From: Anirudh Srinivasan <anirudhsriniv@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: anirudhsriniv@gmail.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] ARM: dts: aspeed: Add Asus IPMI card
Date: Sun, 11 Jan 2026 14:10:32 -0600 [thread overview]
Message-ID: <20260111201040.162880-3-anirudhsriniv@gmail.com> (raw)
In-Reply-To: <20260111201040.162880-1-anirudhsriniv@gmail.com>
Add device tree for Asus IPMI card, an AST2600 BMC PCIe card
Signed-off-by: Anirudh Srinivasan <anirudhsriniv@gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asus-ipmi-card.dts | 136 ++++++++++++++++++
2 files changed, 137 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-ipmi-card.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 9adf9278dc94..ff40d9ab88b7 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-asrock-spc621d8hm3.dtb \
aspeed-bmc-asrock-x570d4u.dtb \
aspeed-bmc-asus-x4tf.dtb \
+ aspeed-bmc-asus-ipmi-card.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-ipmi-card.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-ipmi-card.dts
new file mode 100644
index 000000000000..fea94360245c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-ipmi-card.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Anirudh Srinivasan
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ASUS IPMI Card BMC";
+ compatible = "asus,ipmi-card-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial4:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ video_engine_memory: video {
+ size = <0x04000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-fault {
+ gpios = <&gpio1 ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ default-state = "off";
+ };
+
+ led-heartbeat {
+ gpios = <&gpio0 ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ };
+};
+
+&mdio2 {
+ status = "okay";
+
+ ethphy2: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac2 {
+ status = "okay";
+
+ /* Bootloader sets up the MAC to insert delay */
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0 0*/ "", "", "", "", "", "", "", "BMC_HBLED",
+ /*B0 8*/ "", "", "", "", "", "", "", "",
+ /*C0 16*/ "", "", "", "", "", "", "", "",
+ /*D0 24*/ "", "", "", "", "", "", "", "",
+ /*E0 32*/ "", "", "", "", "", "", "", "",
+ /*F0 40*/ "", "", "", "", "", "", "", "",
+ /*G0 48*/ "", "", "", "", "", "", "", "",
+ /*H0 56*/ "", "", "", "", "", "", "", "",
+ /*I0 64*/ "", "", "", "BMC_RSTBTN", "", "", "", "",
+ /*J0 72*/ "", "", "", "", "", "", "", "",
+ /*K0 80*/ "", "", "", "", "", "", "", "",
+ /*L0 88*/ "", "", "", "", "", "", "", "",
+ /*M0 96*/ "", "", "", "", "", "", "", "",
+ /*N0 104*/ "", "", "", "", "", "", "", "",
+ /*O0 112*/ "", "", "", "", "", "", "", "",
+ /*P0 120*/ "", "", "", "", "", "", "", "",
+ /*Q0 128*/ "", "", "", "", "", "", "", "",
+ /*R0 136*/ "", "", "", "", "", "", "", "",
+ /*S0 144*/ "", "", "", "", "", "", "", "",
+ /*T0 152*/ "", "", "", "", "", "", "", "",
+ /*U0 160*/ "", "", "", "", "", "", "", "",
+ /*V0 168*/ "", "", "", "", "BMC_PWRBTN", "", "MB_S0_DETECT", "",
+ /*W0 176*/ "", "", "", "", "", "", "", "",
+ /*X0 184*/ "", "", "", "", "", "", "", "",
+ /*Y0 192*/ "", "", "", "", "", "", "", "",
+ /*Z0 200*/ "", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0 0*/ "","","","","","","","",
+ /*18B0 8*/ "","","","","","","","",
+ /*18C0 16*/ "","","","","","BMC_MLED","","",
+ /*18D0 24*/ "","","","","","","","",
+ /*18E0 32*/ "","","","","","","","";
+};
--
2.52.0
next prev parent reply other threads:[~2026-01-11 23:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-11 20:10 [PATCH 0/2] Add device tree for Asus IPMI Card Anirudh Srinivasan
2026-01-11 20:10 ` [PATCH 1/2] dt-bindings: arm: aspeed: Add Asus IPMI card Anirudh Srinivasan
2026-01-12 1:31 ` Andrew Jeffery
2026-01-12 11:47 ` Krzysztof Kozlowski
2026-01-12 21:21 ` Anirudh Srinivasan
2026-01-13 0:57 ` Andrew Jeffery
2026-01-13 22:28 ` Anirudh Srinivasan
2026-01-15 1:03 ` Andrew Jeffery
2026-01-15 4:38 ` Anirudh Srinivasan
2026-01-11 20:10 ` Anirudh Srinivasan [this message]
2026-01-11 21:09 ` [PATCH 2/2] ARM: dts: " Andrew Lunn
2026-01-11 21:26 ` Anirudh Srinivasan
2026-01-12 1:47 ` Andrew Jeffery
2026-01-12 2:35 ` Anirudh Srinivasan
2026-01-12 11:48 ` Krzysztof Kozlowski
2026-01-12 21:16 ` Anirudh Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260111201040.162880-3-anirudhsriniv@gmail.com \
--to=anirudhsriniv@gmail.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox