[PATCH 3/3] aspeed/pinctrl: Fix simultaneous DVO and serial outputs on AST2500 devices

[Timothy Pearson <tpearson@raptorengineering.com>]

There appears to be a significant error in the pinmux table starting on
page 127 of the AST2500 datasheet v1.6.  Specifically, the COND2 (DVO)
requirement is incorrectly applied to multiple digital video input (DVI)
muxed pins, and no DVI-specific condition is provided.  This results in
the serial devices incorrectly overriding the DVO pinmuxes and disabling
the DVO pins.

Create a new condition code (COND6) for DVI enable, and update the most
seriously affected pins to use the new condition code.

Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 6f357a11e89a..676f90d3c5f3 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -29,6 +29,7 @@
 
 #define COND1		{ ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
 #define COND2		{ ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define COND6		{ ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
 
 /* LHCR0 is offset from the end of the H8S/2168-compatible registers */
 #define LHCR0		0x20
@@ -660,8 +661,8 @@ SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
 
 #define T1 89
 #define T1_DESC		SIG_DESC_SET(SCU84, 17)
-SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
-SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND6);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND6);
 MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
 FUNC_GROUP_DECL(NDCD1, T1);
 
@@ -674,22 +675,22 @@ FUNC_GROUP_DECL(NDSR1, U1);
 
 #define U2 91
 #define U2_DESC		SIG_DESC_SET(SCU84, 19)
-SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
-SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND6);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND6);
 MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
 FUNC_GROUP_DECL(NRI1, U2);
 
 #define P4 92
 #define P4_DESC		SIG_DESC_SET(SCU84, 20)
-SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
-SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND6);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND6);
 MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
 FUNC_GROUP_DECL(NDTR1, P4);
 
 #define P3 93
 #define P3_DESC		SIG_DESC_SET(SCU84, 21)
-SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
-SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND6);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND6);
 MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
 FUNC_GROUP_DECL(NRTS1, P3);
 
-- 
2.11.0