From: Rebecca Cran <rebecca@bsdio.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: Rebecca Cran <rebecca@bsdio.com>, Billy Tsai <billy_tsai@aspeedtech.com>
Subject: [PATCH v4 0/2] Add device tree for ASRock Rack ALTRAD8 BMC
Date: Thu, 11 Dec 2025 06:37:17 -0700 [thread overview]
Message-ID: <20251211133721.18269-1-rebecca@bsdio.com> (raw)
The ASRock Rack ALTRAD8 BMC is an Aspeed AST2500-based BMC for the
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards with an Ampere Altra
processor. The BMC runs OpenBMC.
These patches add a device tree and binding for the BMC.
**Changes between v3 and v4**
- Re-added system fault LED after verifying it works with an
LED connected to the AUX header.
- Fixed GPIOs based on Tan's feedback.
- Dropped DT schema commit in favour of Rob's changes.
**Testing**
Ran `make ARCH=arm CHECK_DTBS=y aspeed/aspeed-bmc-asrock-altrad8.dtb`.
Rebecca Cran (2):
dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board
ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts | 625 ++++++++++++++++++++
3 files changed, 627 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts
--
2.47.3
next reply other threads:[~2025-12-11 13:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-11 13:37 Rebecca Cran [this message]
2025-12-11 13:37 ` [PATCH v4 1/2] dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board Rebecca Cran
2025-12-11 13:37 ` [PATCH v4 2/2] ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC Rebecca Cran
2025-12-11 15:38 ` Tan Siewert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251211133721.18269-1-rebecca@bsdio.com \
--to=rebecca@bsdio.com \
--cc=andrew@codeconstruct.com.au \
--cc=billy_tsai@aspeedtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox