[PATCH v5 2/2] ARM: dts: aspeed: Add NVIDIA MSX4 HPM

[Marc Olberding <molberding@nvidia.com>]

The NVIDIA MSX4 HPM (host platform module) is a reference
board for managing up to 8 PCIe connected NVIDIA GPU's via
ConnectX-8 (CX8) SuperNICs. The BMC manages all GPU's and CX8's
for both telemetry and firmware update via MCTP over USB.
The host CPU's are dual socket Intel Granite Rapids processors.

For more detail on this architecture:
https://developer.nvidia.com/blog/nvidia-connectx-8-supernics-advance-ai-platform-architecture-with-pcie-gen6-connectivity/

Signed-off-by: Marc Olberding <molberding@nvidia.com>
---
 arch/arm/boot/dts/aspeed/Makefile                  |   1 +
 .../boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts | 246 +++++++++++++++++++++
 2 files changed, 247 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 0f0b5b7076545e6babb2f25f302b5d70b71d8a19..c3ce0d218b53f2b4c37061cace483f5f2c6d3bf1 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
 	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-nvidia-msx4-bmc.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
 	aspeed-bmc-opp-nicole.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
new file mode 100644
index 0000000000000000000000000000000000000000..44f95a3986cb9e2c6902ba9b3c1ed56e782438b3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "AST2600 MSX4 BMC";
+	compatible = "nvidia,msx4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			compatible = "shared-dma-pool";
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			reusable;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		status = "okay";
+		#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		status = "okay";
+	};
+};
+
+&gfx {
+	memory-region = <&gfx_memory>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"ASSERT_BMC_READY","","","","","","","",
+	/*C0-C7*/	"MON_PWR_GOOD","","","","","","","FP_ID_LED_N",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","FP_LED_STATUS_GREEN_N","FP_LED_STATUS_AMBER_N",
+			"","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"MON_PWR_BTN_L","ASSERT_PWR_BTN_L","MON_RST_BTN_L",
+			"ASSERT_RST_BTN_L","","ASSERT_NMI_BTN_L","","",
+	/*Q0-Q7*/	"","","MEMORY_HOT_0","MEMORY_HOT_1","","","","",
+	/*R0-R7*/	"ID_BTN","","","","","VBAT_GPIO","","",
+	/*S0-S7*/	"","","RST_PCA_MUX","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","BMC_INIT_DONE","";
+};
+
+// Devices on these busses are available after POST
+// however there isn't a great way to defer probing
+// until that point today, as the BMC doesn't
+// have direct control over when the host completes
+// POST, especially from the kernel.
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c256";
+		reg = <0x51>;
+		pagesize = <64>;
+		label = "sku";
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&video {
+	memory-region = <&video_engine_memory>;
+	status = "okay";
+};

-- 
2.34.1