From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <dlechner@baylibre.com>, <nuno.sa@analog.com>,
<andy@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <joel@jms.id.au>,
<andrew@codeconstruct.com.au>, <billy_tsai@aspeedtech.com>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v1 2/2] iio: adc: aspeed: Add AST2700 ADC support
Date: Mon, 3 Nov 2025 18:52:17 +0800 [thread overview]
Message-ID: <20251103105217.1764355-2-billy_tsai@aspeedtech.com> (raw)
In-Reply-To: <20251103105217.1764355-1-billy_tsai@aspeedtech.com>
This patch adds support for the ADCs found on the Aspeed AST2700 SoC,
which includes two instances: "ast2700-adc0" and "ast2700-adc1". While
they are functionally similar to those on AST2600, the OTP trimming data
is located at the same offset (0x820), but uses different bitfields.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
drivers/iio/adc/aspeed_adc.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 8ab29948214a..9df6e7f68f19 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -646,6 +646,16 @@ static const struct aspeed_adc_trim_locate ast2600_adc1_trim = {
.field = GENMASK(7, 4),
};
+static const struct aspeed_adc_trim_locate ast2700_adc0_trim = {
+ .offset = 0x820,
+ .field = GENMASK(3, 0),
+};
+
+static const struct aspeed_adc_trim_locate ast2700_adc1_trim = {
+ .offset = 0x820,
+ .field = GENMASK(7, 4),
+};
+
static const struct aspeed_adc_model_data ast2400_model_data = {
.model_name = "ast2400-adc",
.vref_fixed_mv = 2500,
@@ -690,11 +700,35 @@ static const struct aspeed_adc_model_data ast2600_adc1_model_data = {
.trim_locate = &ast2600_adc1_trim,
};
+static const struct aspeed_adc_model_data ast2700_adc0_model_data = {
+ .model_name = "ast2700-adc0",
+ .min_sampling_rate = 10000,
+ .max_sampling_rate = 500000,
+ .wait_init_sequence = true,
+ .bat_sense_sup = true,
+ .scaler_bit_width = 16,
+ .num_channels = 8,
+ .trim_locate = &ast2700_adc0_trim,
+};
+
+static const struct aspeed_adc_model_data ast2700_adc1_model_data = {
+ .model_name = "ast2700-adc1",
+ .min_sampling_rate = 10000,
+ .max_sampling_rate = 500000,
+ .wait_init_sequence = true,
+ .bat_sense_sup = true,
+ .scaler_bit_width = 16,
+ .num_channels = 8,
+ .trim_locate = &ast2700_adc1_trim,
+};
+
static const struct of_device_id aspeed_adc_matches[] = {
{ .compatible = "aspeed,ast2400-adc", .data = &ast2400_model_data },
{ .compatible = "aspeed,ast2500-adc", .data = &ast2500_model_data },
{ .compatible = "aspeed,ast2600-adc0", .data = &ast2600_adc0_model_data },
{ .compatible = "aspeed,ast2600-adc1", .data = &ast2600_adc1_model_data },
+ { .compatible = "aspeed,ast2700-adc0", .data = &ast2700_adc0_model_data },
+ { .compatible = "aspeed,ast2700-adc1", .data = &ast2700_adc1_model_data },
{ }
};
MODULE_DEVICE_TABLE(of, aspeed_adc_matches);
--
2.25.1
next prev parent reply other threads:[~2025-11-03 10:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 10:52 [PATCH v1 1/2] dt-bindings: iio: adc: Add AST2700 ADC compatible strings Billy Tsai
2025-11-03 10:52 ` Billy Tsai [this message]
2025-11-03 15:20 ` [PATCH v1 2/2] iio: adc: aspeed: Add AST2700 ADC support David Lechner
2025-11-09 15:03 ` Jonathan Cameron
2025-11-04 10:08 ` [PATCH v1 1/2] dt-bindings: iio: adc: Add AST2700 ADC compatible strings Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251103105217.1764355-2-billy_tsai@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox