` [PATCH v6 2/7] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-09-18 18:03 ` [PATCH v6 3/7] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-09-18 18:03 ` [PATCH v6 4/7] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-09-18 18:04 ` [PATCH v6 5/7] dt-bindings: hwmon: max31790: Document address and size cells Eddie James
2025-09-18 23:01 ` Rob Herring
2025-09-18 18:04 ` [PATCH v6 6/7] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-18 18:04 ` Eddie James [this message]
2025-09-18 22:33 ` [PATCH v6 0/7] " Rob Herring (Arm)
2025-09-18 22:59 ` Rob Herring
2025-09-22 14:35 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250918180402.199373-8-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).