* [PATCH v3] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel
@ 2025-06-16 9:14 Marshall Zhan
2025-06-18 3:13 ` Andrew Jeffery
0 siblings, 1 reply; 2+ messages in thread
From: Marshall Zhan @ 2025-06-16 9:14 UTC (permalink / raw)
To: patrick, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery
Cc: Marshall Zhan, Delphine CC Chiu, devicetree, linux-arm-kernel,
linux-aspeed, linux-kernel
From: Marshall Zhan <marshall_zhan@wiwynn.com>
Add gpio line name to support multiplexed console
Signed-off-by: Delphine CC Chiu <delphine_cc_chiu@wiwynn.com>
Signed-off-by: Marshall Zhan <marshall_zhan@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 29f224bccd63..aae789854c52 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -189,6 +189,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+ "SLOT1_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -235,6 +240,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+ "SLOT2_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -281,6 +291,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+ "SLOT3_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -327,6 +342,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+ "SLOT4_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -373,6 +393,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+ "SLOT5_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -419,6 +444,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+ "SLOT6_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -465,6 +495,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+ "SLOT7_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
@@ -511,6 +546,11 @@ gpio@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+ "SLOT8_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel
2025-06-16 9:14 [PATCH v3] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel Marshall Zhan
@ 2025-06-18 3:13 ` Andrew Jeffery
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Jeffery @ 2025-06-18 3:13 UTC (permalink / raw)
To: Marshall Zhan, patrick, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Joel Stanley
Cc: Delphine CC Chiu, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel
On Mon, 2025-06-16 at 17:14 +0800, Marshall Zhan wrote:
> From: Marshall Zhan <marshall_zhan@wiwynn.com>
Can you please fix your setup to eliminate the From: line? It's your
own patch sent from your address, we shouldn't end up in this state.
Also, can you please capitalise 'ARM:' in the subject?
Andrew
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-06-18 3:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-16 9:14 [PATCH v3] arm: dts: aspeed: yosemite4: add gpio name for uart mux sel Marshall Zhan
2025-06-18 3:13 ` Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).